Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Your Search: "roller skis"

$439.00
The V2 Aero roller skis are the most versatile roller skis available. The large diameter pneumatic wheels can be used on surfaces where it’s impossible to roller ski with smaller diameter, solid wheels. The V2 Aero roller skis are renowned for their versatility. The skis can be used on dirt roads, limestone bicycle paths, chip seal pavement and on grass. On normal pavement the pneumatic tires provide an extremely smooth ride. Many users consider the Aero to be the safest skis available as they will roll over debris that can stop smaller wheels. Another major benefit is that the Speed Reducers on pneumatic tires are much more effective than when used on solid rubber wheels. Because the Speed Reducers are so effective on the Aero the skis have become popular in very hilly or mountainous terrain.The original Aero with the 150mm pneumatic wheels can cover terrain impossible with any other roller ski. The large 150mm pneumatic wheels easily roll over road debris and provide a very smooth ride. Despite the large wheel size, the XL150S is very light at only 2000g per pair, which is why so many say the XL150S is their top choice in roller skis. Wheelbase: 604mm/23.55” Weight per pair: 2000 g/4.57lbs Ground Clearance:31mm/1.2” Wheel Diameter: 150mm/5.85” Wheel Width: 31mm/1.2”
$119.00
The stainless steel roller arms and machined aluminum lever make it light and strong while nylon rollers and bushings reduce noise. Dual bearings ensure solid contact with the wheels and it works well in both wet and dry conditions. The lever actuated system has one neutral and four resistance positions that is easy to engage for training or for slowing the skis when negotiating moderately steep downhills. Sold in pairs, mounts to the front of each roller ski. For steep terrain we recommend the use of a brake. For all XLA9848, XLK9848 and XLQ9848 roller skis.
$99.00
The newest version of our brake is stronger than the previous version, and allows for the cuff to ride a bit higher, to ensure that the cuff will hit the back of the skier’s leg arather than getting caught on the boot. The B150XL is designed for use on the XL150S, the XL125S , XL150SC and the XLA/XLC/XLK/XLQ9848. Also fits older XL900, XLC900, XL98 , XLC98, XL9848 and XLC9848 roller skis. Not for use on Non-XL versions of our skis (olkder models) Sold singly, mounts to the back of one roller ski.
$359.00 - $369.00
The composite forks with built in fenders are just one of the six vibration-absorbing materials in the new XLC hybrid construction. Available in four speeds. THE XLC98 The new XLC Elite roller skis are the best of everything we have learned from 30 years of building roller skis. The XLC are available in Freestyle, Classic and Combi skis. The XLC are the lightest and the most snow like solid rubber wheel roller skis we have ever produced. The vibration damping of the new composite frame is exceptional, and, coupled with the shock absorbing wheel forks, the XLC makes skiing on pavement as similar to skiing on snow as possible. In addition to lower ski weight and the improved vibration damping, another advantage of the XLC is a lower center of gravity. The clearance from the pavement to the bottom of the shaft is the same, but with the strong construction we can make the shaft thinner, so the top of the shaft is lower, making the skis more stable. Safety is high priority at Jenex, so all XLC models are available with our patented brakes and speed reducers. For skiers weighing over 90 Kg (199 pounds), we offer the XLC in a Heavy Duty (HD) version that is about 25% stiffer. COMPOSITE FIBERS: Over the last twenty years we have tested most high strength synthetic fibers, including the many variants of Carbon, S glass, E glass and Aramid. All of these fibers have strengths and weaknesses. Aramid (KevlarTM) fibers have high tensile strength, dampen vibration and are extremely abrasion resistant, but are very weak in compression. Carbon is extremely stiff and strong in both tension and compression, but breaks very easily from impact, which is why so many Carbon ski poles break in sprint and mass start races. Carbon is a great material, but to prevent impact failure Carbon fiber shafts need a core with good energy absorbing properties and perform best when combined with more impact resistant fibers. And that’s what we have with the XLC. THE CORE: The core material is the foundation of a roller ski shaft and we have tried about every material available including a variety of metal cores. We have used organic cores like Baltic birch, Italian poplar, Balsa and many synthetic cellular cores. We now know from extensive experience that for roller skis, cellular cores are superior to metal cores. The XLC uses the best core we have tested to date. However, fabricating the cellular core is time consuming and expensive compared to an extruded core. BONDING: Composite structures need a very strong bond to both the fibers and the core. Bonding high strength fibers to a metal core can be more difficult than bonding to a porous cellular core. The metal must be aggressively etched for the fibers to bond properly. The cellular core we use has thousands of microscopic pores per square centimeter, and therefore the epoxy penetrates and bonds extremely well the core. The epoxy that binds the fibers to themselves and to the core has a tensile strength about 3X greater than conventional epoxies and is the strongest commercially available. The wheel forks have much better fenders than the original 800 and 900 series skis. The combination fork and fenders are produced in Du Pont’s™ toughest thermoplastic, further strengthened with the addition of carbon fibers during the injection molding process. The non-metallic wheel forks reduce vibration, and for improved safety, all V2 Roller Skis are designed to accept the patented Jenex speed reducers and brakes. The four XLC98 models are identical except for wheel speed. The XLC98F is fast, The XLCM is medium, the XLC98MS is medium slow and the XLC98S is slow. The rolling resistance of the slow wheels is increased using our patented ISR (internal speed reducer) that weighs only 10 grams. The wheel forks, with the built-in fenders, use the same strong Du Pont™ composite material that we have employed on the V2-900 and V2-800 series for many years.
$469.00
The XLA9848 and the XLC9848 are the latest versions of the popular V2 Terra Ski. The Terra was a favorite of Olympic Champion Kristina Smigun as well as several Russian National Ski Team skiers. The new XLC Elite roller skis are the best of everything we have learned from 30 years of building roller skis. The XLC are available in Freestyle, Classic and Combi skis. The XLC are the lightest and the most snow like solid rubber wheel roller skis we have ever produced. The vibration damping of the new composite frame is exceptional, and, coupled with the shock absorbing wheel forks, the XLC makes skiing on pavement as similar to skiing on snow as possible. In addition to lower ski weight and the improved vibration damping, another advantage of the XLC is a lower center of gravity. The clearance from the pavement to the bottom of the shaft is the same, but with the strong construction we can make the shaft thinner, so the top of the shaft is lower, making the skis more stable. Safety is high priority at Jenex, so all XLC models are available with our patented brakes and speed reducers. For skiers weighing over 90 Kg (199 pounds), we offer the XLC in a Heavy Duty (HD) version that is about 25% stiffer. COMPOSITE FIBERS: Over the last twenty years we have tested most high strength synthetic fibers, including the many variants of Carbon, S glass, E glass and Aramid. All of these fibers have strengths and weaknesses. Aramid (KevlarTM) fibers have high tensile strength, dampen vibration and re extremely abrasion resistant, but are very weak in compression. Carbon is extremely stiff and strong in both tension and compression, but breaks very easily from impact, which is why so many Carbon ski poles break in sprint and mass start races. Carbon is a great material, but to prevent impact failure Carbon fiber shafts need a core with good energy absorbing properties and perform best when combined with more impact resistant fibers. And that’s what we have with the XLC. THE CORE: The core material is the foundation of a roller ski shaft and we have tried about every material available including a variety of metal cores. We have used organic cores like Baltic birch, Italian poplar, Balsa and many synthetic cellular cores. We now know from extensive experience that for roller skis, cellular cores are superior to metal cores. The XLC uses the best core we have tested to date. However, fabricating the cellular core is time consuming and expensive compared to an extruded core. BONDING: Composite structures need a very strong bond to both the fibers and the core. Bonding high strength fibers to a metal core can be more difficult than bonding to a porous cellular core. The metal must be aggressively etched for the fibers to bond properly. The cellular core we use has thousands of microscopic pores per square centimeter, and therefore the epoxy penetrates and bonds extremely well the core. The epoxy that binds the fibers to themselves and to the core has a tensile strength about 3X greater than conventional epoxies and is the strongest commercially available. The forks are made from aluminum and protected by a clear anodic coating. The wide 98mm wheels make them an excellent choice for non-paved surfaces and chip sealed roads. The wide wheel makes them the most stable of our two-wheeled classic skis. The XLC9848 is now available in two speeds: medium and slow. The rolling resistance in the 9848 slow free wheels is increased using two of our patented ISR (internal speed reducer), each weighing only 10 grams.
$399.00
XLC-920 Classic Rollerskis (930's available as a special order) The XLC are the lightest and the most snow-like solid rubber wheel roller skis we have ever produced. The vibration damping of the new composite frame is exceptional, and, coupled with the shock absorbing wheel forks, the XLC makes skiing on the pavement as similar to skiing on snow as possible. In addition to lower ski weight and improved vibration damping, another advantage of the XLC is a lower center of gravity. The clearance from the pavement to the bottom of the shaft is the same, but with the strong construction we can make the shaft thinner, so the top of the shaft is lower, making the skis more stable. Safety is high priority at Jenex, so all XLC models are available with our patented brakes and speed reducers. For skiers weighing over 90 Kg (199 pounds), we offer the XLC in a Heavy Duty (HD) version that is about 25% stiffer. COMPOSITE FIBERS: Over the last twenty years we have tested most high strength synthetic fibers, including the many variants of Carbon, S glass, E glass and Aramid. All of these fibers have strengths and weaknesses. Aramid (KevlarTM) fibers have high tensile strength, dampen vibration and re extremely abrasion resistant, but are very weak in compression. Carbon is extremely stiff and strong in both tension and compression, but breaks very easily from impact, which is why so many Carbon ski poles break in sprint and mass start races. Carbon is a great material, but to prevent impact failure Carbon fiber shafts need a core with good energy absorbing properties and perform best when combined with more impact resistant fibers. And that’s what we have with the XLC. THE CORE: The core material is the foundation of a roller ski shaft and we have tried about every material available including a variety of metal cores. We have used organic cores like Baltic birch, Italian poplar, Balsa and many synthetic cellular cores. We now know from extensive experience that for roller skis, cellular cores are superior to metal cores. The XLC uses the best core we have tested to date. However, fabricating the cellular core is time consuming and expensive compared to an extruded core. BONDING: Composite structures need a very strong bond to both the fibers and the core. Bonding high strength fibers to a metal core can be more difficult than bonding to a porous cellular core. The metal must be aggressively etched for the fibers to bond properly. The cellular core we use has thousands of microscopic pores per square centimeter, and therefore the epoxy penetrates and bonds extremely well the core. The epoxy that binds the fibers to themselves and to the core has a tensile strength about 3X greater than conventional epoxies and is the strongest commercially available. The wheel forks have much better fenders than the original 800 and 900 series skis. The combination fork and fenders are produced in Du Pont’s™ toughest thermoplastic, further strengthened with the addition of carbon fibers during the injection molding process. The non-metallic wheel forks reduce vibration, and for improved safety, all V2 Roller Skis are designed to accept the patented Jenex speed reducers and brakes. The XLC900 is available in 3 speeds. XLC930 is fast, XLC920 is medium and XLC910 is slow. The XLC910 are very close to snow speed. Roller ski study in Sweden. The 920 are medium slow and the 930 are medium speed. The rolling resistance in the 910 free wheels is increased using our patented ISR (internal speed reducer) that weighs only 10 grams. The wheel forks with the built in fenders use the same strong Du Pont™ composite material that we have employed on the V2-900 series for many years Specifications: Weight / pair: 1725 grams (4 lb) Wheelbase: 708 mm. ( 27.9 “) Wheel Dimensions: 70mm diameter X 41mm wide (2.75 in x 1.6”) Rubber composition: Highly abrasion resistant rubber with a durometer of 72 shore A. Bolts: 6x1x55 aluminum and 6x1x65mm grade 12-9 zinc-plated steel bolts. Optional Speed Reducer: ATRQ900 Optional Brake: BXLQ900 Replacement wheels: Front: RW9 ratchet wheel Rear- Free wheels: W10 – slow W20 – med W30 -med-fast
$36.00
W30 replacement wheels for all XL900, as well as older 900 and 900K series classic skis
$57.00
Complete, assembled replacement wheel for V2 Aero XL150 Skis. Includes tire, rim, tube, bearings, axle,and spacers Always check inflation before every use. NOT A PAIR - SOLD INDIVIDUALLY
$99.00
Lean back "tele-style" to activate this brake. A very effective braking system that gives the skier the safety and control needed for gradual or sudden stops. Only one brake needed per pair of skis. Compatible with the new V2 Carbon Classic 900Q.
$109.00
Fits Aero 150 Skis. These devices allow you to incrementally increase rolling resistance. Duplicate hills in flatlander country or contain the speed of killer descents to within sane limits. Speed reducers can open up hilly terraine previously too steep to descend. One per ski needed for proper function. Sold in pairs, call for singles.
Page 1 of 1