Sold in 5" increments. Suitable for 10-12 grip and basket changes. Low melting point allows easy installation and removal of pole parts. Does not become brittle in cold weather. Heat carefully with heat gun or flame. Peel off excess glue and reuse. Packaging may vary.
Rollerski ferrules for any poles with 10 mm shaft diameter. Carbide tips. Sold in Pairs.
Sold in Pairs.
Quick exchangeable basket for roller skiing with carbide tip. According to FIS regulations. Compatible with all 9 mm shafts
This is Swix's newer design for 10mm pole tips. This version is slightly lighter than the original roller ferrule design . Carbide spike can be resharpened with diamond stone many times. Fits 10mm shaft tips. Glue on shaft. Sold in pairs.
For carving skis and snowboards. For sharpening, deburring and polishing steel edges. Best used with water. Diamond Files provide the cutting ability of a file and the deburring and polishing ability of a stone all in one tool. The Diamond Files are perfect to carry in the pocket for quick removal of the fine burrs created on the edge when skiing or riding on aggressive man-made snow. Swix Diamond stones have taken the technology one step further. The diamond fabric has been adhered to the flat, true aluminum piece to assure that there is no pressure rollover when sharpening side and base bevels. This special diamond cluster pattern will last longer than conventional diamond strips. The configuration in conjunction with a polishing agent will help in moving the excess material from the edge to leave a clean, smooth mirror finish. FEATURES: - Red / Coarse 200 grit - light cutting to reestablish the edge bevel - Economical diamond grit pattern mounted on a durable aluminum plate for excellent grip and control - Use with polishing solution for enhanced longevity and sharpening performance. - Dimensions: 103 mm x 24 mm x 4.5 mm; diamond area is 80 mm x 20 mm
Sold in pairs. Innovative glueless collet design fits TBS shafts only (Triac TBS, Star TBS, Team TBS and Carbon TBS).
Super durable and affordable ferrule option for rollerskiing. Carbide spike can be resharpened with diamond stone many times. Specify size when ordering. Require sharpening. Sold in pairs.
VP-RSTD10G5 Latest in spring tip evolution and the G series from V2. From V2: V2 has a worldwide reputation for good roller ski ferrules. We tried many different carbide formulations before we found the best compromise between hardness and strength. Carbide is very brittle, and if not securely held in the plastic housing the tip can easily break. We developed geometry between the carbide tip and plastic that for over twenty years has been bulletproof. When we decided to make a shock-absorbing ferrule, we knew from experience that spring loading the carbide tip was not the answer. We wanted the shock-absorbing feature to be independent of the carbide tip. The major advantage is that if the shock-absorbing spring should fail, the carbide tip remains intact and the skier is still able to pole. For the G3 version, we changed the spring retainer from a plastic unit to a high-strength 4mm socket bolt. We are now able to use a smaller diameter spring with a higher damping force. As can be seen in the graph below, the damping stroke has been increased by approximately 40%. The spring force when the damping plunger first hits the pavement is lower on G3 than on the previous models, but after only 1.5mm of compression the force is equal to starting force of G1 & G2, and then increases rapidly. When the carbide tip penetrates the pavement the damping force of G3 is more than 2 times greater than G1 and G2. The result is greater shock absorption. Another advantage with G3 is that if the spring should fail it can be replaced by removing the nut and 4mm bolt. This was not possible in the G1 and G2 version REPLACING THE SPRING OR ALTERING THE LENGTH OF THE DAMPING STROKE Tools required: 3mm Allen wrench (supplied) and 7mm wrench (not supplied). The damping stroke can be shortened by tightening the nut. We do not recommend lengthening the damping stroke by loosening the nut. To replace the spring, or bolt, simply place the 3mm Allen wrench in the head of the socket bolt and with the 7mm wrench remove the nut and install a new spring or bolt. When supplied the bolt is covered with a light layer of grease. If the spring-loaded device is not moving smoothly compress the spring by pushing the bolt against a solid object and put grease on the non-threaded portion of the bolt.
Page 1 of 1