Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Block Gliders

$5.88 - $10.88 $9.00 - $16.00 Up to 35% Off
Rapidly biodegradable hot wax, plant based, for all snow types and conditions.
$11.88 - $12.88 $15.00 - $16.99 Up to 24% Off
White 80gm HS-0 (Below 8F): Extremely hard, cold weather wax best suited for fresh or wind-blown snow near or below zero. Apply with caution as a very hot iron is needed. Popular with many racing teams in the upper Midwest for mid-winter races. Teal 80gm HS-10 (-5F-15F) "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Applies easier than extreme white. Comparable to Swix CH5X. Also available in 500g bulk bars. Blue 80gm HS-20 (12F-28F) Fast Wax Blue is one of our more popular choices. Makes a good "universal" glider for waxers looking for a simple set-up Comparable to Swix CH6X. Also available in 500g bulk bars. Red 80gm HS-30 (22F-32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. 500g bar available for high-volume waxers. Yellow 80gm HS-40 (30F-50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.
$11.88 $15.00 21% Off
• Soy wax blend with plant-based Fluorocarbon alternatives • 25 grams of paste wax • Applicator included • Temperature Range 28F-40F • 7-10 K durability • Smells like cinnamon
$11.88 $19.95 40% Off
MountainFlow offers one of the world's only high-performance, plant-based ski + snowboard waxes. PLANT-BASED: mountainFLOW wax is made from 100% plant-based ingredients. 0% PETROLEUM: Most wax is made from petroleum and anything that is applied to skis/snowboard enters directly into the environment. WICKED FAST: Performs as well as a conventional (petroleum-based) ski wax - we’ve run controlled performance tests to prove it! BIODEGRADABLE + NON-TOXIC: mountainFLOW is safe for both the user and the environment SIZE: 130 grams PRO TIPS: Use a sharp scraper. Beer helps too!
$13.88 $17.50 21% Off
With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold
$13.88 $17.50 21% Off
Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?
$14.00
For all snow conditions and temperatures Good sliding properties in all snow conditions Prevents the base from drying out Biodegradable Without the addition of fluorine Protects against dirt accumulation and oxidisation during storage Resealable wax case Snow temperature 0 °C — -30 °C Air temperature 10 °C — -30 °C Volume 120 g
$15.00 - $120.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
$15.30 $17.00 10% Off
The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -.4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.
$15.30 - $40.00 $17.00 - $40.00 Up to 10% Off
A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).
$16.88 $27.95 40% Off
MountainFlow's race wax delivers exceptional speed and durability while also being eco-friendly and biodegradable. Made with mountainFLOW's exclusive Ceramic Nanotechnology Plant-Based + Non-Fluoro. Rigorously tested and just as fast as any non-fluoro race wax.
$17.00
Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.
$19.00 - $51.30 $19.00 - $57.00 Up to 10% Off
SG 10 GREEN (-22F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow.Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG 8 BLUE ( 10F to 20): A great basic glider for training and racing when humidity is <55%. SG 6 PURPLE (20F to 27F): A great basic glider for training and racing when humidity is <55%.
$22.00
All new Start RG Glider series are next generation, fluoro free, technoceramic gliders. RG Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)
$22.00
Ecological hydrocarbon hot wax for training sessions and taking care of ski and snowboard bases. Biodegradable Resealable wax case Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F
$22.00
Performance Hot Wax for racing and training, fluorine free. - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) -Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.
$24.00 - $26.25 $32.00 - $35.00 25% Off
The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. Thunderbolt utilizes hydrophobic ceramic nano-spheres. When these spheres make it to the surface of your ski the high surface area provides more water repelling power where you need it most. Not only does this new additive repel water, its super strong structure provides superior abrasion resistance. Making snow conditions less of a factor in your quest for speed! Thunderbolt is the non-Fluorocarbon replacement for the HSLF line of Fast Wax, waxes. Use when humidity is greater than 30%. Engineered for durability and speed as well as base protection with dirt repelling properties. Thunderbolt 0 • Peak Range -30° to 8° F • Iron Temperature 284° F Thunderbolt 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt 20 • Peak Range 12° to 28° F • Iron Temperature 275° F Thunderbolt 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt 40 • Peak Range 30° to 50° F • Iron Temperature 257° F
$28.95 - $54.95
A hard but hydrophobic formula from the Italian race wax wizards. Gaining popularity as a go to base coat and hardener. Excellent for ski marathons with wide range performance in cold starts and warm afternoons. Fluoro-free, hydrocarbon-based wax specifically created to last a long time in any snow condition and humidity while maintaining a stable performance over the course of kilometers and time. It can be used alone or as a base for liquids and top finishes. Requires a high iron temperature of 155C Compliant with the new EUROPEAN STANDARDS ON CHEMISTRY in force from 4/7/2020
$30.00
Performance racing paste wax for all snow types and conditions, fluoro free
$31.00
SG GREEN (-13F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow. Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG PURPLE (18F to 28F): A great basic glider for training and racing when humidity is <55%. SG red (27F to 45F): A great basic glider for training and racing when humidity is <55%.
$33.00
Toko X Cold Powder Additive is a very hard glide wax powder applied as a hardener and topcoat for superior glide in cold and abrasive conditions. Easy to apply- - simply sprinkle liberally on top of ironed-in layers of the wax of the day you and iron in. Also known as Nordlite Powder.
$35.00 - $85.00
Designed as a base prep for durability over long distances in cold, dry, abrasive snow conditions. Temp range: -5/-20°C or -4F/23F
$35.88 $47.50 24% Off
Fast Wax - Training Wax 500gm Base Prep
$39.60 $44.00 10% Off
The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).
$43.88 $68.25 36% Off
RG22 Blue -2…-8°C For all snow types. Developed for mild to medium frosts, the RG22 is our all time fastest fluor free wax! As a block it is hard, but still easy to melt. Developed especially as an underlayer for top coatings, but works extremely well also as a final layer. Scrape while still warm, let cool down and brush. Melting point: ~135°C RG32 Green -8…-20°C For all snow types. A hard and very durable glider for cold conditions. Due to its hardness it is very durable and abrasion resistant. A fluor-free version of HF31 block, that has been upgraded with N-Kinetic level 2 additives. Scrape when still warm, let cool down and brush. Melting point: ~140°C RG12 Yellow. +2…-2°C For all snow types. The softest wax on RG-series. Compared to traditional warm condition gliders the RG12 is relatively hard and not so oily wax. Melting point: ~130°C RG22 Graphite - New Snow Engineered especially for new snow and contains a precisely defined amount of graphite. Hardness is positioned between RG12 Yellow and RG22 Blue. Melting point: ~130°C.
$45.00
Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 28G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]
$48.00
All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Race Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Race Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Race Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Race Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)
$50.00
PFC Performance Hot wax for racing and practice sessions in all disciplines. Has a bonding agent for Top Finish products. Good sliding properties, durable and can be used as a base layer in races. This is the exact same product that is used and available at the World Cup and Olympic Games. The wax case is resealable. Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.
$52.00
Fluoro Free The newest test waxes from Star. High-end World Cup Performance.
$52.50 $70.00 25% Off
The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. The Thunderbolt Plus is a blend of paraffin wax and two non-Fluorocarbon speed additives. It is a non-Fluorocarbon replacement for the HSF line of Fast Wax. Use when humidity is greater than 50%. The second additive when combined with Thunderbolt gives this wax increased durability and glide. Thunderbolt Plus 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt Plus 20 • Peak Range 12° to 28° F • Iron Temperature 284° F Thunderbolt Plus 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt Plus 40 • Peak Range 30° to 50° F • Iron Temperature 257° F
Page 1 of 2 Next page