Your Search: "liquid wax"

Rode Racing Liquids come in Cold, Med and Warm. These waxes are durable and fast out of the gate. Simple to use and a sponge applicator is included for easily spreading the product. This sponge also stays saturated maximizing the use of the bottle. Non aerosol. Rode is one of the very few companies using an aluminum bottle for decreased plastic waste. For increased speed and durability use the Rode Wool Roto. All temperatures listed are snow temperatures. ****Tech Tip- Put on the night before skiing and buff with Rode Wool Roto Buffer and then brush out with nylon or horsehair aggressively the next day for increased initial speed and durability.**** Racing Liquid Cold -5C to -15C (5F to 23F). Really good in newer cold snow and at lower humidity. This wax can really fly in the right conditions. Racing Liquid Med -2C to -7C (19F to 28F). This one is a monster. If we were to recommend one liquid wax to have it would be RLM. Good in a variety of snow types and in the key temp range of the 20s This won about 70% of our fluoro free wax tests last year. We simply cannot say enough about this wax. Racing Liquid Warm -3C to 0C 26F to 32F RLW is a versatile warm solution especially when the humidity remains below 50%.

Swix Top Speed waxes offer the ultimate in fluoro-free glide and durability. A proprietary mix of non-toxic additives make these waxes a viable replacement to fluorocarbon race waxes. Swix TS6 Liquid spray-on racing wax developed for use in colder conditions. This product works best when humidity is high. Can be used alone or as a topcoat. TS6L LIQUID BLUE -4ºC to -12ºC (25ºF to 10ºF) Cold condition liquid wax. Fluoro Free. 50ml/1.7 fl. oz. Swix TS7 Liquid is a spray-on racing wax developed for use in colder conditions. This product works well in high or low humidity. Can be used alone or as a topcoat. TS7L LIQUID VIOLET -2ºC to -8ºC (28ºF to 18ºF) Liquid wax for use below freezing point. Fluoro Free. 50ml/1.7 fl. oz. Swix TS8 Liquid is a spray-on racing wax developed for use in colder conditions. The wide temperature range makes it very versatile. Can be used alone or as a topcoat. TS8L LIQUID RED -4ºC to 4ºC (25ºF to 39ºF) Straddles the freezing point. Fluoro Free. 50ml/1.7 fl. oz. Swix TS10 Liquid is a spray-on racing wax developed for use in colder conditions. A great wax for wet, transformed snow, especially when snowpack is contaminated as the liquid tends to pick up less dirt than paraffin-based waxes. Can be used alone or as a topcoat. TS10L LIQUID YELLOW 2ºC to 10ºC (36ºF to 50ºF) For wet, transformed snow. Fluoro Free. 50ml/1.7 fl. oz.

NEW PFC FREE Toko 125 ML Liquid Paraffin Wax. Where high performance meets convenience! Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: Hard liquid wax for snow temperatures -22/14 °F, air temp -22/16 °F. 0-60% relative humidity. Red: Medium hard liquid wax for snow temperatures 10/25°F, air temp 12/28 °F. 40-80% relative humidity. Yellow: Soft liquid wax for snow temperatures 21/32 °F, air temp 25/50 °F. 80-100% relative humidity. -Wide application range for common conditions in the medium snow temperature range. -Very long-lasting wax adhesion. -Can also be used as adhesion promoter for top finish products. -Fast processing. -For brushing/polishing use the Polishing Brush Liquid Paraffin

The HS series are great gliders for training and competition with very good glide properties. HS6 LIQ. BLUE, 10º/24.8F 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. Especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. Replaces CH6XL. HS7 LIQ. VIOLET, 19ºF/28F°, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. Replaces the CH7XL. HS8 LIQ. RED, 24.8ºF/39.2ºF 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. Replaces the CH8XL HS10 LIQ. YELLOW, 35.6ºF/50°F, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as HS10L collect less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. Replaces the CH10XL DANGER H-sentence number: H222, H229, H319, H336 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

The Racing eXtra Liquid (RXL) glider line is the evolution of the Racing Liquid line (RL), which had huge success when introduced in 2020. Thanks to the use of special fluor-free additives, the RXL line takes performance to a new level with increased speed and durability. The RXL line gives extra acceleration, extra water- and dirt-repellence, as well as extra abrasion resistance. It has a very wide range of use as it is suitable for all types of snow: natural or artificial, new or old. These waxes are durable and fast out of the gate. Simple to use and a sponge applicator is included for easily spreading the product. This sponge also stays saturated maximizing the use of the bottle. Non aerosol. Rode is one of the very few companies using an aluminum bottle for decreased plastic waste. For increased speed and durability use the Rode Wool Roto. 80ml bottles will do between 20-35 pairs of skis. All temperatures listed are snow temperatures. ****Tech Tip- Put on the night before skiing and buff with Rode Wool Roto Buffer and then brush out with nylon or horsehair aggressively the next day for increased initial speed and durability.**** Racing eXtra Liquid Cold -5C to -15C (5F to 23F). Really good in newer cold snow and at lower humidity. This wax can really fly in the right conditions. Racing eXtra Liquid Med -2C to -7C (19F to 28F). This one is a monster. If we were to recommend one liquid wax to have it would be RLM. Good in a variety of snow types and in the key temp range of the 20s This won about 70% of our fluoro free wax tests last year. We simply cannot say enough about this wax. Racing eXtra Liquid Warm -3C to 0C (26F to 32F) RLW is a versatile warm solution especially when the humidity remains below 50%.

Toko 100 ML Liquid Paraffin Wax - All the convenience of liquid application for training and racing. Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: for snow temperatures 18F/-22F 0-60% relative humidity. Red: for snow temperatures 28F/11F 40-80% relative humidity. Yellow: for snow temperatures 32F/25F 80-100% relative humidity.

PURE PRO liquid glide waxes are based on the ingredients used in the racing paraffin series and totally new additives, which give excellent performance and good durability to the product. PURE PRO liquid glide waxes have been developed especially for natural snow and fine-grained snow. With high-quality solvents, liquid waxes absorb effectively into the base and retain the performance of the ski base longer than hot melted paraffins. Is best when used on top of liquid base wax or traditional paraffin waxes. After the wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush and again with a nylon brush. COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) PRO WARM: For damp snow (26F - 44F) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

In the Kit: -Rex Glide Cleaner 170ml. Cleans and primes base for further waxing. Wipe on, let dry, brush lightly. -Rex G11 Race Wax 150ml spray. 28 to 50 F. For wet snow of all types. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Rex G21G Race Wax 150ml spray. 10 to 28 F. Mid-temp glider designed for fresh snow. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Rex G21 Race Wax 150ml spray. 10 to 28 F. Universal mid-temp glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Rex G41 Race Wax 150ml spray. -4 to10 F. Cold-weather specific for all snow types. Wipe on, let dry, brush lightly. Certified non-fluoro wax. *With all liquid prep and liquid waxes, apply at room temp and allow to dry completely. Brush lightly with soft nylon or horsehair brush before skiing. Stiff nylon brush will also work fine.

IMPORTANT: This product is not for skin skis. Perfect for waxless skis! Helps prevent fresh, wet snow from sticking to the ski's waxless pattern. Simple and quick to use-- just wipe on, air dry and ski in about a minute. 100ml size stores easily in a pocket. Easy to reapply on the trail for longer skis. For a higher performance option-- consider Toko TF90 Paste . TF90 requires more application time and some buffing, but offers a step up in glide and durability.

In the Kit: -Start Ultra Gel Yellow Wax 50ml wipe-on.14 to 41 F. Universal warm liquid glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Start Ultra Gel Blue Wax 50ml wipe-on. 10 to 28 F. Universal cold liquid glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Rex Glide Cleaner 170ml. Cleans and primes base for further waxing. Wipe on, let dry, brush lightly. Free New Moon Ski Ties and Bumper Sticker. Good at all temps and snow snow conditions! *With all liquid prep and liquid waxes, apply at room temp and allow to dry completely. Brush lightly with soft nylon or horsehair brush before skiing. Stiff nylon brush will also work fine.

PURE UP liquid glide waxes are intended specifically for active skiers and competitive skiers for training rounds. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellent performance and good durability to the products in all snow types and weather conditions POLAR: For cold, dry snow, -25/-5°C (-13/23ºF) COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) WARM: For damp snow, +7/-3°C | 45/27°F (100ML) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

Pure Race liquid glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax processed with organic solvents gives excellent performance and good durability to the products in all weather conditions. At its best when used on top of PURE BASE WAX. After wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush and again with a nylon brush. POLAR: For cold, dry snow, -25/-5°C (-13/23ºF) COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

Equivalent to very high fluoro race wax but without any fluorocarbon, Vauhti Pure Race Liquids are high-performance glide waxes that offer performance to meet the highest requirements of a competition-oriented skier. PURE Race Liquids have high-quality hydrocarbon, zinc stearate and silicone waxes and provide optimal performance for new and natural snow. WARM NEW SNOW For warm new snow +7 to -3°C (45 to 27°F) 80ml bottle with sponge applicator Sponge on. Brush out after curing Completely free of fluorine but equivalent to high fluoro top coats COLD For cold new snow -2 to -20°C (28 to -4°F) 80ml bottle with sponge applicator Sponge on, let dry, brush Completely free of fluorine but equivalent to high fluoro top coats LDR OLD SNOW For wide temperature range and for variable conditions (14F - 41F) LDR NEW SNOW LDR glide wax is best when the conditions are expected to change or vary over a ski course For cold snow +5 to -10°C (41 to 14°F) 80ml bottle with sponge applicator Sponge on, let dry, brush Completely free of fluorine but equivalent to high fluoro top coats OLD SNOW WARM for damp snow (26F - 44F) OLD SNOW COLD For cold snow conditions (-4F - 28F)

A Liquid kick wax line from Start to help easily apply grip wax. Use the base wax for durability and then chose you wax of the day for kick. These liquids tend to have bomber kick so 2-3 layers of wax of the day would be enough. You can also apply a layer over the top of traditional hard wax for added kick! 80ML -Blue: 5/23°F (-5/-15°C) -Purple: 21/32°F ( 0/-6°C) -Red: 30/41°F (+5/-1°C) -Base

LDR For a wide temperature range and for variable conditions +5 to -10ºC (14F - 41F) Pure Race liquid glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate, and silicon wax processed with organic solvents give excellent performance and good durability to the products in all weather conditions. Especially for old and artificial snow. Best when used on top of PURE BASE WAX. After the wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush, and again with a nylon brush.

Fluoro-Free. Rubbing on and corking out layers of hard grip waxes on your ski can be time consuming. Vauhti is making skiers lives easier with a Liquid GS Carrot grip wax. Based on the popular GS stick wax, a thin and smooth layer is easy to apply. No cork, no elbow grease, just let dry and go skiing. We do wonder about the potential oxymoron of a liquid hard wax, but we would rather go skiing than spend much time thinking about it. Carrot: Good in new or old snow conditions Temperature range of -2 to -20ºC (-4 to 28°F) Purple: Best on fine and fresh snow Temperature range of -1 to -7ºC (19 to 30°F)

More sliding & less sticking! Simply wipe on the entire length of your waxless ski for better glide, less sticking and more fun. Containers stow easily. Don't leave home without 'em! Fluoro-free.

Liquid glide waxes will always perform better if a base preparation is done with an ironed-in paraffin or the use of a liquid base primer. Liquid Pure One base wax contains high quality polyethylene waxes and totally new additives makes a hard, dirt-resistant and wear-resistant coating on the ski base.

Liquid glide waxes will always perform better if a base preparation is done with an ironed-in paraffin or the use of a liquid base primer. Use the Pure Pro Base liquid base primer on a regular basis on new and stone grinded skis and from time to time during the season to get the most benefit and wear resistance from the liquid glide waxes. Liquid base wax doesn't need to be ironed in and can be used as a base for other liquid glide waxes and paraffins

HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About liquid HS6: A liquid training and competition slide wax that can be used alone or as a base for racing products. Specifically designed for cold conditions down to -12°C. At lower temperatures than this, traditional waxes are usually better than liquid products. HS6L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. How to apply HS6L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. - Amazing universal glide wax - For training and racing - Improves ski glide - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions

Liquid paraffin wax at the performance level for racing and training. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

Rex G-series spray gliders are special fluoro-free versions of our most advanced HF gliders. They feature all the technology advantages of Rex HF-series, without the use of fluoro compounds. Approved for use in junior racing in countries where fluorinated waxes are prohibited. In low moisture and artificial snow, the performance is almost on par with HF series, with similar durability. G-series gliders are great waxes for fast training and junior racing. Likewise to our HF Sprays, they are the most wax-containing liquid gliders on the market and do not need hot waxing to support their durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. G41 – Taking a step ahead and breaking the boundaries set by hot waxing! The new G41 Spray is not limited by the requirements set by hot waxing and scraping. The Special UHW wax is only possible to apply in liquid form. Being the hardest glide wax on the market, it gives unseen performance on artificial and coarse snow, and also on cold dry snow. 435 G41 UHW Pink/Green +5…-20°C Rex G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial 439 G21G "New Snow" Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology.. Never has Rex non-fluorinated glide wax been this fast! 437 G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast! 436 G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast!

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Kit containing all of the essentials for waxing Base Performance Liquid Paraffin. Contains 1 each of Base Performance Liquid Paraffin Yellow, Red, and Blue, a Base Performance Hot Wax Blue 120g, and a Yellow Liquid Paraffin Polishing Brush all in a high quality cordura zippered bag.

NEW Fluor free version of Glide Cleaner. Cleanses the base as well as Rex Remover, but without making the base turn gray and dry. Apply generously to cloth or fiberlene, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. After treatment, Rex Glide Cleaner leaves a very hard and thin layer of Rex UHW hard wax, that acts as an excellent binder for both liquid and solid paraffin waxes. Always start a new glide waxing by cleaning with Rex Glide Cleaner. It will make the attachment and durability of sequent wax layers considerably better. Glides well even on its own on dirty and artificial snow, that is usually found in ski tunnels.

The NFX powders, containing fluorine-replacing additives, are based on the latest NF-series N-Kinetic 3 glide waxes, which have been supplemented with additives proven successful in the product development program. NFX’s performance has elevated it to the top of glide tests, and NFX powders have been used to reach the podium by several different national teams in the 23/24 season. The “X” in the product series name comes from new, innovative additives that can only be mixed into powders. This allows for a performance boost above previous solid and liquid waxes. Yellow NF11 (23F - 50F) Glide powder for wet conditions to mild frost. Mixed to old snow. Based on a NF-level micronized Rex Power Polymers wax blend, with added extra N-Kinetic™ nanoparticles that are embedded in the surrounding powder matrix. Developed especially for wet and moist snow. Snow temp: +10…-5°C / 50…23°F Snow type: mixed to old snow Melting point: 135°C Iron temp: 180°C Blue NF21 (14F - 28F) Glide powder for all snow types in mild freeze. Top of the legendary Rex Blue waxes. Based on a NF-level micronized Rex Power Polymers wax blend, with added extra N-Kinetic™ nanoparticles that are embedded in the surrounding powder matrix. The mixture is developed especially for new and mixed snow, and snow with relatively high humidity. Snow temp: -2…-10°C / 28…14°F Snow type: all snow types Melting point: 135°C Iron temp: 180°C New Snow NF21G (17F - 37F) Special glide powder for new snow conditions. Based on a NF-level micronized Rex Power Polymers New Snow wax blend, with added extra N-Kinetic™ nanoparticles that are embedded in the surrounding powder matrix. The special mixture of NFX 21g is developed especially for new and mixed snow and snow with relatively high humidity. In addition to the standard new snow additives used in NF 21g, the NFX 21g adds additional nanoparticles for extra performance boost on new snow. Snow temp: +3…-8°C / 37…17°F Snow type: new snow Melting point: 135°C Iron temp: 180°C Pink Green NF41 (-4F - 50F) Special glide powder for old, coarse and artificial snow in all temperatures. Contains Rex UHW -Ultra Hard Waxes which means it glides exceptionally well on both coarse slush and slow, squeaky snow. Based on a NF-level micronized UHW wax blend, with added extra N-Kinetic™ nanoparticles that are embedded in the surrounding powder matrix. The additive mix on this powder is especially designed to boost performance on wet and moist snow. Snow temp: +10…-20°C / 50…-4°F Snow type: old / coarse and artificial snow Melting point: 140°C Iron temp: 180°C

Start Anti Ice Glider is liquid icing prevent glider created especially for no wax skis based on nanotechnology. Anti Ice is packed in handy plastic bottle equipped with sponge to ensure easy and equal apply to the ski base. After applying let dry about five minutes and ski is ready for use. Anti Ice Glider improves gliding in no wax skis without reducing grip abilities. Treatment with silicon content liquids are not recommended by ski produces. One treatment with Anti Ice is enough for ten kilometer skiing.

Fluor Free Liquid glide wax for skin skis. With a sponge foam applicator for easy application. Also available with a felt polisher for polishing and extra durability. A liquid glide wax for skin skis For all temperatures For everyone using skin skis Excellent glide in no time

Blue NF21 (17F - 28F) All types of snow. Rex's most slippery fluoride-free wax ever! Choose either the liquid spray version or the traditional hot wax, the wax itself and the wear duration are the same. Green NF31 (-4F -18F) All types of snow. Hard and durable for cold conditions. Melting point: approx. 140°C. Black NF21G "New Snow" (10F-36F) Intended for new snow, containing a precisely optimized amount of graph- ite, NF21G complements Rex’s NF series. The wax hardess is positioned between NF11 Yellow and NF21 Blue.

60ML -Base -Gold 19F to 34F -Red 32F to 50F Same durable Klister wax as Rex’s traditional line, now in a liquid form. Allows a quick and thin application. Can be applied with minimal heating at room temps. Excellent base for hard waxes in mixed or abrasive conditions. For fully transformed conditions where a thick layer is needed use traditional tube klister.

PURE PRO fluoro-free glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellence performance and good durability to the products in all weather conditions. Especially in natural snow. The PURE PRO POLAR Powder wax is Vauhti's best base for very cold natural snow. It is usually used as a base under a liquid or block (wool applied) top coats. -Temperature ranges of -13/23F (-5C/-25C). -Comes in a 35g container with a perforated lid for easy sprinkling. -Melts like a paraffin wax, unlike the bad-old fluoro powders, thus is used more of like a base wax, but is also used as a top coat in some situations

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

Extreme durability! A great powder for extra cold conditions, that has high durability on aggressive snow and excellent dry friction properties. - Perfect on cold man-made snow - Easier to apply than corresponding cold waxes PSP is a special powder wax to add to other waxes to increase their durability, and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle the PSP powder over the wax. Even a generous amount will not affect glide. Then iron the powder into the wax layer. Allow cooling, then scrape and brush away the excess. Recommended iron temp: 150°C (302°F). Replaces the CH3X.

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 40 g 1,41 oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator and integrated polishing felt Comfortable pocket size to go and wax en route Biodegradable Also used as rust protection for ski edges

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 75 ml 2,54 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Comfortable pocket size to go and wax en route Biodegradable Also used as rust protection for ski edge

Includes 120g size Base Performance Yellow, Red, and Blue hot wax. Also includes 100ml Express Pocket liquid wax. 3mm Plexiscraper, Nylon Brush, Express Tuner Kit, T8 Iron, and a medium Diamond File are also included. Comes in a nice kit bag. A $250 value!

Gentle cleaning liquid for all types of base. Removes wax residue especially of Top Finish products and prepares the base for waxing.

Universal liquid wax for cross-country skis with mechanical climbing aid. For all kinds of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski preparation at home Biodegradable

Any Nordic skier who enjoys fast skis will appreciate this gift! Here are some of the most important and popular waxing essentials in the Nordic ski world for glide waxing with hot wax plus a new liquid wax prep twist. Perfect for waxers that already have or are planning on getting a wax profile , wax iron, and a wax iron. In this gift pack: Rex Glide Cleaner Liquid prep for base cleaning and priming for gliders. This represents the "new school" of ski waxing tech. Wipe Rex Glide Cleaner onto the base of the ski and allow to dry thoroughly. After drying, a thin wax layer is left behind as a "primer " layer for later waxes. Two legendary iron-in glide waxes - Start Green for the cold days and Rex Blue for everything else. A fresh, sharp New Moon Wax Scraper - time to retire those old, dull scrapers. Toko Groove Pin - handles grooves of all shapes and sizes: perhaps the handiest little tool at the wax bench! Now that the skis are all waxed up, protect them with some New Moon Ski Sleeves - they keep those fast bases safely separated for the drive to the trail! And for a great trail-head conversation starter, a New Moon Bumper Sticker!

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski and snowboard preparation at home Biodegradable Also used as rust protection for ski edges

A hard but hydrophobic formula from the Italian race wax wizards. Gaining popularity as a go to base coat and hardener. Excellent for ski marathons with wide range performance in cold starts and warm afternoons. Fluoro-free, hydrocarbon-based wax specifically created to last a long time in any snow condition and humidity while maintaining a stable performance over the course of kilometers and time. It can be used alone or as a base for liquids and top finishes. Requires a high iron temperature of 155C Compliant with the new EUROPEAN STANDARDS ON CHEMISTRY in force from 4/7/2020

One of the few truly universal waxes available. It is able to glide in cold temperatures and kick when the snow warms up. This wax outperforms other klisters in fresh snow conditions while simultaneously is able to kick in transformed ice crystals. In racing, this wax can be used as a mix with another klister, or under a cover wax. The versatility of this mix is in part due to its composition of klister raw materials, terva(tar), and aluminum. The aluminum additive prevents the formation of ice around freezing, when snow is in transition between solid and liquid state. The special ingredient is the terva which enables the wax to kick in warm conditions and remain fast on cold snow. The tar that is used in Uni Wide is created through the dry distillation of Finnish pine trees. What remains is a unqiue thermoplastic that transforms with changes in temperature. In a thin application, the tar hardens and creates a shell to protect from fresh ice crystals. In a thick application, the tar acts as a cusion layer to provide kick on rounded and transformed ice crystals. Application: Begin with a thin application of base klister or base klister spray. Then apply Universal Klister in a chevron pattern along the kick zone of your ski. Tech tip: apply a thin layer for fresh snow conditions, and a thicker layer for transformed snow conditions. Rub in an even layer with your thumb or synthetic cork. When racing, allow the skis to sit base down on the snow for a brief period of time to allow the hard shell to form, remove any excess snow sticking to the base and go ski.

Ski cleaner for cleaning ski bases and removing wax and klister. First remove as much wax as possible using a scraper. Dampen a piece of Fiberlene with ski cleaner and rub until the wax/dirt is dissolved. Wipe with dry Fiberlene. The active ingredient in this liquid ski cleaner is low-aromatic hydrocarbon, which has a good effect on grease and dirt. The aerosol has a long shelf life and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless.

Absorbent synthetic towel ideal for applying and spreading new-generation liquid glide waxes. 30 meter roll is perforated into approximately16"/40cm segments for convenience. Note that this is NOT a lint-free product like Swix Fiberlene and Toko Base Tex, Therefore, avoid using for kick wax or klister cleanup with Rex Fibertowel.

- Cleans and polishes painted, anodized, and plastic surfaces - Loosens dirt and grime for easy cleaning - Sprays on and wipes away quickly and easily - Carnauba wax creates a long lasting protective shine

- Designed For All Conditions - Goes On Wet And Sets Up To A Soft, Pliable Wax - Shields Chain From The Elements - Reduces Abrasive Wear And Corrosion - Waterproof - For Chain Driven Bicycles Only

Special base brush for polishing the skis after applying performance liquid paraffin wax.

The easiest way to achieve good glide for racing or training. Recommended at temperatures from -2°C to -8 degrees. - Liquid yet durable - Excellent as a topping base - Gives good glide in varied conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

SPECIAL GREEN (5F to 14F) Rode Special Green hard wax (grip wax) for 5F to 14 F. If you're looking for fast, this is it. Can mix this with Green to soften it up and when just a bit more kick might be nice. GREEN (14F to 25F) Rode Green hard wax (grip wax) for 14F to 25 F. Best for low humidities in new and untransformed snow. MULTIGRADE BLUE (20 to 28F) Rode Multigrade Blue hard wax (grip wax) for 20F to 28F. Best in new and untransformed snow. AWESOME wax for SPEED in the teens! BLUE (21F to 28F) Rode Blue hard wax (kick wax) for snow temps 28F to 21F. Very reliable grip in new and untransformed snow within its temperature range. SUPER BLUE (27F to 30F) Rode Super Blue hard wax (grip wax) for snow temps 27F to 30F. Excellent in new and untransformed snow. If you don't have this one, GET IT! MUST HAVE! SUPER EXTRA BLUE (23F to 30F) Rode Super Extra Blue hard wax (grip wax) for fresh and untransformed snow. Snow temps 23 to 30 F. Use when humidity is above 40% as a complement to Super Blue which is used for lower humidity. MULTIGRADE VIOLET (29F to 32F) Rode Multigrade Violet hard wax (grip wax) for 29 to 32 F. Can be used much colder in higher humidity and moisture content. If you have one wax in your pocket, pray it's this one! This is the gateway drug of Rode waxes...you try this one and then HAVE TO HAVE the rest of the line! VIOLET (around 32F) Rode Violet hard wax (grip wax) for 32 F (0 C). Don't leave home without this wax! Thinking about zeroes? Everything else super slow? Try this before you make the final call. VIOLET EXTRA (32F to 34F) Rode Violet Extra hard wax (grip wax) for 32 to 34 F. Another one to try when you're searching for something other than waxless skis! RED EXTRA (30F to 34F) Rode Red Extra hard wax for 30 to 34 F, which can be great new humid snow that isn't glazing or drying out. RED (32F to 36F) Rode Red hard wax (grip wax) for 32 to 36 F. Can be good in fresh, humid snow that isn't glazing. YELLOW (34F to 39F) Rode Yellow Gialla hard wax (grip wax) for 34 to 39 F. Gialla is THE wax to try in the Rode line when trying to decide on wax for zeroes. Think 2016 Birkie...when the snow is wet and glazing... this could be your miracle wax! SUPER WEISS Temp Range: (25F-30F) -1°...-4°C / -3°...-7°C For old non-transformed snow or not too compact.

Protective shell for wax iron. Protects the wax iron during transport. Heat resistant bottom area for a quick stowage of the still warm wax iron. Fits all current ski wax irons.

The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).

The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -.4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.

Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?

Fast Wax Horse Hair Wax Brush is optimized for bristle length and density, very efficient at removing wax from the ski structure.

Fast Wax - Training Wax 80gm Base Prep

Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax

Rex's well-known and trusted basic grip wax line contains some classics, which have been in production for over 50 years! Universal Tar: -1/-25°C (-13/30°F) Excellent wax for skiers who are looking for simplicity in their waxing, as well as for racing skiers. Despite it’s "Universal" name it's a fully proven race wax, especially at mild frosts 18/30°F (-1/-8°C). Light Green: -8/-15°C (5/18°F) The most popular Rex wax for cold conditions. On new snow provides a good grip at around -6°C. Use it in race waxing as a coating for softer waxes. Blue: -2/-8°C (18/28°F) The king of grip waxes! A classic that has been in production for decades, still remaining relevant. In Finland Rex Blue has gained a legendary reputation, just ask any finnish skier! It is used widely as a universal grip wax on cold temperatures. Its grip and glide properties can be adjusted by the thickness of the wax layer. The colder the weather, the thinner the layer. Blue Special: -1/-4°C (25/34°F) Another Rex-legend. A bit softer and more gripping than Blue (115) for milder frosts. Provides a good grip even on hard and worn track. Purple: 0/-2°C (28/32°F) Despite of its purple color, this is a pure below-zero-temperature wax, which is used in race waxing as a coating for PowerGrip Green. A secure choice for recreational skiers. Red: +1/-1°C (30/34°F) Red kick wax for zero conditions. When mixed or used as a coating for klisters, gives great protection against icing on new or loose snow. Base Wax:? Very sticky and durable base wax under any grip wax. The most durable result is achieved by applying a wax with an waxing iron to roughened ski base.

With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold

Developed for coating grip waxes. Extremely fine grain polymer wax. Reduces the kinetic friction of grip waxes and prevents icing. Suitable for klister and kick wax coating. Sprinkle on top of grip wax or klister Spread lightly with finger