Skip to main content

Vauhti Pure One Race Liquid Glide Wax 80ml

Vauhti Pure One Race Liquid Glide Wax 80ml
  • Temperature: POLAR -25/-5°C ( -13/23ºF)
  • Temperature: COLD -2/-15°C (5/28ºF)
  • Temperature: LD +5°C/-10°C (14/41ºF)
  • Temperature: MID +2°C/-4°C (25/36ºF)
  • Temperature: WET +10°C/-1°C (30/50ºF)
$18.88 - $34.00
$25.00 - $34.00
Please select options Unavailable

Details

Pure Race liquid glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax processed with organic solvents gives excellent performance and good durability to the products in all weather conditions.

At its best when used on top of PURE BASE WAX. After wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush and again with a nylon brush.

POLAR: For cold, dry snow, -25/-5°C (-13/23ºF)

COLD: For cold snow conditions, -2/-20°C (-4/28º F)

LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF)

MID: For damp snow, +2°C/-4°C (25/36ºF)

WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

Instructions for quick glides:
• Shake the bottle well.
• Press the sponge against the ski base and squeeze the bottle lightly.
• Apply a thick layer by rubbing it back and forth on the gliding surfaces.
• Allow to dry for approximately 10 min.
• Brush thoroughly, using a nylon brush.

Tips to improve the durability and glide sensitivity:
Tip 1.  Rub in the dried gel with a natural cork or RotoCork.  Using a cork will significantly improve the product’s durability. Brush the ski base thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.
Tip 2.  Add Vauhti Fluorocarbon Block on ski base waxed with Quick Glide. Cork and brush thoroughly, using a nylon brush. Glide will increase significantly.

Tip 3.  Rub a layer of Vauhti Fluorocarbon Block on the base, and apply a generous amount of quick glide on top of this layer, mixing to combine the two products. Let dry completely; the longer, the better. Brush heavily, using a nylon brush. Corking with also extend durability.

Reviews