16mm Dia, fits round shafts only. Fits only Swix TCS clip-style straps. Sold in pairs.
The TCS Adjustable strap system allows quick and secure attachment to TCS Grips. These straps wrap around the hand from the outside of the hand rather than over the thumb as seen on the TCS Adjustable Straps. Remove from grip with included tool. Work only with TCS - style grips. Sizing runs small - consider a larger strap size for easier fit.
Sold in pairs. Replacement grips for triangular Triac shafts only. Any TCS strap is compatible.
Note: Does not include wedges. Sold in pairs. Replacement grips for triangular Triac shafts only.
Most durable version of the new Triac 3.0 TCS strap system. Allows for quick and secure attachment to the Triac 3.0 Grip or Quantum Grip. These straps wrap around the hand from the outside of the hand rather than over the thumb as seen on the TCS Adjustable Straps. Remove from grip with included tool. Work only with TCS - style grips. Sizing runs small - consider a larger strap size for easier fit. Sold in pairs.
The TCS Adjustable strap system allows quick and secure attachment to TCS Grips. These wrap around the hand over the thumb rather than from the outside if the hand as seen on the TCS Pro-Fit version. Remove from grip with included tool. Work only with TCS - style grips. Sizing runs small - consider a larger strap size for easier fit. Compatible with Quantum 1, 2 & 3 poles as well as the Triac 3.0 pole.
Sold in Pairs. Innovative glueless installation allows for easy pre-race swaps if conditions change. Heck, change 'em mid-race if you want! Choose XS or Small for hard and medium track conditions and Large or the Large 97 for the softest conditions. Fit TBS Shafts only (Triac TBS, Star TBS, Team TBS and Carbon TBS). XS Carbon Claw (upper left) is 1.25" wide. Small Carbon Leaf (upper right) is 2" wide. Large Carbon Paw (lower left) is 2.5" wide. Large 97 (lower right) is 2.5" wide, but is largest overall.
Note: Does not include wedges. Dual density rubberized grips are Swix's most durable. Fits 16mm Swix round shafts. Sold in pairs.
Note: Does not include locking wedges. The standard for ergonomic straps. Highly adjustable and very durable. Comfortable Neoprene padding. S-XL. Sold in pairs. Compatible Swix Grips: Triac non-TCS, Cork, Urethane Cork or Dual Density Plastic.
Standard, glue-on design. Classic "97" shape. Fits Swix and other 10mm shaft tips. Specify Small - 2 inch width, or Large - 2.5 inch width.
Sold in pairs. Innovative glueless collet design fits TBS shafts only (Triac TBS, Star TBS, Team TBS and Carbon TBS).
VP-RSTD10G3 V2 has a worldwide reputation for good roller ski ferrules. We tried many different carbide formulations before we found the best compromise between hardness and strength. Carbide is very brittle, and if not securely held in the plastic housing the tip can easily break. We developed geometry between the carbide tip and plastic that for over twenty years has been bulletproof. When we decided to make a shock-absorbing ferrule, we knew from experience that spring loading the carbide tip was not the answer. We wanted the shock-absorbing feature to be independent of the carbide tip. The major advantage is that if the shock-absorbing spring should fail, the carbide tip remains intact and the skier is still able to pole. For the G3 version, we changed the spring retainer from a plastic unit to a high-strength 4mm socket bolt. We are now able to use a smaller diameter spring with a higher damping force. As can be seen in the graph below, the damping stroke has been increased by approximately 40%. The spring force when the damping plunger first hits the pavement is lower on G3 than on the previous models, but after only 1.5mm of compression the force is equal to starting force of G1 & G2, and then increases rapidly. When the carbide tip penetrates the pavement the damping force of G3 is more than 2 times greater than G1 and G2. The result is greater shock absorption. Another advantage with G3 is that if the spring should fail it can be replaced by removing the nut and 4mm bolt. This was not possible in the G1 and G2 version REPLACING THE SPRING OR ALTERING THE LENGTH OF THE DAMPING STROKE Tools required: 3mm Allen wrench (supplied) and 7mm wrench (not supplied). The damping stroke can be shortened by tightening the nut. We do not recommend lengthening the damping stroke by loosening the nut. To replace the spring, or bolt, simply place the 3mm Allen wrench in the head of the socket bolt and with the 7mm wrench remove the nut and install a new spring or bolt. When supplied the bolt is covered with a light layer of grease. If the spring-loaded device is not moving smoothly compress the spring by pushing the bolt against a solid object and put grease on the non-threaded portion of the bolt.
This is Swix's newer design for 10mm pole tips. This version is slightly lighter than the original roller ferrule design . Carbide spike can be resharpened with diamond stone many times. Fits 10mm shaft tips. Glue on shaft. Sold in pairs.
Super durable and affordable ferrule option for rollerskiing. Carbide spike can be resharpened with diamond stone many times. Specify size when ordering. Require sharpening. Sold in pairs.
Locking wedges for Triac grips and straps. Color may vary. Sold in pairs.
6gm pillow suitable for 4-6 grip and basket changes. Low melting point allows easy installation and removal of pole parts. Does not become brittle in cold weather. Heat carefully with heat gun or flame. Peel off excess glue and reuse. Packaging may vary.
Page 1 of 1