Skip to main content

Filter By:

Elite

Swix HF Liquid Spray
$99.00
Future Cera HF6 Blue Temperature range from -4°C to -12°C (25°F to 10°F). A liquid spray-on racing wax that can be used alone, or as an underlayer for powders and top coats. Especially developed for colder conditions, down to minus 12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. HF06XL is a versatile wax that works in all snow conditions, but is at its best when the humidity is high. HF7 Violet Temperature range from -2°C to -7°C (28°F to 19°F). A liquid spray-on racing wax that can be used alone, or as an underlayer for powders and top coats. Performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and are not humidity sensitive. A safe choice that rarely underperform within its core area of use. HF8 Red Temperature range from -4°C to +4°C (25°F to 39°F). A liquid spray-on racing wax that can be used alone, or as an underlayer for powders and top coats. Extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above and everything between. Basically a must have in conditions you will meet often.
Swix TS Fluoro Free Wax 40g
$80.00
Swix Top Speed waxes offer the ultimate in fluoro-free glide and durability. A proprietary mix of non-toxic additives makes these waxes a viable replacement to fluorocarbon race waxes. TS5 is the hardest wax in the TS lineup making it an excellent choice for cold, aggressive snow conditions that might easily strip a less durable wax out of the base. Despite its hardness TS5 has a relatively low melt point making it much easier to apply compared to similar waxes. TS5 TURQUOISE -10ºC to -18ºC (14ºF to 0ºF) air temp. Replaces Swix HF5X. Fluoro Free. The hardest, most durable wax in the TS line. Great durability and dry friction properties. Use on fresh, old or manmade snow. Recommended iron temperature setting of 150ºC (311°F). 40g/1.4oz TS6 has a temperature range that is perfect for early to mid winter conditions where you may encounter harder or dryer snow conditions. Easy to apply with great durability. TS6 BLUE -6ºC to -12ºC (21ºF to 10ºF) air temp. Replaces Swix HF6X. Perfect for typical winter conditions. Fluoro Free. Recommended iron temperature setting of 145ºC (293°F). 40g/1.4oz Swix TS7 is an excellent wax for conditions just below freezing, a perfect choice for much of the PNW early to mid season. TS7 VIOLET -2ºC to -8ºC (28ºF to 18ºF) air temp. Replaces Swix HF7X. Fluoro Free. PNW early to mid season wax of choice. Recommended iron temperature setting of 140ºC (284°F). 40g/1.4oz Swix TS8 straddles the freezing point with a generous temperature range making it versatile and forgiving. This is the go-to wax as the season trends toward spring. TS8 RED -4ºC to 4ºC (25ºF to 39ºF) air temp. Replaces Swix HF8X. Fluoro Free. Versatile wax with a wide temperature range. Recommended iron temperature setting of 130ºC (266°F). 40g/1.4oz
Swix X High Fluorocarbon 40g
$79.00
HF waxes are unique because they provide fast acceleration, work in a wide range of temperatures and are durable and dirt resistant. They are excellent when used alone, but ideal when used in combination with Cera F as an over layer. Conditions of high humidity are optimal for HFX waxes. HF4X: Temperature range: -25F to 10F. Recommended iron temp: 155C (311F).Ski bases melt at 150C so apply this wax with a good iron, move quickly, and don't linger on the base! Used especially in dry friction conditions. The advantage of fluor at these temperatures is most present when the air humidity is high - above 80 %. HF4X can be used as a race wax alone or as a base for Cera F powder FC04X. HF05X: Temperature range:7F to18F. Recommended iron temp: 150C (311F). While still having excellent performance in cold conditions, HF5X has a lower melting point compared to HF4X making it easier to work with. HF5X can be used as a race wax alone or as a base for Cera F powder FC05X . HF6X: Temperature range:14F- 23F. Recommended iron temp: 145C (293F). A very popular wax both in alpine and cross country it has shown good properties on artificial snow in addition to natural snow. HF6X can be used as a race wax alone, but is often used as a base for Cera F powder FC6X . HF7X:Temperature range: 18F to 28F. Recommended iron temp: 140C (284F). A versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. HF07X can be used as a race wax alone, but is often used as a base for Cera F powder FC07X . HF8X: Temperature range: 25F to 39F. Recommended iron temp: 130C (266F). Over the last decade this wax has contributed to a numerous of Olympic and WC medals in all ski disciplines. It's softness and high fluoro content makes it perfect in conditions on both sides of the freezing point. HF08X can be used as a race wax alone, but is often used as a base for Cera F powder FC08X . HF10X: Temperature range: 32F to 50F. Recommended iron temp: 120C (248F). Slightly harder than its predecessor HF10X is now more durable, lasting longer warm conditions. HF10X can be used as a race wax alone, but is often used as a base for Cera F powder FC10X
Swix X High Fluorocarbon BW 40g
$79.00
HFBW Black Wolf waxes have provided excellent results in both the World Cup and World Championships in cross country and biathlon. Black Wolf's strength is its performance on artificial snow, transformed snow and dirty snow as well as in cold, dry conditions with high friction snow. HFBW4X: Temperature range: -25F to 10F. Recommended iron temp: 155C (311F).Ski bases melt at 150C so apply this wax with a good iron and move quickly. Don't linger on the base! A special wax for extreme cold conditions with BW solid lubricant additive that reduces the dry friction in very cold snow. HF4BWX can be used as a race wax alone or as a base for Cera F powder FC04X. HFBW05X: Temperature range: 7F to 18F. Recommended iron temp: 150C (311F). While still having excellent performance in cold conditions, HFBW5X has a lower melting point compared to HFBW04X making it easier to work with. It's BW solid lubricant additive reduces friction in very cold snow and dry friction conditions. HFBW5X can be used as a race wax alone or as a base for Cera F powder FC05X . HFBW6X: Temperature range: 14F to 23F. Recommended iron temp: 145C (293F). A very popular wax both in alpine and cross country it has shown good properties on artificial snow in addition to natural snow. It's BW solid lubricant additive reduces friction dry friction and contaminated snow. HFBW6X can be used as a race wax alone, but is often used as a base for Cera F powder FC06X . HFBW7X:Temperature range: 18Fto 28F. Recommended iron temp: 140C (284F). A versatile wax suited for normal winter conditions below the freezing point. Works well on artificial snow in addition to natural, transformed older snow when friction is high or snow is contaminated. HFBW7X can be used as a race wax alone, but is often used as a base for Cera F powder FC07X . HFBW8X: Temperature range: 25F to 39F. Recommended iron temp: 130C (266F). Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. It can also be used with Cera F powder FC08X . HFBW10X: Temperature range: 32F to 50F. Recommended iron temp: 120C (248F). Slightly harder than its predecessor HFBW10X. The adjusted hardness makes the wax more durable and absorbs less dirt. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. It can also be used with Cera F powder FC10X .
Swix HS Fluoro-Free Wax System 60g
$40.00
The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).
Page 1 of 1