Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Block Gliders

$24.00 - $26.25 $32.00 - $35.00 25% Off
The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. Thunderbolt utilizes hydrophobic ceramic nano-spheres. When these spheres make it to the surface of your ski the high surface area provides more water repelling power where you need it most. Not only does this new additive repel water, its super strong structure provides superior abrasion resistance. Making snow conditions less of a factor in your quest for speed! Thunderbolt is the non-Fluorocarbon replacement for the HSLF line of Fast Wax, waxes. Use when humidity is greater than 30%. Engineered for durability and speed as well as base protection with dirt repelling properties. Thunderbolt 0 • Peak Range -30° to 8° F • Iron Temperature 284° F Thunderbolt 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt 20 • Peak Range 12° to 28° F • Iron Temperature 275° F Thunderbolt 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt 40 • Peak Range 30° to 50° F • Iron Temperature 257° F
$11.88 - $12.88 $15.00 - $16.99 Up to 24% Off
White 80gm HS-0 (Below 8F): Extremely hard, cold weather wax best suited for fresh or wind-blown snow near or below zero. Apply with caution as a very hot iron is needed. Popular with many racing teams in the upper Midwest for mid-winter races. Teal 80gm HS-10 (-5F-15F) "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Applies easier than extreme white. Comparable to Swix CH5X. Also available in 500g bulk bars. Blue 80gm HS-20 (12F-28F) Fast Wax Blue is one of our more popular choices. Makes a good "universal" glider for waxers looking for a simple set-up Comparable to Swix CH6X. Also available in 500g bulk bars. Red 80gm HS-30 (22F-32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. 500g bar available for high-volume waxers. Yellow 80gm HS-40 (30F-50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.
$52.50 $70.00 25% Off
The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. The Thunderbolt Plus is a blend of paraffin wax and two non-Fluorocarbon speed additives. It is a non-Fluorocarbon replacement for the HSF line of Fast Wax. Use when humidity is greater than 50%. The second additive when combined with Thunderbolt gives this wax increased durability and glide. Thunderbolt Plus 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt Plus 20 • Peak Range 12° to 28° F • Iron Temperature 284° F Thunderbolt Plus 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt Plus 40 • Peak Range 30° to 50° F • Iron Temperature 257° F
$13.88 $17.50 21% Off
Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?
$13.88 $17.50 21% Off
With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold
$11.88 $15.00 21% Off
• Soy wax blend with plant-based Fluorocarbon alternatives • 25 grams of paste wax • Applicator included • Temperature Range 28F-40F • 7-10 K durability • Smells like cinnamon
$35.88 $47.50 24% Off
Fast Wax - Training Wax 500gm Base Prep
Page 1 of 1