Block Gliders

Self adhesive felt pad for buffing Slick Pro Paste Wax. Attach to any cork or wood block. 2 pack.

White 80gm HS-0 (Below 8F): Extremely hard, cold weather wax best suited for fresh or wind-blown snow near or below zero. Apply with caution as a very hot iron is needed. Popular with many racing teams in the upper Midwest for mid-winter races. Teal 80gm HS-10 (-5F-15F) "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Applies easier than extreme white. Comparable to Swix CH5X. Also available in 500g bulk bars. Blue 80gm HS-20 (12F-28F) Fast Wax Blue is one of our more popular choices. Makes a good "universal" glider for waxers looking for a simple set-up Comparable to Swix CH6X. Also available in 500g bulk bars. Red 80gm HS-30 (22F-32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. 500g bar available for high-volume waxers. Yellow 80gm HS-40 (30F-50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.

Traditional burn-in pine tar for your old woodies. A great air freshener for the Nordic skier in your life! 4oz Flip top cap.

• Soy wax blend with plant-based Fluorocarbon alternatives • 25 grams of paste wax • Applicator included • Temperature Range 28F-40F • 7-10 K durability • Smells like cinnamon

With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold

Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?

White 80g HSLF-0 (below 8F) Cold weather training and racing wax. Fluoro cold waxes have improved dramatically over the last few years and are now trusted throughout the racing community. Use caution when applying as a very hot iron is required. Teal 80g HSLF-10 (-5F to 15F) Training and racing wax for single digit teen temps. Consider HSF Green for better race performance and durability. Blue 80g HSLF-20 (12F to 28F) Popular training and budget racing wax. Consider HSF Tan or Salmon for better race durability and dirt resistance. Red 80g HSLF-30 (22F to 32F) Low fluoro content helps improve glide in moist snows especially near the freezing point. Racers will find better results with high-fluoro waxes like HSF-30 with its significantly higher fluoro content. Yellow 80g HSLF-40 (30F to 50F) Fluoro content improves wet snow glide over non-fluorinated waxes. Yellow is best in clean snow, otherwise consider either HSLF Red for dirtier snow or HSF Bronze for racing performance.

The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. Thunderbolt utilizes hydrophobic ceramic nano-spheres. When these spheres make it to the surface of your ski the high surface area provides more water repelling power where you need it most. Not only does this new additive repel water, its super strong structure provides superior abrasion resistance. Making snow conditions less of a factor in your quest for speed! Thunderbolt is the non-Fluorocarbon replacement for the HSLF line of Fast Wax, waxes. Use when humidity is greater than 30%. Engineered for durability and speed as well as base protection with dirt repelling properties. Thunderbolt 0 • Peak Range -30° to 8° F • Iron Temperature 284° F Thunderbolt 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt 20 • Peak Range 12° to 28° F • Iron Temperature 275° F Thunderbolt 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt 40 • Peak Range 30° to 50° F • Iron Temperature 257° F

Teal 500g HS-10 (-5F to 15F): 500g bulk bar is ideal for families, teams or skiers using large quantities of wax. "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Great wax for economically and effectively hardening ski bases for cold weather, and applies easier than extreme white. Comparable to Swix CH5X. Blue 500g HS-20 (12F to 28F): Bulk bar for high-volume waxing; high school teams take note! Fast Wax Blue is one of our more popular choices as a "universal" glider for waxers looking for a simple set-up and for hardening bases as an underway for a harder HF. Comparable to Swix CH6X. Red 500g HS-30 (22F to 32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. Yellow 500g HS-40 (30F to 50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.

The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. The Thunderbolt Plus is a blend of paraffin wax and two non-Fluorocarbon speed additives. It is a non-Fluorocarbon replacement for the HSF line of Fast Wax. Use when humidity is greater than 50%. The second additive when combined with Thunderbolt gives this wax increased durability and glide. Thunderbolt Plus 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt Plus 20 • Peak Range 12° to 28° F • Iron Temperature 284° F Thunderbolt Plus 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt Plus 40 • Peak Range 30° to 50° F • Iron Temperature 257° F

Fast Wax Fluoro Base Prep I is specifically designed to prep skis for waxing. Engineered with the elite / competitive skier in mind, it complements the Fluoro Hot Box Wax with the same excellent results, exceptionally fast skis right from the start. Iron in before waxing or hot box at 160° F to anneal and harden the bases. Fast Wax Fluoro Base Prep is a blend of our specialty micro wax, combined with hard waxes and our unique polyethylene based fluorinated compound to add speed and durability to skis. Waxing with Fluoro Base Prep makes for fast durable skis.

MountainFlow offers one of the world's only high-performance, plant-based ski + snowboard waxes. PLANT-BASED: mountainFLOW wax is made from 100% plant-based ingredients. 0% PETROLEUM: Most wax is made from petroleum and anything that is applied to skis/snowboard enters directly into the environment. WICKED FAST: Performs as well as a conventional (petroleum-based) ski wax - we’ve run controlled performance tests to prove it! BIODEGRADABLE + NON-TOXIC: mountainFLOW is safe for both the user and the environment SIZE: 130 grams PRO TIPS: Use a sharp scraper. Beer helps too!

MountainFlow's race wax delivers exceptional speed and durability while also being eco-friendly and biodegradable. Made with mountainFLOW's exclusive Ceramic Nanotechnology Plant-Based + Non-Fluoro. Rigorously tested and just as fast as any non-fluoro race wax.

Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.

RG22 Blue -2…-8°C For all snow types. Developed for mild to medium frosts, the RG22 is our all time fastest fluor free wax! As a block it is hard, but still easy to melt. Developed especially as an underlayer for top coatings, but works extremely well also as a final layer. Scrape while still warm, let cool down and brush. Melting point: ~135°C RG32 Green -8…-20°C For all snow types. A hard and very durable glider for cold conditions. Due to its hardness it is very durable and abrasion resistant. A fluor-free version of HF31 block, that has been upgraded with N-Kinetic level 2 additives. Scrape when still warm, let cool down and brush. Melting point: ~140°C RG12 Yellow. +2…-2°C For all snow types. The softest wax on RG-series. Compared to traditional warm condition gliders the RG12 is relatively hard and not so oily wax. Melting point: ~130°C RG22 Graphite - New Snow Engineered especially for new snow and contains a precisely defined amount of graphite. Hardness is positioned between RG12 Yellow and RG22 Blue. Melting point: ~130°C.

For new and old snow. The softest wax on HF -series. Compared to traditional warm condition HF gliders, the HF 11 is relatively hard and not so oily wax. Easy to apply and extremely dirt repellent.

Engineered especially for new snow, containing a precisely defined amount of graphite. Hardness is positioned between HF11 Yellow and HF21 Blue. Scrape when still warm, let cool down and brush.

For all snow types. Hard and very durable HF glider for cold conditions. Due to its hardness, it is very durable and abrasion resistant even in warmer conditions.

LIMIT ONE PER CUSTOMER New from the World Cup testing rigors; beating the old HF21 in new and old snow types. Very effective both above and below the indicated temp range. Use a high-quality, high temp iron. Temp Range: 10/28F -8/-2C

Blue 600g Ultra Glide (14F to 30F) New Moon all-time best seller! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. super reliable choice for base waxing and training. Violet 600g Ultra Glide (23F to 32F) Popular glide wax in the 20s to mid=30s, especially on humid snow. Highly durable like its companion, Rex Blue.

A hard but hydrophobic formula from the Italian race wax wizards. Gaining popularity as a go to base coat and hardener. Excellent for ski marathons with wide range performance in cold starts and warm afternoons. Fluoro-free, hydrocarbon-based wax specifically created to last a long time in any snow condition and humidity while maintaining a stable performance over the course of kilometers and time. It can be used alone or as a base for liquids and top finishes. Requires a high iron temperature of 155C Compliant with the new EUROPEAN STANDARDS ON CHEMISTRY in force from 4/7/2020

SG 10 GREEN (-22F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow.Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG 8 BLUE ( 10F to 20): A great basic glider for training and racing when humidity is <55%. SG 6 PURPLE (20F to 27F): A great basic glider for training and racing when humidity is <55%.

All new Start RG Glider series are next generation, fluoro free, technoceramic gliders. RG Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)

SG GREEN (-13F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow. Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG PURPLE (18F to 28F): A great basic glider for training and racing when humidity is <55%. SG red (27F to 45F): A great basic glider for training and racing when humidity is <55%.

All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Race Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Race Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Race Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Race Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)

All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Ultra Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F)

Designed as a base prep for durability over long distances in cold, dry, abrasive snow conditions. Temp range: -5/-20°C or -4F/23F

Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 28G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 100G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -.4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.