Skip to main content

Pay in 4! Select Klarna at checkout, we will contact you with instructions. Learn More>>

Filter By:

Rear

Campagnolo Super Record EPS Rear Derailleur
$780.00
Campagnolo's Super Record EPS Rear Derailleur's arresting beauty is entwined with the pinnacle in rear shifting accuracy and precision. Campagnolo uses an advanced-parallelogram design and the extremely high-quality servo motors for precise, fast shifting of up to all 11 gears from a single push of a button. Or stop on any cog and the position sensor makes micro-adjustments to ensure perfect alignment. And this top-tier Italian bike jewelry is constructed from carbon and cold-forged aluminum to create an ultra strong and extremely light derailleur. Plus, the pulleys roll on super-efficient ceramic bearings and are made from a special rubber that renders the drivetrain virtually silent.
SRAM XX1 Eagle AXS Rear Derailleur
$700.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
Shimano Dura-Ace 9150 Di2 11-Speed Rear Derailleur
$696.99
- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
SRAM RED eTap Rear Derailleur
$649.00
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
Shimano Deore XT M8050-GS Di2 Shadow Plus Rear Derailleur
$338.99
Shimano Deore XT RD-M8050 Di2 Rear Derailleur - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Seamless gear change even under high load - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Drivetrain Speeds: 11 - Maximum Sprocket: 42T(2x11-speed)/46T(1x11-speed) - Minimum Sprocket: 11T - Front Difference: 10T - Total Capacity: 35T - Average Weight: 320 grams
SRAM RED WiFLi Rear Derailleur
$300.00
With SRAM's WiFLi RED Rear Derailleur, SRAM set out to make their already race-proven design faster, quieter, and able to accommodate a full 11-32 cassette for a huge gear range. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Fast, quiet, and capable, the RED derailleur delivers!
Shimano Ultegra RD-X805 Di2 Rear Derailleur
$299.99
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t
SRAM XX1 Type 2.1 Rear Derailleur
$298.00
This one takes all your trail dreams, from XC to enduro, all the way to eleven. SRAM's XX1 rear derailleur packs a massive amount of technology into its compact, lightweight body. It uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
Shimano Ultegra R8050 Di2 Shadow Rear Derailleur
$286.99
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
SRAM RED Rear Derailleur
$280.00
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
SRAM X01 DH X-HORIZON Rear Derailleur
$252.00
The 7-speed X-HORIZON rear derailleur makes shifting smooth and reliable no matter where you ride. Engineered to maintain consistent chain gap across all seven gears, X-HORIZON eliminates vertical movement for faster shifting, reduced shift force, and an end to ghost shifting. Our new, Type-3 roller bearing clutch features a smoother torque curve for a quieter, more consistent operation and feel. The 12-tooth X-SYNC pulley wheel holds the chain in place, reducing bounce and chain slap. Additionally, CAGE LOCK technology makes wheel removal and installation easier than ever. Paired with the X01 DH 7-speed shifter, X-HORIZON forms the backbone of X-ACTUATION technology—and that means completely smooth shifting action. - Updated design of the rear derailleur incorporates our proven X-HORIZON design and new Type-3 roller bearing clutch technology - 12-tooth X-SYNC pulley wheels - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings
SRAM Force 1 Rear Derailleur
$225.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
SRAM Ceramic Bearing Rear Derailleur Pulleys
$150.00
SRAM's Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container.
SRAM GX Eagle Rear Derailleur
$150.00
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts
SRAM RED eTap Ceramic Bearing Rear Derailleur Pulleys
$150.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
SRAM Force WiFli Rear Derailleur
$122.00
SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.
Shimano XT M8100 Rear Derailleur for 1x Drivetrains
$118.99
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
Campagnolo Veloce Rear Derailleur (Medium-Cage)
$115.00
Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.
Paul Component Engineering Melvin Chain Tensioner
$113.50
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
SRAM Force 22 WiFLi Rear Derailleur
$110.00
Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.
Shimano Deore XT Rear Derailleur
$106.99
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
Shimano Deore XT Shadow + Rear Derailleur (Long Cage)
$103.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
Shimano Ultegra R8000 Shadow Rear Derailleur
$103.99
Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)
SRAM Force Rear Derailleur
$101.00
Incredibly fast, buttery smooth and impressively precise gear changes are here with SRAM's Force Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.
SRAM Force 22 Rear Derailleur
$93.00
Incredibly fast, astonishingly quiet and impressively precise — fly through all 11 gears with SRAM's Force 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 at a svelte 178 grams.
SRAM NX 1x11 X-Horizon Rear Derailleur
$89.00
The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. - X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - Fully compatible with all SRAM MTB 1x drivetrains - Most affordable fully featured 1x rear derailleur in the industry - Speeds: 11-speed - Weight: 322 grams - Color: Black - Compatibility: X-ACTUATION - Bearings: Steel - Cage Size: Long - Max Tooth: 42
SRAM XX1 Ceramic Bearing Rear Derailleur Pulleys
$79.00
SRAM's XX1 Ceramic Bearing Rear Derailleur Pulleys run on super-smooth, efficient ceramic bearings so your drivetrain rolls with ease. They are lighter than conventional pulleys and even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe.
Shimano SLX Shadow Plus 11-Speed Rear Derailleur
$76.99
- Rider Tuned For Sharp And Silky Shifts - 20% Light Shifting Operation - New Shadow Design With Optimized Slant Angle - Optislick New Shift Cable With New Hyper Low-Friction Coating Technology - Chain Stability Improved - New Shadow Design With Optimized Slant Angle For Stable Gear Position - Efficient Shifting And Smoother Driving - Efficient Pulley Teeth Design - Increased Traction Range For Long-Travel And Active Rear Suspension - Series : SLX: SLX - Maximum Sprocket : 42T(2x11-speed) or 46T(1x11-speed) - Minimum Sprocket : 11T: 34-38T - Front Difference : 10T: 48.8 - Total Capacity : 41T: 66-69 - Average Weight : 323g: 145.6g
Shimano ZEE Shadow + Rear Derailleur
$73.99
Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.
Shimano 105 RD-R7000 Rear Derailleur
$61.99
Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible
Page 1 of 2 Next page