Ski Wax

Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.

Original Blue 5º- 28.4ºF The king of glide waxes! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. Undefeatable choice for base waxing and training. Often the best solution for a recreational skier. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush. Original Purple 28.4º…41°F Popular glide wax from zero to mild frosts, especially on humid snow. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush.

New dirt-repelling and glide-enhancing conditioner for mohair grip insert skis. Safe to use on all ski brands. Apply to a cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free.

Effective cleaner for all skin skis. Safe for all manufacturers' mohair inserts. Hydrocarbon-free, does not weaken the glue of the insert. After treatment, apply Rex Skin Care spray or Hydrex 2 fluoro liquid to enhance the glide properties and dirt repellency of the grip zone.

With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold

Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?

A simplified klister line up from Toko. BASE GREEN: cold klister and binder BLUE: -22F to 19F snow temperature, great for cold, refrozen, icy conditions. RED: 18F to 30F snow temperature, great all purpose for frozen or damp conditions. YELLOW: 28F TO 32F snow temperature, ideal for wet corn snow or slop.

Highly effective GripSpray for fast/ clean/ and durable grip application with outstanding adhesion. - Base Green: Used as the foundation for other GripSprays (or other klisters or grip waxes) and greatly improves abrasion resistance and durability. - Universal: Universal klister formula

New dirt-repelling and glide-enhancing conditioner for mohair grip insert skis. Safe to use on all ski brands. Apply to a cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free.

More sliding & less sticking! Simply wipe on the entire length of your waxless ski for better glide, less sticking and more fun. Containers stow easily. Don't leave home without 'em! Fluoro-free.

MULTIGRADE (21F to 42F) This one is killer in coarse snow and when the tracks are falling apart. If you're building a klister collection, this better be in there! SPECIAL BLUE (10F to 25F) This one isn't as tough as Chola, but other waxes bond to it more easily so you can also cover it with hard wax in cold, abrasive new snow. BLUE (23F to 32F) When the track is thawed and refrozen. This is for the blazing fast hold-on-to-your-hats type of days! Don't be afraid of klister! Imagine rollerski kick with melt-your face speed! That is what spring skiing is all about. VIOLET SPECIAL (23F to 30F) This is the ticket as a binder for cold snow under blue hardwax! VIOLET (27F to 32F) This is the ticket as a binder for cold snow under blue hardwax! RED (28F to 39F) This needs to be in your box, as you'll want to try mixing it with other waxes to increase speed and prevent icing. SPECIAL RED (32F to 37F) Great for wet snow or mixing to prevent icing and speed up other waxes. SILVER (31F to 34F) Mix this stuff in where the snow is dirty to maintain speed and prevent icing. SILVER EXTRA (32F to 39F) For very dirty snow. UNIVERSAL (32F)

Time-proven base klister. Extremely durable. Apply with torch or heat gun to aide in application.

SG 10 GREEN (-22F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow.Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG 8 BLUE ( 10F to 20): A great basic glider for training and racing when humidity is <55%. SG 6 PURPLE (20F to 27F): A great basic glider for training and racing when humidity is <55%.

MountainFlow offers one of the world's only high-performance, plant-based ski + snowboard waxes. PLANT-BASED: mountainFLOW wax is made from 100% plant-based ingredients. 0% PETROLEUM: Most wax is made from petroleum and anything that is applied to skis/snowboard enters directly into the environment. WICKED FAST: Performs as well as a conventional (petroleum-based) ski wax - we’ve run controlled performance tests to prove it! BIODEGRADABLE + NON-TOXIC: mountainFLOW is safe for both the user and the environment SIZE: 130 grams PRO TIPS: Use a sharp scraper. Beer helps too!

Rex 30G Kick Wax Additive 30gm (16/34F New Snow) is specially formulated for new snow. Cover a blue hard wax with this for better grip in colder, new-falling soft snow.

The original universal grip tape. Apply to a clean and dry kick zone and enjoy up to several hundred Ks of good kick if you keep the tape clean. Cork aggressively to "refresh".

One of the few truly universal waxes available. It is able to glide in cold temperatures and kick when the snow warms up. This wax outperforms other klisters in fresh snow conditions while simultaneously is able to kick in transformed ice crystals. In racing, this wax can be used as a mix with another klister, or under a cover wax. The versatility of this mix is in part due to its composition of klister raw materials, terva(tar), and aluminum. The aluminum additive prevents the formation of ice around freezing, when snow is in transition between solid and liquid state. The special ingredient is the terva which enables the wax to kick in warm conditions and remain fast on cold snow. The tar that is used in Uni Wide is created through the dry distillation of Finnish pine trees. What remains is a unqiue thermoplastic that transforms with changes in temperature. In a thin application, the tar hardens and creates a shell to protect from fresh ice crystals. In a thick application, the tar acts as a cusion layer to provide kick on rounded and transformed ice crystals. Application: Begin with a thin application of base klister or base klister spray. Then apply Universal Klister in a chevron pattern along the kick zone of your ski. Tech tip: apply a thin layer for fresh snow conditions, and a thicker layer for transformed snow conditions. Rub in an even layer with your thumb or synthetic cork. When racing, allow the skis to sit base down on the snow for a brief period of time to allow the hard shell to form, remove any excess snow sticking to the base and go ski.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Durable base binder for added durability. Base binders are essential for long outings or marathons. Apply to a clean kick zone by touching stick to a warm wax iron and then dabbing to the ski. Warm again on ski with iron and cork out to a smooth finish. Let cool before applying he wax of the day.

Keep your skins skis from grinding to a halt when wet snow, around freezing, can cause the skis to ice up so that Skin skis can be problematic in wet or dirty snow as the snow can stick to the skin and cause that nasty situation of a ski that doesn't grip but also doesn't glide. Skin inserts need occasional treatment to resist this situation and of course Swix has come up with a solution that is easy to use and performs admirably. Application: Rub on to the skin using a back and forth motion to coat the hairs of the skin. Dry for 30 min. before skiing or applying Swix Skin Boost.

The legendary Rex RCF makes a comeback, in liquid form! Not just “quick wax” or “instant glide”, RCF is a full-blown racing performance high fluor liquid wax series with completely new recipes and a new, better applicator sponge. PFOA-free with Rex FUTURE FLUOR™ technology. Fast and durable POWER POLYMERS™ wax blend with advanced 2-STEP CARRIER™ -solvent technology. -RCF Blue UHW™ (5F to 28F) High fluor Rex Blue, featuring World Cup level wax technology. Like all Rex blues, RCF Blue is at its best on all snow types. -RCF Pink UHW™ (-4F to 41F) For old/ artificial/ coarse snow, and works well even on new snow when it’s really cold. -RCF Graphite UHW™ (10F to 36F) The RCF for new snow. Formulated specially for the snow type rather than temperature. Contains a precisely defined amount of graphite. **Apply onto ski base that has been cleaned with Rex Glide Cleaner, let dry and brush with a nylon brush.

Start Anti Ice Glider is liquid icing prevent glider created especially for no wax skis based on nanotechnology. Anti Ice is packed in handy plastic bottle equipped with sponge to ensure easy and equal apply to the ski base. After applying let dry about five minutes and ski is ready for use. Anti Ice Glider improves gliding in no wax skis without reducing grip abilities. Treatment with silicon content liquids are not recommended by ski produces. One treatment with Anti Ice is enough for ten kilometer skiing.

All new Start RG Glider series are next generation, fluoro free, technoceramic gliders. RG Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)

RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml

The KX klisters are durable klisters custom-made for different conditions.

Universal silver klister for recreational and racing skiers. Gives a great kick. K21S UNI SILVER KLISTER 3C TO -5C (23°F to 38°F) K22 UNI VM KLISTER -3C TO 10C (27°F to 50°F)

Universal liquid wax for cross-country skis with mechanical climbing aid. For all kinds of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski preparation at home Biodegradable

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski and snowboard preparation at home Biodegradable Also used as rust protection for ski edges

Ecological hydrocarbon hot wax for training sessions and taking care of ski and snowboard bases. Biodegradable Resealable wax case Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F

Performance Hot Wax for racing and training, fluorine free. - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) -Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.