Your Search: "waxing service"

Power to the podium with the fastest possible skis with New Moon's Waxing Service for Birkie®. Our wax techs carefully study the snow conditions and test waxes to provide you with World-Cup grade performance. All skis are evaluated carefully cleaned and prepped. Technicians will inspect the base structure on your skis and will add structure, if needed. Then after considering the weather, your specific event, and timing we proceed with final application of the fastest race waxes available. As a US Ski & Snowboard sanctioned event, no fluoro wax will be allowed at the 2024 Birkie events. USSA conducts fluoro testing. IMPORTANT: We will accept skis up until NOON the day before your event for our premium wax service. You will receive a text when they are finished which may be anytime until we close. Just to remind you, we do not receive UPS or FedEx deliveries on Saturday and Sunday if shipping. NOTE TO CLASSIC SKIERS: Please ensure all kick wax is removed before drop off to avoid additional charges. Here are a few simple steps to follow: 1) Pre-order Birkie Events Wax Service here on this page. 2) Print your order confirmation and secure it to your skis with masking tape. 3) Mark your skis with your name and phone # on masking tape. 4) Drop your skis off at New Moon or carefully pack, insure, and ship your skis to New Moon Birkie Wax Service, 15569 US Hwy 63, Hayward, WI 54843 5) Allow sufficient travel or transit time, so your skis arrive on time. Skis will not be delivered to the start area on race day. If you wish to have New Moon ship your skis back to you post-race, please make arrangements with us during your Birkie visit. Good Luck at the 2024 American Birkebeiner!

Enjoy Birkie Week - leave the waxing to New Moon! For both Skate and Classic skis. Race prep at a lower cost. Everyone should enjoy fast skis. This option is an affordable option for the more casual racer. *Note to Classic Skiers: To avoid additional charges please make sure all kick wax is removed prior to drop off. A Few Simple Steps to Follow: 1) Pre-order Haakon Budget Wax Service here on this page. 2) Print your order confirmation and secure to your skis with masking tape. 3) Mark your skis with your name and phone # on masking tape. 4) Drop your skis off at New Moon OR carefully pack, insure, and ship your skis to: New Moon Birkie Wax Service, 15569 US Hwy 63, Hayward WI 54843. Skis should be at New Moon no later than Thursday 10am. We do not receive shipments on Saturdays and Sundays so allow sufficient travel or transit time so that your skis arrive in a timely manner. Curbside drop off and pick up is available. As a US Ski & Snowboard sanctioned event, no fluoro wax will be allowed at the Birkie events. Testing by USSA Good Luck at the Prince Haakon!

This is an add-on service for our Glide Waxing Service. Includes skin pattern cleaning and high-performance glide anti-icing and glide treatment applied to the skin pattern. Important for all snow conditions, but vital for dirty or wet snow conditions.

This is an add-on service for our Glide Waxing Service. Includes all necessary kick zone prep and binder layers. Please mark your kick zone. If you are unsure, please indicate your weight and experience in detail in the 'comments' field at checkout. This will help us determine your kick zone. *Final kick wax application is the skier's responsibility.

Power to the podium with the fastest possible skis with New Moon's Waxing Service. Our wax techs carefully study the snow conditions and test waxes to provide you with World-Cup grade performance. Service includes glide zone waxing and preparation specifically your race. If kick binder or skin treatment is needed, that can be purchased additionally. To avoid additional charges, please make sure all old kick wax is removed prior to drop off or kick zone is covered with tape. Skis need to be dropped off no later than 10 am before the event. Skis can be picked up between 2 pm and 5:30 pm that day. All drop off and pick up is at New Moon Ski Shop. The American Birkebeiner Ski Foundation has joined U.S. Ski and Snowboard in banning the use of fluorinated ski wax in competition beginning the 2020-2021 season. We encourage all competitors to abide by this policy for all events on the Birkie Trail and at the American Birkebeiner Trailhead.

New Moon will expertly apply binder and wax of the day for any occasion. Stop in and we will make this classic ski your best one! This is an add-on service for our Glide Waxing Service. Includes all necessary kick zone prep and binder layers. Please mark your kick zone. If you are unsure, please indicate your weight and experience in detail in the 'comments' field at checkout. This will help us determine your kick zone. The appropriate wax of the day will then be applied.

Spare part for waxing table. - Leveling foot - For waxing tables - For Swix waxing table owners - Easy adjustment

Clamps for fixing cross country waxing profiles to table. (T0793-2, T0795 or T0767-3) to waxing tables.

Durable glide wax for long distances and for race ski base preparation. Use as a base layer when waxing for races or as a training wax. Durable, easy to apply. Maintains ski base in new ski preparation and after stone grinding. Contains Rex Power Polymers with latest N-Kinetic™ additives. Think of it as a the LF Blue of post-fluor era, the service, training and calibration wax for racers and ski teams.

For brushing out and cleaning dirty bases prior to waxing. Also suitable for brushing out after hot waxing.

Brush with steel-hair for cleaning oxidized bases or damaged structures prior to hot waxing. Also suitable for brushing out after hot waxing.

Practical Waxing Iron Holder for mounting on to waxing table or workbench (max. 40 mm). Reduces the risk of dropping a valuable iron on floor. Fits all SWIX Irons.

800 watt economy waxing iron. 210F to 320F temperature range regulated through a solid state thermostat. Beveled and channeled base for ease of waxing.

Fibertex is a mat made of nylon fibers, which is mixed with fine abrasive particles to smoothen the base. SPECS The kit includes 3 different mats: Light brown: For gentle deburring on new skis or newly stone ground skis before waxing. For refreshening base without disturbing structure. Dark brown: To be used before waxing to remove oxidized layer to open base. White: For polishing after waxing and brushing.

Simple and compact, this waxing micro-profile easily packs into a wax box or backpack for convenient waxing virtually anywhere. The center clip fits all current bindings. Clamps accommodate tables or work benches up to 2.25" / 56mm thick.

Soft brass for opening up the base and structure before waxing. Great for team use, where lots of skis need to have bases freshened before waxing. Also, use it lightly for quick removal of very hard waxes.

Practical and robust transport and storage cover for the T00754 waxing table. The cover is stitched in thick and robust material that both protects the table and surroundings during travel and storage. Sturdy carrying straps make it easier to transport the waxing table. 38" x 18" x 4.25"

Wax table, perfect at home or at events. Waxing table that is easy to fold together. One leg is height adjustable for better stability on uneven surfaces. Fits two sets of cross country waxing profiles (T0766). Table top: 96 cm x 45 cm. Height: 83 cm. Weight: 11.5 kg/25.3 lbs.

Removes wax residue and preps the base for waxing.

Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax

Screw. 6 mm. Fits the waxing tables T0076/ T0075W/ T00754.

Space efficient and stable! Wax table, perfect at home or at events. Waxing table that is easy to fold together. Comes with four rubber feet for anti slip. One leg adjustable for better stability on uneven surfaces. Adjustable height: 87 cm, 85 cm or 75 cm. Fits two sets of cross country waxing profiles (T0766). Table top 120 cm x 35 cm. Net. weight: 11 kg/24 lbs.

Practical and durable bag for T0075 waxing table. 48" x 13.5" x 4.5"

Start Glide Zone Cleaner - This cleaning solution was created to clean the glide zones of your skis without removing the wax. This is not to be used on the kick zones of your classic skis, but instead on the gliding zones of your classic and skate skis. We recommend applying glide zone cleaner before waxing your skis every time. Glide zone cleaner removes dirt and other particulates that get on your skis while out skiing. Best practice is to apply a small amount of glide zone cleaner to disposable service towel and rub a thin layer onto the ski base. When the solution dries, your skis will be clean and ready to be waxed.

For optimal base cleaning prior to waxing. Rotation rate max. 800 rpm. Use the single axle with cover.

For optimal base cleaning prior to waxing. To be used as the first brush after scraping of paraffin. Approx rotation rate: 1500-1800rpm.

Swix Travel XC Profile 3 Piece Kit is a great way to get a secure waxing setup when you are traveling.

Gentle cleaning liquid for all types of base. Removes wax residue especially of Top Finish products and prepares the base for waxing.

Keep your waxes off the floor of your car and where they belong! Toko's all-new soft-sided wax case is the perfect solution for organized, efficient travel with your waxing supplies. The padded, main compartment protects your waxing iron from drops and impacts. Any size wax iron with its own iron cozy built-in. Its large, upper storage compartment includes two secure plastic bins for messy wax or klister. Two side zip pockets easily accommodate brushes, tools, and other accessories. Use with carry handle or the included shoulder strap.

Binder for klisters and kick waxes. Gives great adhesion and increases wear resistance for waxing. Works great as a primer for all grip waxes, not just klisters.

Protect your investment. Introducing our new wax iron carrier bag. The custom design carrier bag fits all SWIX waxing irons perfectly. The iron bag is equipped with fastening straps at the top that can be tightened to ensure a secure fit so the iron can’t shift or move while traveling. Made from Organic polyester and lined with heat resistant canvas. This carrier bag is essential for anyone who cares for their equipment. Highlights Protects the entire iron when not in use Heat resistant canvas Carry handles Fit to all types of Swix waxing irons Made for Base Preparation

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

A package of three Rex brushes - Nylon, Horsehair and Steel. You get all three and save $35! Rex Steel Brush - Our most popular tool with the techs. Great all around brush. Stainless steel brush is used to open up the base structure during waxing. The stainless steel brush is the most effective at removing wax. Rex Horsehair Brush - Used for opening up the base strucure after scraping off most hot wax, before finishing with a nylon brush. Like brass brush, horsehair brush is also more abrasive than a nylon brush. Rex Nylon Brush - Essential tool for waxers. Always finish glide waxing with a nylon brush.

Start synthetic kick wax is suitable for both old and new snow. This base wax improves the durability of the waxing. Add layers of different kick waxes on top according to the weather, temperature, and snow conditions.

Rex's well-known and trusted basic grip wax line contains some classics, which have been in production for over 50 years! Universal Tar: -1/-25°C (-13/30°F) Excellent wax for skiers who are looking for simplicity in their waxing, as well as for racing skiers. Despite it’s "Universal" name it's a fully proven race wax, especially at mild frosts 18/30°F (-1/-8°C). Light Green: -8/-15°C (5/18°F) The most popular Rex wax for cold conditions. On new snow provides a good grip at around -6°C. Use it in race waxing as a coating for softer waxes. Blue: -2/-8°C (18/28°F) The king of grip waxes! A classic that has been in production for decades, still remaining relevant. In Finland Rex Blue has gained a legendary reputation, just ask any finnish skier! It is used widely as a universal grip wax on cold temperatures. Its grip and glide properties can be adjusted by the thickness of the wax layer. The colder the weather, the thinner the layer. Blue Special: -1/-4°C (25/34°F) Another Rex-legend. A bit softer and more gripping than Blue (115) for milder frosts. Provides a good grip even on hard and worn track. Purple: 0/-2°C (28/32°F) Despite of its purple color, this is a pure below-zero-temperature wax, which is used in race waxing as a coating for PowerGrip Green. A secure choice for recreational skiers. Red: +1/-1°C (30/34°F) Red kick wax for zero conditions. When mixed or used as a coating for klisters, gives great protection against icing on new or loose snow. Base Wax:? Very sticky and durable base wax under any grip wax. The most durable result is achieved by applying a wax with an waxing iron to roughened ski base.

The Racing Iron Mat is the perfect accessory for your waxing station. Eliminate smoking irons, keep your iron base lubricated, and prevent your iron from falling on the floor. For use only with Toko wax irons.

Any Nordic skier who enjoys fast skis will appreciate this gift! Here are some of the most important and popular waxing essentials in the Nordic ski world for glide waxing with hot wax plus a new liquid wax prep twist. Perfect for waxers that already have or are planning on getting a wax profile , wax iron, and a wax iron. In this gift pack: Rex Glide Cleaner Liquid prep for base cleaning and priming for gliders. This represents the "new school" of ski waxing tech. Wipe Rex Glide Cleaner onto the base of the ski and allow to dry thoroughly. After drying, a thin wax layer is left behind as a "primer " layer for later waxes. Two legendary iron-in glide waxes - Start Green for the cold days and Rex Blue for everything else. A fresh, sharp New Moon Wax Scraper - time to retire those old, dull scrapers. Toko Groove Pin - handles grooves of all shapes and sizes: perhaps the handiest little tool at the wax bench! Now that the skis are all waxed up, protect them with some New Moon Ski Sleeves - they keep those fast bases safely separated for the drive to the trail! And for a great trail-head conversation starter, a New Moon Bumper Sticker!

For peeling Ptex from the base to remove scratches and gouges and to uncover fresh base material for better wax absorption. Also removes burned base material resulting from overheating in the waxing process. Comes pre-sharpened with a nice burr for making scraping a breeze. Easily resharpened on a diamond whetstone.

Kit containing all of the essentials for waxing Base Performance Liquid Paraffin. Contains 1 each of Base Performance Liquid Paraffin Yellow, Red, and Blue, a Base Performance Hot Wax Blue 120g, and a Yellow Liquid Paraffin Polishing Brush all in a high quality cordura zippered bag.

Rub-on wax for all types of snow and temperatures. - Improves sliding properties and cares for the base - Polish in using the cork on the back of the package or TOKO Thermo Cork - Very convenient for waxing en route - Very convenient for the care of ski skins to prevent the formation or adhesion of ice - Also used as rust protection for ski edges

Ideal for removing kick wax and klisters and cleaning up filthy ski bases. Also excellent for cleaning tools. Remember, avoid using base cleaners on a well-waxed base unless extremely dirty. This does not apply to the kick zone on classic skis. Purge waxing is always advised for cleaning well-waxed bases. 250ml aerosol spray can.

Quality, easy to adjust waxing profile. Same profile in front and back. Lightweight aluminium. Front and back part are both adjustable. Fixation in binding. Takes both classic and skating skis from 140 cm to 210 cm. Fits to T0079-1 legs or T0790-K clamps. Weight: 3 kg/6.6 lbs. Length of main stem approx. 1,61 meters.

The microprocessor control on this iron guarantees excellent temperature control. It heats quickly and is easy to use. The temperature range from 90° – 160° makes waxing safe for skis, even if you are not a prefessional skiman. Although this iron has a very interesting price range, it is entirely produced and tested in the STAR laboratory in Italy with the same technology and care that is applied for the top of the range.

Rex G-series spray gliders are special fluoro-free versions of our most advanced HF gliders. They feature all the technology advantages of Rex HF-series, without the use of fluoro compounds. Approved for use in junior racing in countries where fluorinated waxes are prohibited. In low moisture and artificial snow, the performance is almost on par with HF series, with similar durability. G-series gliders are great waxes for fast training and junior racing. Likewise to our HF Sprays, they are the most wax-containing liquid gliders on the market and do not need hot waxing to support their durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. G41 – Taking a step ahead and breaking the boundaries set by hot waxing! The new G41 Spray is not limited by the requirements set by hot waxing and scraping. The Special UHW wax is only possible to apply in liquid form. Being the hardest glide wax on the market, it gives unseen performance on artificial and coarse snow, and also on cold dry snow. 435 G41 UHW Pink/Green +5…-20°C Rex G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial 439 G21G "New Snow" Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology.. Never has Rex non-fluorinated glide wax been this fast! 437 G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast! 436 G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast!

Teal 500g HS-10 (-5F to 15F): 500g bulk bar is ideal for families, teams or skiers using large quantities of wax. "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Great wax for economically and effectively hardening ski bases for cold weather, and applies easier than extreme white. Comparable to Swix CH5X. Blue 500g HS-20 (12F to 28F): Bulk bar for high-volume waxing; high school teams take note! Fast Wax Blue is one of our more popular choices as a "universal" glider for waxers looking for a simple set-up and for hardening bases as an underway for a harder HF. Comparable to Swix CH6X. Red 500g HS-30 (22F to 32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. Yellow 500g HS-40 (30F to 50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.

Ideal for removing kick wax and klisters and cleaning up filthy ski bases. Also excellent for removing wax residue from scrapers, rillers and other tools. Remember, avoid using base cleaners on a well-waxed base unless extremely dirty. This does not apply to the kick zone on classic skis. Purge waxing is always advised for cleaning well-waxed bases. Aerosol for easy application.

Blue 600g Ultra Glide (14F to 30F) New Moon all-time best seller! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. super reliable choice for base waxing and training. Violet 600g Ultra Glide (23F to 32F) Popular glide wax in the 20s to mid=30s, especially on humid snow. Highly durable like its companion, Rex Blue.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Oslo kickers have quickly become some of New Moon's most popular kick waxes due to their reliable and forgiving kick in widely varying conditions. Designed with Norwegian snow conditions in mind where elevation and North Atlantic storms create complex waxing. For coarse, abrasive, or man made snow turning into powder as elevation or race conditions change. Can be corked in trailside! Non-fluorinated. Comes in: Super Green (5F to 19F) Extra Blue(18F to 28F) Purple (27F to 36F)

Protect your investment! Everyone, absolutely everyone, should be wearing respirators at all times when waxing. Not just for guys on the World Cup; every breath of fumes is one too many. Filters organic vapors, acid gases and particulates. Filters included. Non-returnable once packaging is opened. Face mask includes 1 pair of filter cartridges. Just install cartridges provided and it is ready for use. * Note: These respirators are intended for filtration of organic chemicals. They are not proven effective for viruses or other pathogens.

The best ever of the STAR waxing irons for professional use. This appliance with a full 25 mm die cast aluminum plate and 850 watt power is managed with the fastest electronic processor and is ideal on any type of skis and for all ski waxes. This iron offers the maximum that you could desire: optimized plate for applying powder fluor wax, new bigger and high brightness display,”touch” buttons to easily set temperature, absolute thermal control, and perfect ergonomic balance. Temperature range 90 – 200 C.

Original Blue 5º- 28.4ºF The king of glide waxes! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. Undefeatable choice for base waxing and training. Often the best solution for a recreational skier. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush. Original Purple 28.4º…41°F Popular glide wax from zero to mild frosts, especially on humid snow. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush.

Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.

NEW Fluor free version of Glide Cleaner. Cleanses the base as well as Rex Remover, but without making the base turn gray and dry. Apply generously to cloth or fiberlene, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. After treatment, Rex Glide Cleaner leaves a very hard and thin layer of Rex UHW hard wax, that acts as an excellent binder for both liquid and solid paraffin waxes. Always start a new glide waxing by cleaning with Rex Glide Cleaner. It will make the attachment and durability of sequent wax layers considerably better. Glides well even on its own on dirty and artificial snow, that is usually found in ski tunnels.

Hot waxing is an increasingly popular method for lubricating bicycle chains. The solid wax does not collect dirt, keeping the entire transmission of the bike clean and repelling dirt more effectively than traditional chain lubes. BLACK DIAMOND HOT WAX combines Black Diamond’s proven effective additive technology with over 70 years of wax experience from Rex. By switching to hot waxing, bike cleaning becomes much easier, and drivetrain component wear is dramatically decreased in long-term use. Hot-waxed chains don’t stain and do not require powerful solvents for cleaning. Instead, they can be easily cleaned with hot water only. We transformed the already thoroughly tested and effective Black Diamond additive technology onto a solid Rex wax base. To ensure high manufacturing quality, we put all the Black Diamond additives into one black piece, which is hand-cast in our product development laboratory in Hartola. The black additive piece can be thought of as a bottle of Black Diamond chain lube in solid form! The eleven white Rex paraffin blocks, carefully selected for their wax mixture, are combined with the additive block to guarantee the best lubrication performance on the market. By melting all the pieces (11+1 blend) together, you get a wax mixture that works perfectly in all conditions. For an extremely durable mixture for even the longest rides and races, melt the black additive piece with four pieces of base wax (4+1 blend). The remaining seven blocks of wax can be used as a cleaning pre-treatment wax to keep the 4+1 blend clean and maintain its high performance for longer. With the two-stage wax treatment option in one package, you get everything you need for optimal chain lubrication.

In the Kit: -Start Ultra Gel Yellow Wax 50ml wipe-on.14 to 41 F. Universal warm liquid glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Start Ultra Gel Blue Wax 50ml wipe-on. 10 to 28 F. Universal cold liquid glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Rex Glide Cleaner 170ml. Cleans and primes base for further waxing. Wipe on, let dry, brush lightly. Free New Moon Ski Ties and Bumper Sticker. Good at all temps and snow snow conditions! *With all liquid prep and liquid waxes, apply at room temp and allow to dry completely. Brush lightly with soft nylon or horsehair brush before skiing. Stiff nylon brush will also work fine.

ULTRASONICALLY TREATED IN REX R&D LAB The secret of this new lube is the Black Diamond particles that are mixed into the lube in a time-consuming ultrasonication process at our factory’s Racing Service lab. The Black Diamond particles significantly improve the properties of the lube: Lower friction, lower wear and increased rain resistance. In continuous metal-to-metal contact that occurs in drivetrain while riding, the particles form an ultra-thin and hard layer that minimizes friction and wear, and is also waterproof NEXT LEVEL COMBINATION OF DRY AND WET WEATHER PERFORMANCE Previously, seeking for the lowest possible friction in a chain lube has meant sacrificing all-weather performance. So-called “wet” lubes have traditionally been very energy-stealing. Rex Black Diamond combines test-winning friction levels with strong weather resistance in a previously unseen way. Black Diamond has been tested in demanding race conditions by our elite athlete team. The true king of chain lubes! N-KINETIC™ WAX FEATURING THE LATEST RACE SKI WAX TECHNOLOGY They have upgraded the wax blend used in Black Diamond lube to the same Rex N-kinetic™ technology that is used in the best cross-country ski waxes. The slightly lower viscosity results into lower friction and better lube penetration into the chain. Rex is well known for its world cup level fluorinated ski waxes and is an expert in paraffin wax-based applications with six decades’ worth of experience. WAX BASED SOLVENT-FREE, NON-VAPORIZING, UNDILUTED Adding solvent or water to a chain lube is generally thought to be a great way to reduce manufacturing cost and giving the manufacturer a better margin. At Rex, we think otherwise. Every drop you apply on the chain is 100% lubricant and not something that will evaporate into the air. Unlike with most chain lubes, there is no need to wait until the solvent evaporates before you can ride your bike. UP TO 30 WAXINGS FROM A SINGLE BOTTLE UP TO 500 KM WITH ONE WAXING

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Best Fit Form Skier Profiles Profile: 3-5 *Does not include bindings. Be sure to order bindings if needed. The TS Carbon Pro features a shorter and wider skin profile designed to provide a secure kick while maintaining high-level glide. Constructed using Cold Base Bonding technology, the base provides better waxing and grindability to maximize speed. FEATURES -100% mohair skin for maximum glide -Twin Skin strips offer solid grip -Lightweight Air Core Carbon construction -Cold Base Bonding -Finish First -Prewaxed -Precision Pairing System -Computer Flex Control -Fischer Carbon Fiber -Twin Skin **Don’t worry about equipment sizing – If you're not sure which size to order, choose your best guess and fill out our Best Fit Form. You will be contacted if there are any questions.