Ski Wax

PFC Performance Hot wax for racing and practice sessions in all disciplines. Has a bonding agent for Top Finish products. Good sliding properties, durable and can be used as a base layer in races. This is the exact same product that is used and available at the World Cup and Olympic Games. The wax case is resealable. Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F - Cold & Aggressive Snow Conditions Universal: 3/32F, air temp. 3/36F - Wide range of use in medium snow temperature conditions Warm: 25/32F, air temp. 25/50 - High moisture and wet snow conditions

Everything you need to maintain your skins in great gliding condition and prevent icing on those tricky wet snow days. Kit includes: Eco Skin Proof -Keeps your racing, touring or BC skis so they do not freeze, saturate with water, or collect dirt. ECO friendly formula. Skin Ski Cleaner -Gently cleans skin ski hair patterns allowing better kick, especially on glazed trails. Formulated with special, skin-safe solvents that will not dissolve or soften the adhesives use for skin patterns. Use whenever skin pattern appears matted or discolored from debris. Simply spray on skin until damp, and wipe with cloth or base-tex from tip to tail. Allow to dry. Then, re-apply ski wax treatment before skiing. Base Tex -Special fleece for base cleaning and different types of polishing.

Contains items needed to care for skin skis including: - Skin Cleaner 100ml - Skin Proof 100ml - Express Pocket 100ml - Base Tex 15m.

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

NEW PFC FREE Toko 125 ML Liquid Paraffin Wax. Where high performance meets convenience! Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: Hard liquid wax for snow temperatures -22/14 °F, air temp -22/16 °F. 0-60% relative humidity. Red: Medium hard liquid wax for snow temperatures 10/25°F, air temp 12/28 °F. 40-80% relative humidity. Yellow: Soft liquid wax for snow temperatures 21/32 °F, air temp 25/50 °F. 80-100% relative humidity. -Wide application range for common conditions in the medium snow temperature range. -Very long-lasting wax adhesion. -Can also be used as adhesion promoter for top finish products. -Fast processing. -For brushing/polishing use the Polishing Brush Liquid Paraffin

Kit containing 1 each of Base Green Binder, Yellow, Red, and Blue, a plasto cork, and a multipurpose scraper all in a high quality cordura zippered bag.

120g Base Performance Yellow/ Red/ and Blue/ a nylon brush/ and a 3mm plexiscraper all in a nice kit bag!

PFC Free High performance racing hot wax to meet the highest demands. This is the same exact wax used at World Cup and Olympic events. Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F Universal: 3/32F, air temp. 3/36F Warm: 25/32F, air temp. 25/50 -Optimal sliding properties -Unmatched durability -Best bonding agent for Top Finish products -Resealable wax case

Jet Liquid is a fluor free top finish for racers. Yellow for high moisture wet snow Red for a wide coverage of mid range snow temperatures Blue for cold snow Recommended snow temps Yellow 32f to 25f Red 28f to 10f Blue 14f to -4f

Kit containing all of the essentials for waxing Base Performance Liquid Paraffin. Contains 1 each of Base Performance Liquid Paraffin Yellow, Red, and Blue, a Base Performance Hot Wax Blue 120g, and a Yellow Liquid Paraffin Polishing Brush all in a high quality cordura zippered bag.

Top finish powder for racing at the highest level. Warm Mid Cold

Includes 120g size Base Performance Yellow, Red, and Blue hot wax. Also includes 100ml Express Pocket liquid wax. 3mm Plexiscraper, Nylon Brush, Express Tuner Kit, T8 Iron, and a medium Diamond File are also included. Comes in a nice kit bag. A $250 value!

Kit containing a T18 Iron and one each of World Cup High Performance Hot Wax 120g Warm, Universal, and Cold

Blue (14/28F new) (5/23F old) Excellent in the teens and low twenties, especially with low humidity. If tracks are slippery, use V40 Blue Extra. Blue Extra (19/30F new) (12/27F old) One of the true classics. Nearly universal performance in sub-freezing temps. Apply thinner for temps below 20F. A must-have for any classic skier. Green (5/18F new) (0/12F old) Swix's standard cold kicker. Works reliably down below zero. Easily covered if temps warm up beyond the green temp range. Polar (-22/5F new snow) (-12/10F old) An old fave of the die-hard cold weather crowd. Applies much easier at room temp. Be sure to cork to a glassy, smooth surface. Apply long if tracks are soft or slippery. Red/Silver (32/38F new) (30/34F old) Very tacky for very wet and fresh snow min the 30s and 40s. May need to be covered if icing is a problem. Special Red (28/34F) A popular choice for many classic skiers. Good for those wet days with fresh snow that is not quite klister snow. One of the essential kick waxes. Violet (32F new) (27/30F old) For damp, sticky snow right at freezing. Prone to icing if snow is fresh. Cover with Rex Hydrex if icing is a problem. Violet Special (27/32F new) (21/28F old) For moist snow beginning to get sticky and damp. Cover with some blue extra if icing occurs.

Fluor Free Liquid glide wax for skin skis. With a sponge foam applicator for easy application. Also available with a felt polisher for polishing and extra durability. A liquid glide wax for skin skis For all temperatures For everyone using skin skis Excellent glide in no time

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

Green Base Klister Spray. Temperature range 5°F to 50F. Apply a thin layer. Use regular klister on top, adjusted to the conditions, or aerosol Quick Klister. Upside down spray applicator for controlled spray-on application. The Base klister is applied by holding the bottle upside down and move it slowly along the ski on both sides of the groove. Distance between the base and nozzle should be 4-5 cm. For Racing, Sport and Recreation.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Durable base binder for added durability. Base binders are essential for long outings or marathons. Apply to a clean kick zone by touching stick to a warm wax iron and then dabbing to the ski. Warm again on ski with iron and cork out to a smooth finish. Let cool before applying he wax of the day.

The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

The KX klisters are durable klisters custom-made for different conditions.

The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience. VP30 Pro Light Blue For new and new fallen fine-grained snow from -8°C to -16°C (18°F to 3°F). Old/partly transformed snow from -12°C to -20°C (10°F to -4°F). Light blue kick wax designed for dry and cold to extremely cold conditions. VP40 Pro Blue For new and new fallen fine-grained snow from -4°C to -10°C (25°F to 14°F). Old/partly transformed snow from -5°C to -14°C (23°F to 7°F). Blue kick wax designed for dry and cold winter conditions. A safe choice for normal midwinter inland conditions. Apply each layer thin – then smooth the surface with a synthetic cork (T12). VP45 PRO BLUE/VIOLET For new and new fallen fine-grained snow from -1°C to -5°C (30°F to 23°F). Old/partly transformed snow from -3°C to -8°C (27°F to 18°F). Purple-blue kick wax designed for normal winter conditions well below the freezing point. An obvious “next step” if VP40 does not provide a safe kick. VP50 PRO LIGHT VIOLET For new and new fallen fine-grained snow from 0°C to -3°C (32°F to 27°F). Old/partly transformed snow from -1°C to -6°C (30°F to 21°F). Purple kick wax designed for conditions a few degrees below the freezing point. Provides perfect kick until you experience moderate shiny tracks. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. V55 PRO VIOLET For new and new fallen fine-grained snow from 1°C to -2°C (34°F to 28°F). Old/partly transformed snow from 0°C to -5°C (32°F to 23°F). Dark purple kick wax designed for moist, and new or new fallen snow around zero. Can also be used on older snow just below the freezing point without sacrificing glide. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. VP60 PRO VIOLET/RED For new and new fallen fine-grained snow from 2°C to -1°C (36°F to 30°F). Old/partly transformed snow from -1°C to -4°C (34°F to 25°F). Purple-red kick wax works very well in moist new snow and shiny tracks. Will also work on older, slightly transformed snow some degrees below the freezing point. If tricky conditions around zero VP65 is recommended. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. VP65 PRO BLACK/RED For new and new fallen fine-grained snow from 0°C to 2°C (32°F to 36°F). Old/partly transformed snow from 0°C to -4°C (32°F to 25°F). Red/black kick wax with extraordinary properties when tricky conditions around the freezing point. Also brilliant on the cold side when high humidity and older/transformed snow. The black additive speaks for versatility and great anti-icing properties. VP65 works best on top of a couple of layers of a slightly harder wax. It also works great as a cover on top of klisters. **Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

More sliding & less sticking! Simply wipe on the entire length of your waxless ski for better glide, less sticking and more fun. Containers stow easily. Don't leave home without 'em! Fluoro-free.

Keep your skins skis from grinding to a halt when wet snow, around freezing, can cause the skis to ice up so that Skin skis can be problematic in wet or dirty snow as the snow can stick to the skin and cause that nasty situation of a ski that doesn't grip but also doesn't glide. Skin inserts need occasional treatment to resist this situation and of course Swix has come up with a solution that is easy to use and performs admirably. Application: Rub on to the skin using a back and forth motion to coat the hairs of the skin. Dry for 30 min. before skiing or applying Swix Skin Boost.

FROM THE MANUFACTURER Surmount Skin Rub-on Wax is an easy-to-use wax to improve the performance of your climbing skins. Developed to enhance skins' glide in soft snow conditions and to reduce the uptake of dirt from the snow. Rub the wax into the skins in a two-directional motion. After application the skins are ready to go. When conditions are very wet it is recommended to apply Surmount Skin Impregnation (SU-N20) onto the skins before applying the Surmount Skin Rub-on Wax. FEATURES -Easy to bring in your pocket or backpack -Improves skin glide -Reduces dirt uptake -Improves water repellency

Universal silver klister for recreational and racing skiers. Gives a great kick. K21S UNI SILVER KLISTER 3C TO -5C (23°F to 38°F) K22 UNI VM KLISTER -3C TO 10C (27°F to 50°F)

Zero spray for the grip zone on classic skis with mechanical grip or skis that you yourself have rubbed. Prevents icing on new and wet snow around 0°C. Bottle with "upside-down" spray nozzle for easy application. Allow the spray to dry for a few minutes after application. - Impregnation for zero skis - Too conditions around freezing - For those who want a better skiing experience - Reduces the risk of icing and improves glide

New non-fluoro Swix Skin Boost improves the glide of your skins as well as helps avoid icing. Recommended maintenance for skin skis to extend their life span and get a better ski experience.