Block Gliders

PFC Free High performance racing hot wax to meet the highest demands. This is the same exact wax used at World Cup and Olympic events. Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F Universal: 3/32F, air temp. 3/36F Warm: 25/32F, air temp. 25/50 -Optimal sliding properties -Unmatched durability -Best bonding agent for Top Finish products -Resealable wax case

Designed as a base prep for durability over long distances in cold, dry, abrasive snow conditions. Temp range: -5/-20°C or -4F/23F

Kit containing a T18 Iron and one each of World Cup High Performance Hot Wax 120g Warm, Universal, and Cold

SG GREEN (-13F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow. Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG PURPLE (18F to 28F): A great basic glider for training and racing when humidity is <55%. SG red (27F to 45F): A great basic glider for training and racing when humidity is <55%.

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

Durable glide wax for long distances and for race ski base preparation. Use as a base layer when waxing for races or as a training wax. Durable, easy to apply. Maintains ski base in new ski preparation and after stone grinding. Contains Rex Power Polymers with latest N-Kinetic™ additives. Think of it as a the LF Blue of post-fluor era, the service, training and calibration wax for racers and ski teams.

For all snow conditions and temperatures Good sliding properties in all snow conditions Prevents the base from drying out Biodegradable Without the addition of fluorine Protects against dirt accumulation and oxidisation during storage Resealable wax case Snow temperature 0 °C — -30 °C Air temperature 10 °C — -30 °C Volume 120 g

Traditional burn-in pine tar for your old woodies. A great air freshener for the Nordic skier in your life! 4oz Flip top cap.

Blue 600g Ultra Glide (14F to 30F) New Moon all-time best seller! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. super reliable choice for base waxing and training. Violet 600g Ultra Glide (23F to 32F) Popular glide wax in the 20s to mid=30s, especially on humid snow. Highly durable like its companion, Rex Blue.

Contains 120g Base Performance Yellow, Red, and Blue, an Express Runer, a 3mm Plexiscraper, a Nylon Brush, a Red (fine) DMT Diamond Stone, and an Edge Grinding Rubber all in a nice kit bag!

Fast Wax - Training Wax 80gm Base Prep

SG 10 GREEN (-22F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow.Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG 8 BLUE ( 10F to 20): A great basic glider for training and racing when humidity is <55%. SG 6 PURPLE (20F to 27F): A great basic glider for training and racing when humidity is <55%.

PURE PRO fluoro-free glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellence performance and good durability to the products in all weather conditions. Especially in natural snow. The PURE PRO POLAR Powder wax is Vauhti's best base for very cold natural snow. It is usually used as a base under a liquid or block (wool applied) top coats. -Temperature ranges of -13/23F (-5C/-25C). -Comes in a 35g container with a perforated lid for easy sprinkling. -Melts like a paraffin wax, unlike the bad-old fluoro powders, thus is used more of like a base wax, but is also used as a top coat in some situations

Fluoro Free The newest test waxes from Star. High-end World Cup Performance.

Kit contains 120g Base Performance Yellow, Red, and Blue, a 3mm Plexiscraper, a Nylon Brush, a Red (fine) DMT diamond file, and a edge grinding rubber all in a nice case.

Toko X Cold Powder Additive is a very hard glide wax powder applied as a hardener and topcoat for superior glide in cold and abrasive conditions. Easy to apply- - simply sprinkle liberally on top of ironed-in layers of the wax of the day you and iron in. Also known as Nordlite Powder.

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions