Ski Wax

Rode Racing Liquids come in Cold, Med and Warm. These waxes are durable and fast out of the gate. Simple to use and a sponge applicator is included for easily spreading the product. This sponge also stays saturated maximizing the use of the bottle. Non aerosol. Rode is one of the very few companies using an aluminum bottle for decreased plastic waste. For increased speed and durability use the Rode Wool Roto. All temperatures listed are snow temperatures. ****Tech Tip- Put on the night before skiing and buff with Rode Wool Roto Buffer and then brush out with nylon or horsehair aggressively the next day for increased initial speed and durability.**** Racing Liquid Cold -5C to -15C (5F to 23F). Really good in newer cold snow and at lower humidity. This wax can really fly in the right conditions. Racing Liquid Med -2C to -7C (19F to 28F). This one is a monster. If we were to recommend one liquid wax to have it would be RLM. Good in a variety of snow types and in the key temp range of the 20s This won about 70% of our fluoro free wax tests last year. We simply cannot say enough about this wax. Racing Liquid Warm -3C to 0C 26F to 32F RLW is a versatile warm solution especially when the humidity remains below 50%.

PURE PRO fluoro-free glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellence performance and good durability to the products in all weather conditions. Especially in natural snow. The PURE PRO POLAR Powder wax is Vauhti's best base for very cold natural snow. It is usually used as a base under a liquid or block (wool applied) top coats. -Temperature ranges of -13/23F (-5C/-25C). -Comes in a 35g container with a perforated lid for easy sprinkling. -Melts like a paraffin wax, unlike the bad-old fluoro powders, thus is used more of like a base wax, but is also used as a top coat in some situations

Kit contains 120g Base Performance Yellow, Red, and Blue, a 3mm Plexiscraper, a Nylon Brush, a Red (fine) DMT diamond file, and a edge grinding rubber all in a nice case.

Yellow NF11 (28F - 35F) New and old snow. The softest wax in the NF series. Compared to traditional waxes NF11 is a relatively hard and "dry" wax. Blue NF21 (17F - 28F) All types of snow. Rex's most slippery fluoride-free wax ever! New Snow NF21G (10F - 35F) Intended for new snow and containing a precisely optimized amount of graphite, NF21G completes Rex's NF series. Hardness is between NF11 yellow and NF21 blue. Green NF31 (-4F - 17F) All types of snow. Hard and durable for cold conditions. Melting point: approx. 140°C.

Yellow NF11 (28F - 50F) New and old snow. The softest wax in the NF series. Compared to traditional waxes NF11 is a relatively hard and "dry" wax. Blue NF21 (10F - 28F) All types of snow. Rex's most slippery fluoride-free wax ever! New Snow NF21G (10F - 35F) Intended for new snow and containing a precisely optimized amount of graphite, NF21G completes Rex's NF series. Hardness is between NF11 yellow and NF21 blue. Pink Green NF41 (-4F - 41F) Wet and coarse snow. Extremely hard UHW polymer wax mixture raises the durability A wear-resistant and easy-to-apply choice for alpine skiing and snowboarding!

LIMIT ONE PER CUSTOMER New from the World Cup testing rigors; beating the old HF21 in new and old snow types. Very effective both above and below the indicated temp range. Use a high-quality, high temp iron. Temp Range: 10/28F -8/-2C

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

NEW PFC FREE Toko 125 ML Liquid Paraffin Wax. Where high performance meets convenience! Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: Hard liquid wax for snow temperatures -22/14 °F, air temp -22/16 °F. 0-60% relative humidity. Red: Medium hard liquid wax for snow temperatures 10/25°F, air temp 12/28 °F. 40-80% relative humidity. Yellow: Soft liquid wax for snow temperatures 21/32 °F, air temp 25/50 °F. 80-100% relative humidity. -Wide application range for common conditions in the medium snow temperature range. -Very long-lasting wax adhesion. -Can also be used as adhesion promoter for top finish products. -Fast processing. -For brushing/polishing use the Polishing Brush Liquid Paraffin

Individual Retail Value $77 -Rex Skin Care for repelling dirt and enhancing glide, this conditioner is applied directly to the skins. Safe for all brands of skis. Apply to the Rex Fiber Cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free. 85ml -Rex Skin Cleaner for all skin skis. Safe for all manufacturers' mohair inserts. It is hydrocarbon-free and does not weaken the glue of the insert. Use before Rex Skin Care. 170ml -Rex Glide Cleaner cleans and conditions the base of your skis. Apply generously to cloth or Rex Fiber Cloth, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. --Rex Fiber Cloth for cleaning and polishing skis. 30ml roll.

The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. The Thunderbolt Plus is a blend of paraffin wax and two non-Fluorocarbon speed additives. It is a non-Fluorocarbon replacement for the HSF line of Fast Wax. Use when humidity is greater than 50%. The second additive when combined with Thunderbolt gives this wax increased durability and glide. Thunderbolt Plus 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt Plus 20 • Peak Range 12° to 28° F • Iron Temperature 284° F Thunderbolt Plus 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt Plus 40 • Peak Range 30° to 50° F • Iron Temperature 257° F

Yellow NF11 (28F - 50F) New and old snow. The softest wax in the NF series. Compared to traditional waxes NF11 is a relatively hard and "dry" wax. Blue NF21 (10F - 28F) All types of snow. Rex's most slippery fluoride-free wax ever! New Snow NF21G (10F - 35F) Intended for new snow and containing a precisely optimized amount of graphite, NF21G completes Rex's NF series. Hardness is between NF11 yellow and NF21 blue. Pink Green NF41 (-4F - 41F) Wet and coarse snow. Extremely hard UHW polymer wax mixture raises the durability A wear-resistant and easy-to-apply choice for alpine skiing and snowboarding!

PURE PRO liquid glide waxes are based on the ingredients used in racing paraffin series and totally new additives, which give excellence performance and good durability to the product. PURE PRO liquid glide waxes have been developed especially for natural snow and fine grained snow. With high-quality solvents liquid waxes absorb effectively into the base and retains the performance of the ski base longer than hot melted paraffins. On its best when used on top of liquid base wax or traditional paraffin waxes. After wax has dry completely brush througly first with nylon brush, then with brass brush and again with nylon brush. PRO WARM for damp snow (26F - 44F) PRO COLD for cold snow conditions (-4F - 28F)

A hard and extra durable glide wax with additive for long distance racing. This block top coat is great in warmer conditions, but often competitive also in colder weather. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. Iron temperature 155°C/311°F. Marathon waxes can be used as a race wax alone or as a base for powders and other top coats.

A hard and extra durable glide wax with additive for long distance racing.The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. Marathon waxes can be used as a race wax alone or as a base for top coats. Iron Temp: 155°C (311°F). Pro: Developed especially for longer distances in newer and clean snow. Great in warmer conditions, but often competitive also in colder weather. Pro Black: Developed especially for wet dirty contaminated snow. The additive is reducing friction against dirt particles. Great in warmer conditions, but often competitive also in colder weather.

Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax

The TSB series are gliders for competition that work extremely well, and are highly durable, on dirty snow and in dry, high friction conditions. This is achieved thanks to the black solid lubricant additive that reduces friction and absorbs less dirt in contaminated snow. Its hardness makes it convenient to work and highly durable. TSB series can be used as a race wax alone or as a base for top coats. -TS5B - 0/14F is the hardest wax in the TSB line and is a great choice in cold conditions. Recommended iron temp.: 160°C (320°F) -TS6B - 10/21F is the second hardest wax in the TSB line and is a great choice in typical winter conditions. Recommended iron temp.: 155°C (311°F). -TS7B - 17/28F is a versatile wax suited for normal winter conditions below the freezing point. It has shown good properties on artificial snow in addition to natural, transformed older snow. Recommended iron temp: 150°C (302°F). -TS8B - 24/39F is made harder than the std TS8. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. Recommended iron temp: 150°C (302°F). -TS10B - 32/50F is made harder than the std. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. Recommended iron temp: 165°C (329°F). APPLICATION The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax.

Swix TSP5 Turquoise -10 / -15 40g. (5ºF-14ºF) TSP5 is the hardest powder in the TSP line and is an excellent choice in cold conditions, both for cross-country and alpine. It is a favorite among servicemen due to its superior durability and dry friction properties. It is made as a powder to make it easier to apply, without compromising the sliding properties. For fresh snow, converted snow and artificial snow. TSP05 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C TSP6 is a very good powder for both alpine and cross country, which has shown great performance on artificial snow in addition to natural snow. TSP7 is a versatile powder suited for normal winter conditions below the freezing point. For fresh, old or man made snow. Good in clean snow. TSP7 can be used as a race powder alone or as a base for top coats. Swix TSP8 Red Fluoride Free Powder -4/4 40g (24.8ºF - 39.2ºF) TSP8 has a softness and unique formulation that makes it perfect on both sides of the freezing point. TSP8 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C. Swix TSP10 Yellow Fluoride Free Powder 40g (32ºF-50ºF) TSP10 is an excellent powder for wet conditions. Especially newer or transformed snow that gets wet for the first time. Despite being a fairly soft powder, the abrasion resistance is very good, and the powder handles long distances well. The speed of the grease gun should be approx. 8-10 sec. on an ice skate or alpine ski. It is important to have a good lubricating iron to get the powder to melt efficiently. TSP10 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C.

RG22 Blue -2…-8°C For all snow types. Developed for mild to medium frosts, the RG22 is our all time fastest fluor free wax! As a block it is hard, but still easy to melt. Developed especially as an underlayer for top coatings, but works extremely well also as a final layer. Scrape while still warm, let cool down and brush. Melting point: ~135°C RG32 Green -8…-20°C For all snow types. A hard and very durable glider for cold conditions. Due to its hardness it is very durable and abrasion resistant. A fluor-free version of HF31 block, that has been upgraded with N-Kinetic level 2 additives. Scrape when still warm, let cool down and brush. Melting point: ~140°C RG12 Yellow. +2…-2°C For all snow types. The softest wax on RG-series. Compared to traditional warm condition gliders the RG12 is relatively hard and not so oily wax. Melting point: ~130°C RG22 Graphite - New Snow Engineered especially for new snow and contains a precisely defined amount of graphite. Hardness is positioned between RG12 Yellow and RG22 Blue. Melting point: ~130°C.

There is nothing like perfect kick on your favorite pair of waxable classic skis. Simplicity is important for skiers learning to kick wax. This wax kit equips classic skiers with tried and true basics for a wide range of snow conditions. No unusual or mysterious waxes here! Apply several thin layers underfoot from your heel 12" to 18" forward of your toes. This area is called the 'kick zone'. Experiment; see what works for you! For cold conditions below 10 degrees F, Swix V20 Green gives reliable kick and makes a durable base for other kick waxes. Swix V40 Blue Extra is perhaps the most popular kick wax ever made, working well from 10 degrees F up to about 30 degrees F. Virtually all seasoned classic skiers use Blue Extra. A true classic! For the warmer days with moist snow, Swix V55 Special Red kicks when the Blue Extra gets too slippery. If V55 is too slippery on a given day, it's time for waxless skis or klister! To use these waxes, one needs a good cork. The Swix Synthetic Cork efficiently smooths each layer onto the kick zone. Also included is a Swix Handy Scraper , Toko Gel Clean , and a roll of Swix Fiberlene to aide in clean-up before the next ski outing.

Kit containing 1 each of Base Green Binder, Yellow, Red, and Blue, a plasto cork, and a multipurpose scraper all in a high quality cordura zippered bag.

Individual Retail Value $67 -Rex Skin Cleaner for all skin skis. Safe for all manufacturers' mohair inserts. It is hydrocarbon-free and does not weaken the glue of the insert. Use before Rex Skin Care. 170ml -Rex Skin Care for repelling dirt and enhancing glide, this conditioner is applied directly to the skins. Safe for all brands of skis. Apply to the Rex Fiber Cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free. 85ml -Rex Fiber Cloth for cleaning and polishing skis. 30ml roll. -Rex Glider Blue (-2…-15°C) Rex Blue is one of the best non-fluorinated gliders in the world. Perfect for the recreational skier as well as for a base wax and for training. -Informational Pamphlet

Contains items needed to care for touring skis including: Skin Proof, Skin Cleaner, Natural Wax 40g, Natural Cork, Nylon Brush, Base Tex, and a Ski Touring Strap

PURE UP liquid glide waxes are intended specifically for active skiers and competitive skiers for training rounds. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellent performance and good durability to the products in all snow types and weather conditions POLAR: For cold, dry snow, -25/-5°C (-13/23ºF) COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

Any Nordic skier who enjoys fast skis will appreciate this gift! Here are some of the most important and popular waxing essentials in the Nordic ski world for glide waxing with hot wax plus a new liquid wax prep twist. Perfect for waxers that already have or are planning on getting a wax profile , wax iron, and a wax iron. In this gift pack: Rex Glide Cleaner Liquid prep for base cleaning and priming for gliders. This represents the "new school" of ski waxing tech. Wipe Rex Glide Cleaner onto the base of the ski and allow to dry thoroughly. After drying, a thin wax layer is left behind as a "primer " layer for later waxes. Two legendary iron-in glide waxes - Start Green for the cold days and Rex Blue for everything else. A fresh, sharp New Moon Wax Scraper - time to retire those old, dull scrapers. Toko Groove Pin - handles grooves of all shapes and sizes: perhaps the handiest little tool at the wax bench! Now that the skis are all waxed up, protect them with some New Moon Ski Sleeves - they keep those fast bases safely separated for the drive to the trail! And for a great trail-head conversation starter, a New Moon Bumper Sticker!

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

NEW Fluor free version of Glide Cleaner. Cleanses the base as well as Rex Remover, but without making the base turn gray and dry. Apply generously to cloth or fiberlene, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. After treatment, Rex Glide Cleaner leaves a very hard and thin layer of Rex UHW hard wax, that acts as an excellent binder for both liquid and solid paraffin waxes. Always start a new glide waxing by cleaning with Rex Glide Cleaner. It will make the attachment and durability of sequent wax layers considerably better. Glides well even on its own on dirty and artificial snow, that is usually found in ski tunnels.

Fluoro Free. The newest test wax from Star. World Cup Performance wax.

NEW! Future Fluorinated 2-way glide surface cleaner/glider. Cleanses the base as well as Rex Remover, but without making the base turn gray and dry. Apply generously to cloth or fiberlene, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. After treatment, Rex Glide Cleaner leaves a very hard and thin layer of glide wax, that acts as an excellent binder for both liquid and solid paraffin waxes. Always start a new glide waxing by cleaning with Rex Glide Cleaner. It will make the attachment and durability of subsequent wax layers considerably better. Glides well even on its own on dirty and artificial snow.

A hard but hydrophobic formula from the Italian race wax wizards. Gaining popularity as a go to base coat and hardener. Excellent for ski marathons with wide range performance in cold starts and warm afternoons. Fluoro-free, hydrocarbon-based wax specifically created to last a long time in any snow condition and humidity while maintaining a stable performance over the course of kilometers and time. It can be used alone or as a base for liquids and top finishes. Requires a high iron temperature of 155C Compliant with the new EUROPEAN STANDARDS ON CHEMISTRY in force from 4/7/2020

TK-73 is a PFOA-free universal fluoro block for subzero conditions and all snow types. You can never make your skis slower with TK-73. Use it as a coating for our gliders, and you are already stepping on to the podium. Rub on skin ski mohair inserts for better dirt repellency and glide. Meets 2020 EU regulations for fluorocarbon