Tires/Tubes

Martello hammers home the performance you expect, on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? The Martello features a World Championship proven TNT bead, add the proprietary 4C Graphene compound, topped off with a moto-inspired tread design and progressive width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers.

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The muddiest DH course conditions possible have inspired the Mota DH tire. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world class grip across the most slick surfaces. The Mota tread features the same progressive width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tires possible, the Mota is your answer. - For the muddiest Enduro courses - With enough room, muck and debris can be shed right away - Available with TNT bead technology, a proven winner in world championships - While maintaining speed and grip, the progressive sipe-width pattern on the knob surface gives tactile grip

Unstoppable on ups. Relentless on descents Syerra has been developed to satisfy the needs of the emerging Down Country segment, raising the limit of what a XC tire can do. Vittoria engineers combined in a single product Speed and Rolling Performance – typical features of the XC segment – together with High Grip and Resistance – traits of the Trail Segment. The result is a light and fast product which allow to have fun also when tackling burlier descents and gnarlier terrain. - High durability and maximum speed thanks to Graphene and 4 different kind of compounds - Outstanding grip performance: tread design engineered for multiple conditions - Safety and sidewall protection ensured by the Anti-Pinch Flat (APF) sidewall insert

Enduro inspired performance meets XC efficiency – for your e-bike! By borrowing the best traits from the popular Martello, Barzo, and Gato models, the e-Agarro utilizes proven technologies from both the Enduro and XC categories. This combination of performance is ideal for the Trail category, as it provides predictable grip and efficiency in a mix of conditions.

e-Martello hammers home the performance you expect, while extending your ride. Looking for the one tire to tackle a wide range of courses? This is the ticket. e-Martello features a 4C Graphene compound combined with a moto-inspired tread design and progressive width siping. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, e-Martello delivers.

RideArmor delivers dependable durability and long wear-life, with a focus on comfort and grip across all asphalt and weather conditions. True to its name, RideArmor has been developed to be an all-season tire suitable for year-round training and commuting on any road surface and in any weather condition. The outcome is a genuine armor designed to protect you from your most hateful enemy: punctures. - The toughest road tire available, for the harshest road conditions - Graphene + Silica 2C Compound: Rubber, evolved with graphene and reinforced with silica in a graduated schedule of four compounds. Minimized rolling resistance and punchy responsiveness in the center strip, high grip and anchoring stability on the shoulders, and reinforcement against sidewall cuts - 100 TPI Nylon Casing provides durability, longevity, and reliability. A puncture-resistant platform engineered for racing and long training miles alike, with thicker threads that better withstand the grind of daily intervals while still transitioning to the speed of the weekly crit series - Not approved for use with hookless rims

The Martello Race tire has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. The design provides performance you expect on the most demanding and wide range of Enduro and DH courses. Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive width siping. - Progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect - The insert below the tread provides additional puncture protection - Progressive sipe-width pattern provides tactile grip at the knob surface, without sacrificing speed or grip - Moto-block square knobs offers stability and durability - Whether shredding rocks, roots, or mixed terrain, Martello delivers

The Mazza Race has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. Deep siping allows the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. - Generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process, allowing the surface of the tread to remain tacky, while the base remains planted - Wach effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life - Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning - Cornering is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, without instability - New Enduro Race Casing with insert below the tread provides additional puncture protection

The XCO World Champion tire Riding technical XC? The Barzo is the choice of the 2015 World Champion, as well as the winner of the BC Bike Race. How can such an aggressive XC tire roll so fast? The magic starts in the center tread, where we place an alternating ridge design, and progressive sipe angles. Cornering duties are handled by the moto-style block knobs, laid out in a proven V-formation. The result is a tire that corners as fast as it rolls, while still offering the protection of a full depth tread. Rocks and roots? Check. World Championship? Check.

The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob finds traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal is no exception.

A versatile all-round tire for a combination of terrain that features a unique low-profile tread that is tightly spaced in the center, for low rolling resistance and durability. Countless effective edges work together to grip on a variety of terrain, while directional siping on each knob make traction in the roots and rocks. Using the proprietary Graphene enhanced 4-compound rubber, the Mezcal balances; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance - A multitude of effective braking and climbing edges - Low-profile, densely spaced knob configuration - Designed for all terrain types, from hard pack to mud to wet

The A Dugast Pipisquallo tire was designed for dependability ?in fine loose conditions. The tread is great for fast wet courses. It has a profile with extra high studs for extremely good grip. Thanks to the design of the profile, it has a good loosening effect on the mud. Despite the open structure of the profile, the tread has a low rolling resistance. - Cotton casing with 240 TPI count offers excellent puncture resistance, elasticity, rolling resistance and handling in corners - Neoprene is a 0.1 mm-thick protection silica coating applied to the casing to extend the lifetime by preventing the tire casing to absorb humidity and mud - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction and Hookless compatible - Approved for use with hookless rims

The A Dugast Pipistrello is a top performing tire for deep sand or extremely fast hardpack surfaces. The open diamonds allow you to maintain a good grip on both a sand and a grassy surfaces. The two lines (radius control) on the side ensure that the tube has a cutting effect on sandy surfaces. - Cotton casing with 240 TPI count offers excellent puncture resistance, elasticity, rolling resistance and handling in corners - Neoprene is a 0.1 mm-thick protection silica coating applied to the casing to extend the lifetime by preventing the tire casing to absorb humidity and mud - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction and Hookless compatible - Approved for use with hookless rims

The A Dugast Rhino tire provides the highest performance ?for mud courses. The tread is designed for mud courses with extremely high knobs that provide excellent grip. The open design allows for immediate shedding of mud and debris and lower rolling resistance. Cotton casing with 240 TPI count offers excellent puncture resistance, elasticity, rolling resistance and handling in corners - Neoprene is a 0.1 mm-thick protection silica coating applied to the casing to extend the lifetime by preventing the tire casing to absorb humidity and mud - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction and Hookless compatible - Approved for use with hookless rims

The A Dugast Typhoon tire provides the best performance in mixed to loose conditions and all-purpose competitions. Thanks to the integrated radius control on the side of the tire, the tire carves through unpaved bends. The specially designed tread provides excellent grip under all circumstances. - Cotton casing with 240 TPI count offers excellent puncture resistance, elasticity, rolling resistance and handling in corners - Neoprene is a 0.1 mm-thick protection silica coating applied to the casing to extend the lifetime by preventing the tire casing to absorb humidity and mud - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction and Hookless compatible - Approved for use with hookless rims

The Mezcal XC Race is built using a new XC Race Formulation and has been torture tested at the UCI elite levels. The Race Formulation employs Graphene and Silica, providing increased wet grip and suppleness, and combines a 60TPI tubeless ready casing to optimize deformation. This combination has been shown to reduce rider fatigue while simultaneously increasing race-day reliability. The continuous center line maintains fast-rolling contact, and its offset extensions are siped to multiply the number of leading and trailing edges, propelling you up the trail on climbs and increasing bite while braking. The rear siping on the shoulder knobs runs parallel to the trail with variable widths and open trailing edges, so the Mezcal corners fast on hard, slippery surfaces – despite being such a fast-rolling tire. For climbing, cornering, or careening down hill, no tire cooks like the Mezcal. - Race Formulation: Graphene + Silica Compound provides speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

Mostro Enduro Race was engineered with the new Race Formulation technology; this variant features a single, soft rubber compound powered by Graphene + Silica to offer speed and grip without compromise. It is applied on a 60 TPI multi-layer casing, offering race-tuned durability and abrasion resistance. Additional puncture protection is provided by a bead-to-bead Reinforcement Layer placed in the lower part of the casing, and an anti-puncture belt in the upper part of the casing. Finally, the Sidewall Stability Insert feature protects the tire from rim strikes and provides additional sidewall support thanks to its high-tech rubber material. - Designed and engineered to deliver unparalleled speed and control on the trails - V-formation tread pattern with alternating mid and center lugs adorned with pronounced trailing edges - Unwavering stability across rocks, roots, and loose surfaces - Progressive siping and surface-stepped technology, enhances traction and cornering prowess while facilitating rapid acceleration - Unparalleled gravity riding performance when paired with the Vittoria Air-Liner Protect insert inserts - Hookless Compatible

The Peyote delivers World Cup level speed and confidence in a range of terrain thanks to its revolutionary new tread pattern. Positioned between Terreno and Mezcal, the tread features a low-profile alternating center ribbon designed to increase speed and grip. The familiar Vittoria v-formation used in the Peyote allows the tire to dig through loose terrain to find traction while evacuating debris laterally. The alternating mid-tread tapers up to capable cornering tread, providing responsive handling and a predictable feel. These traits work to boost cornering performance by placing effective edges directly opposing the path of cornering forces, regardless of lean or cornering angles. - Race Formulation: Graphene + Silica Compound provdes speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

The Corsa Pro tire is the choice of the pro peloton, now even faster and with increased wet weather grip and puncture resistance. - Graphene + Silica compound ensures speed and confidence through a range of surface conditions, for the ultimate control - Proven cotton casing material, wrapped in a revolutionary new construction process provides the foundation for the new standard in race-day performance road tires - High-density layer below tread surface for improved puncture resistance - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction

The Corsa Pro Control Tire is the choice of the pro peloton, aiming for top rough-road racing performance. - Graphene + Silica compound ensures speed and confidence on cobblestones and hardpack for grip, ultimate suppleness and comfort - Proven cotton casing material, wrapped in a revolutionary new construction process provides the foundation for the new standard in race-day performance road tires - New tread design with fishbone lateral texture for better handling feeling when cornering - High-density layer below tread surface for improved puncture resistance - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction

Designed specifically for time trial and triathlon, Corsa Pro Speed revolutionizes the racing experience of pro riders and performance-oriented amateur riders. By seamlessly tapering the tread into the sidewall, the Corsa Pro Speed construction combines the Graphene + Silica compound, ultra-supple cotton casing, and updated tread pattern, all electrically cured to minimize rolling resistance. The results of internal testing show an improvement in rolling performance of 5%, with 2% savings in weight. Whether you're a professional racer or amateur racer, the Corsa PRO Speed is designed to enhance your riding experience and achieve your best performance in Time Trial and Triathlon use. - Graphene + Silica formulation ensures optimal speed, safety and control.This technology is specifically designed for the intended TT use, maximizing speed, yet providing a very high level of grip on wet surfaces - Lightweight cotton and durable aramid, spun in a 320 TPI casing that combines the former’s intuitive, supple road feel with the latter’s puncture resistance. Small impacts are smoothed, road noise is muted, rolling resistance is reduced, and more of the tire maintains contact with the road - Not approved for use with hookless rims

The must-have kit for all tubeless tire users! The Tubeless Road Kit is the Vittoria all-in-one package for the best experience on your tubeless tires. The kit contains two Air-Liner Road inserts, one Universal Tubeless Tire Sealant bottle and the Road Tubeless Tool-kit - pliers and clips for easy tubeless tire removal. Contains two Air-Liner Road inserts, liquid sealant and pliers for easy tire removal. *DISPLAY BOX NOT INCLUDED THROUGH ONLINE SALE* Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

- 2X the puncture protection compared to standard butyl tubes - Easily mounted and a super lightweight alternative to tubeless systems - Suitable for use on rim and disc brakes - Model: Tubo MTB Orange - Tire Size: 27.5"-29" - Tire Width: 1.8"-2.5" - Valve Type: Presta (smooth) - Valve Length: 42mm - Weight: 84g.

Aim higher: at 54% lighter, 2x more puncture-resistant, and 50% smaller packed size compared to standard rubber tubes, Tubo-BMX tubes jump to new heights. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length