Skip to main content

Pay in 4! Select Klarna at checkout, we will contact you with instructions. Learn More>>

Filter By:

Performance

START RG Ultra Liquid Gliders
$100.00
Our all new Start RG Ultra Racing Glider series are next generation, fluor free, technoceramic gliders. High Concentrate. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally, graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml
Swix Ts Liquid Fluoro Free Wax
$80.00
Swix Top Speed waxes offer the ultimate in fluoro-free glide and durability. A proprietary mix of non-toxic additives make these waxes a viable replacement to fluorocarbon race waxes. Swix TS6 Liquid spray-on racing wax developed for use in colder conditions. This product works best when humidity is high. Can be used alone or as a topcoat. TS6L LIQUID BLUE -4ºC to -12ºC (25ºF to 10ºF) Cold condition liquid wax. Fluoro Free. 125ml/4.2 fl.oz. Swix TS7 Liquid is a spray-on racing wax developed for use in colder conditions. This product works well in high or low humidity. Can be used alone or as a topcoat. TS7L LIQUID VIOLET -2ºC to -8ºC (28ºF to 18ºF) Liquid wax for use below freezing point. Fluoro Free. 125ml/4.2 fl.oz. Swix TS8 Liquid is a spray-on racing wax developed for use in colder conditions. The wide temperature range makes it very versatile. Can be used alone or as a topcoat. TS8L LIQUID RED -4ºC to 4ºC (25ºF to 39ºF) Straddles the freezing point. Fluoro Free. 125ml/4.2 fl.oz. Swix TS10 Liquid is a spray-on racing wax developed for use in colder conditions. A great wax for wet, transformed snow, especially when snowpack is contaminated as the liquid tends to pick up less dirt than paraffin-based waxes. Can be used alone or as a topcoat. TS10L LIQUID YELLOW 2ºC to 10ºC (36ºF to 50ºF) For wet, transformed snow. Fluoro Free. 125ml/4.2 fl.oz.
Swix X Low Fluorocarbon 180gm
$70.00
The XLF series of waxes can be used as training waxes, as racing waxes with Cera F as a final layer or alone as a race wax at very low temperatures. (Also available in 60 gm bars) LF4X: Temperature range: -25F to 10F, Recommended iron temp: 155C (311F).Ski bases melt at 150C so apply this wax with a good iron, move quickly and don't linger on the base. A cold wax for dry friction conditions. It performs very well on artificial snow and has a great durability. LF4X can be used alone as a race wax when the air humidity is low. In the warmer part of the temperature range, and when air humidity is high, a top coat of Cera F FC04X will increase the performance. LF5X: Temperature range: 7F to 18F, Recommended iron temp: 150C (311F). LF5X is easier to apply than LF4X. It provides outstanding glide properties within its temperature range, and has a great durability. LF0X can be used as a race wax alone, but is often used as a base for Cera F FC05X . LF6X: Temperature range: 14F to 23F, Recommended iron temp: 145C (293F). This wax is very versatile. Its area of use stretches from a base for Cera F to racing wax and base prep wax for cold skis. LF6X has a good durability and offers great performance on artificial snow. When used as a base for Cera F, we recommend the new Cera F FC06X powder . LF7X: Temperature range: 18F to 28F, Recommended iron temp: 140C (284F). Performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. When used as a base for Cera F, we recommend the new Cera F FC07X powder . LF8X: Temperature range from 25F to 39F, Recommended iron temp: 130C (266F). A great wax for both base prep and training. It can also be used as a race wax, preferably with Cera F FC08X on top. Easy to melt and very convenient to work with. LF10X: Temperature range: 32F to 50F, Recommended iron temp: 120C (248F). A bit harder than the old LF10, LF10X is more durable. It's a good wax for base prep wax as well as a great training wax. For racing we recommend to go with high fluoro wax in this temperature area, but with the Cera F FC10X powder on top LF10X can be used with a good result.
Rex 200gm LF Glide Wax
$60.00
LF Glide Wax Green (-4F to 18F) A hard and non-oily wax for the coldest temperatures. LF Glide Wax Blue (15F to 28F) LF Blue is the fluorinated version of the legendary Rex Blue. Works well both on new and old snow. The "official benchmark wax" for the Rex Service and Product Development teams. LF Glide Wax Yellow (28F to 36F) Hard for a yellow wax, but still easy to apply. A little bit softer than HF11 Yellow.
START RG Liquid Gliders
$48.00
The all new Start RG Racing Glider series are next generation, fluor free, technoceramic gliders. Medium concentrate. Advanced mixtures of numerous ceramic compounds influence the nanostructure of the gliding surface to reduce both wet and dry friction with new levels of durability. Additionally, graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml LIQUID MOLYBDENUM 5°...-15°C (41°...5°F) 55...100% 80ml GRAPHITE 55...100% 80ml UNIVERSAL BASE
START ULTRA Gel Fluoro Glider
$40.00
Start Ultra Gel Fluor (and Gel Flour Cold) is a totally new kind of glide wax. With WBC design it provides better glide as usual wax. The way to apply Start Ultra Gel onto the base and the structure of the gel provide longer lasting glide. Start Ultra gel is HC-solvent free and prevents ski base drying. 5°...-10°C (41°...14°F) 75...100% 50ml Start Ultra Gel Fluor Cold -5°...-20°C (23°...-4°F) 75...100% 50ml
Swix HS Fluoro-Free Wax System 60g
$40.00
The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).
Fast Wax Low Fluoro HSLF 80g
$27.00 - $30.00
White 80g HSLF-0 (below 8F) Cold weather training and racing wax. Fluoro cold waxes have improved dramatically over the last few years and are now trusted throughout the racing community. Use caution when applying as a very hot iron is required. Teal 80g HSLF-10 (-5F to 15F) Training and racing wax for single digit teen temps. Consider HSF Green for better race performance and durability. Blue 80g HSLF-20 (12F to 28F) Popular training and budget racing wax. Consider HSF Tan or Salmon for better race durability and dirt resistance. Red 80g HSLF-30 (22F to 32F) Low fluoro content helps improve glide in moist snows especially near the freezing point. Racers will find better results with high-fluoro waxes like HSF-30 with its significantly higher fluoro content. Yellow 80g HSLF-40 (30F to 50F) Fluoro content improves wet snow glide over non-fluorinated waxes. Yellow is best in clean snow, otherwise consider either HSLF Red for dirtier snow or HSF Bronze for racing performance.
Rex 86g LF Glide Wax
$30.00
Blue 86g LF Glide Wax (15F to 28F) A great all-rounder like all Rex blue paraffins. The standard that all others are judged against. Pink 86g LF Glide Wax (5F to 41F) Famous for speed and durability in old, transformed or man-made snow. Great for ice.
Swix HS Fluoro-Free Liquid Wax System 125ML
$30.00
The HS series are great gliders for training and competition with very good glide properties. HS6 LIQ. BLUE, 10º/24.8F 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. Especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. Replaces CH6XL. HS7 LIQ. VIOLET, 19ºF/28F°, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. Replaces the CH7XL. HS8 LIQ. RED, 24.8ºF/39.2ºF 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. Replaces the CH8XL HS10 LIQ. YELLOW, 35.6ºF/50°F, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as HS10L collect less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. Replaces the CH10XL DANGER H-sentence number: H222, H229, H319, H336 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.
Swix X Low Fluorocarbon 60g
$26.00
The XLF series of waxes can be used as training waxes, as racing waxes with Cera F as a final layer or alone as a race wax at very low temperatures. (Also available in 180gm bars) LF4X: Temperature range: -25F-10F, Recommended iron temp: 155C (311F).Ski bases melt at 150C so apply this wax with a good iron and move quickly. Don't linger on the base! A cold wax for dry friction conditions. It performs very well on artificial snow and has a great durability. LF4X can be used alone as a race wax when the air humidity is low. In the warmer part of the temperature range, and when air humidity is high, a top coat of Cera F FC04X will increase the performance. LF5X: Temperature range: 7F to 18F, Recommended iron temp: 150C (311F). LF5X is easier to apply than LF4X. It provides outstanding glide properties within its temperature range, and has a great durability. LF0X can be used as a race wax alone, but is often used as a base for Cera F FC05X . LF6X: Temperature range: 14F to 23F, Recommended iron temp: 145C (293F). This wax is very versatile. Its area of use stretches from a base for Cera F to racing wax and base prep wax for cold skis. LF6X has a good durability and offers great performance on artificial snow. When used as a base for Cera F, we recommend the new Cera F FC06X powder . LF7X: Temperature range: 18F to 28F, Recommended iron temp: 140C (284F). Performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. When used as a base for Cera F, we recommend the new Cera F FC07X powder . LF8X: Temperature range from 25F to 39F, Recommended iron temp: 130C (266F). A great wax for both base prep and training. It can also be used as a race wax, preferably with Cera F FC08X on top. Easy to melt and very convenient to work with. LF10X: Temperature range: 32F to 50F, Recommended iron temp: 120C (248F). A bit harder than the old LF10, LF10X is more durable. It's a good wax for base prep wax as well as a great training wax. For racing we recommend to go with high fluoro wax in this temperature area, but with the Cera F FC10X powder on top LF10X can be used with a good result.
START LFXT Fluoro Gel Wax - 80ml
$25.00
Perfect step up for athletes who want uncompromising results. LFXT delivers better and long-lasting glide with an environmentally friendly profile. LFXT Blue - 10/21F LFXT Purple - 18/28F LFXT Red - 27/45F
Toko Performance Hot Wax 40gm
$22.00
Performance Hot wax for racing and practice sessions in all disciplines. Bonding agent for Top Finish products. Good sliding properties. Durable Also used in racing as a base layer Resealable wax case This is the exact same product that is used and available at the World Cup and Olympic Games. Snow temperature recommendations Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.
START Low Fluoro Glide Wax 60gm
$20.00
Start low fluorinated gliders are suitable for all snow conditions, when humidity < 55%, or as a base glider for high fluorinated gliders. LF10 GREEN (-22F to 18F) The ever-popular Start Green with fluoro additives to help resist dirt and improve glide in ultra cold but higher humidity conditions. .Caution! Start LF Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. LF8 BLUE (10F to 19F)
Swix F4 Liquid Wax 100ml
$17.00
More sliding & less sticking! Simply wipe on the entire length of your waxless ski for better glide, less sticking and more fun. Containers stow easily. Don't leave home without 'em! Fluoro-free.
Swix PS Fluoro-Free Wax System 60g
$15.00
The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -.4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.
Swix PS Polar
$15.00
A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).
Page 1 of 1