Ski Wax

Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.

Original Blue 5º- 28.4ºF The king of glide waxes! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. Undefeatable choice for base waxing and training. Often the best solution for a recreational skier. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush. Original Purple 28.4º…41°F Popular glide wax from zero to mild frosts, especially on humid snow. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush.

New dirt-repelling and glide-enhancing conditioner for mohair grip insert skis. Safe to use on all ski brands. Apply to a cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free.

Effective cleaner for all skin skis. Safe for all manufacturers' mohair inserts. Hydrocarbon-free, does not weaken the glue of the insert. After treatment, apply Rex Skin Care spray or Hydrex 2 fluoro liquid to enhance the glide properties and dirt repellency of the grip zone.

The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -.4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold

Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?

A simplified klister line up from Toko. BASE GREEN: cold klister and binder BLUE: -22F to 19F snow temperature, great for cold, refrozen, icy conditions. RED: 18F to 30F snow temperature, great all purpose for frozen or damp conditions. YELLOW: 28F TO 32F snow temperature, ideal for wet corn snow or slop.

Highly effective GripSpray for fast/ clean/ and durable grip application with outstanding adhesion. - Base Green: Used as the foundation for other GripSprays (or other klisters or grip waxes) and greatly improves abrasion resistance and durability. - Universal: Universal klister formula

New dirt-repelling and glide-enhancing conditioner for mohair grip insert skis. Safe to use on all ski brands. Apply to a cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free.

More sliding & less sticking! Simply wipe on the entire length of your waxless ski for better glide, less sticking and more fun. Containers stow easily. Don't leave home without 'em! Fluoro-free.

Pure Race liquid glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax processed with organic solvents gives excellent performance and good durability to the products in all weather conditions. At its best when used on top of PURE BASE WAX. After wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush and again with a nylon brush. POLAR: For cold, dry snow, -25/-5°C (-13/23ºF) COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

MULTIGRADE (21F to 42F) This one is killer in coarse snow and when the tracks are falling apart. If you're building a klister collection, this better be in there! SPECIAL BLUE (10F to 25F) This one isn't as tough as Chola, but other waxes bond to it more easily so you can also cover it with hard wax in cold, abrasive new snow. BLUE (23F to 32F) When the track is thawed and refrozen. This is for the blazing fast hold-on-to-your-hats type of days! Don't be afraid of klister! Imagine rollerski kick with melt-your face speed! That is what spring skiing is all about. VIOLET SPECIAL (23F to 30F) This is the ticket as a binder for cold snow under blue hardwax! VIOLET (27F to 32F) This is the ticket as a binder for cold snow under blue hardwax! RED (28F to 39F) This needs to be in your box, as you'll want to try mixing it with other waxes to increase speed and prevent icing. SPECIAL RED (32F to 37F) Great for wet snow or mixing to prevent icing and speed up other waxes. SILVER (31F to 34F) Mix this stuff in where the snow is dirty to maintain speed and prevent icing. SILVER EXTRA (32F to 39F) For very dirty snow. UNIVERSAL (32F)

Time-proven base klister. Extremely durable. Apply with torch or heat gun to aide in application.

SG 10 GREEN (-22F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow.Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG 8 BLUE ( 10F to 20): A great basic glider for training and racing when humidity is <55%. SG 6 PURPLE (20F to 27F): A great basic glider for training and racing when humidity is <55%.

The original universal grip tape. Apply to a clean and dry kick zone and enjoy up to several hundred Ks of good kick if you keep the tape clean. Cork aggressively to "refresh".

RCR50 Is a klister every racer should have in their box. It is a modified version of our Universal wide intended for high humidity, glazing tracks and artificial snow from 20F up to 38F. This wax is used consistently by several World Cup teams as well as the Start Finland domestic racing service.

One of the few truly universal waxes available. It is able to glide in cold temperatures and kick when the snow warms up. This wax outperforms other klisters in fresh snow conditions while simultaneously is able to kick in transformed ice crystals. In racing, this wax can be used as a mix with another klister, or under a cover wax. The versatility of this mix is in part due to its composition of klister raw materials, terva(tar), and aluminum. The aluminum additive prevents the formation of ice around freezing, when snow is in transition between solid and liquid state. The special ingredient is the terva which enables the wax to kick in warm conditions and remain fast on cold snow. The tar that is used in Uni Wide is created through the dry distillation of Finnish pine trees. What remains is a unqiue thermoplastic that transforms with changes in temperature. In a thin application, the tar hardens and creates a shell to protect from fresh ice crystals. In a thick application, the tar acts as a cusion layer to provide kick on rounded and transformed ice crystals. Application: Begin with a thin application of base klister or base klister spray. Then apply Universal Klister in a chevron pattern along the kick zone of your ski. Tech tip: apply a thin layer for fresh snow conditions, and a thicker layer for transformed snow conditions. Rub in an even layer with your thumb or synthetic cork. When racing, allow the skis to sit base down on the snow for a brief period of time to allow the hard shell to form, remove any excess snow sticking to the base and go ski.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Durable base binder for added durability. Base binders are essential for long outings or marathons. Apply to a clean kick zone by touching stick to a warm wax iron and then dabbing to the ski. Warm again on ski with iron and cork out to a smooth finish. Let cool before applying he wax of the day.

Keep your skins skis from grinding to a halt when wet snow, around freezing, can cause the skis to ice up so that Skin skis can be problematic in wet or dirty snow as the snow can stick to the skin and cause that nasty situation of a ski that doesn't grip but also doesn't glide. Skin inserts need occasional treatment to resist this situation and of course Swix has come up with a solution that is easy to use and performs admirably. Application: Rub on to the skin using a back and forth motion to coat the hairs of the skin. Dry for 30 min. before skiing or applying Swix Skin Boost.

Start Anti Ice Glider is liquid icing prevent glider created especially for no wax skis based on nanotechnology. Anti Ice is packed in handy plastic bottle equipped with sponge to ensure easy and equal apply to the ski base. After applying let dry about five minutes and ski is ready for use. Anti Ice Glider improves gliding in no wax skis without reducing grip abilities. Treatment with silicon content liquids are not recommended by ski produces. One treatment with Anti Ice is enough for ten kilometer skiing.

All new Start RG Glider series are next generation, fluoro free, technoceramic gliders. RG Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)

RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml

The KX klisters are durable klisters custom-made for different conditions.

Universal silver klister for recreational and racing skiers. Gives a great kick. K21S UNI SILVER KLISTER 3C TO -5C (23°F to 38°F) K22 UNI VM KLISTER -3C TO 10C (27°F to 50°F)

Universal liquid wax for cross-country skis with mechanical climbing aid. For all kinds of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski preparation at home Biodegradable

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski and snowboard preparation at home Biodegradable Also used as rust protection for ski edges

Ecological hydrocarbon hot wax for training sessions and taking care of ski and snowboard bases. Biodegradable Resealable wax case Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F