Your Search: "seat pack"

Engineered to incorporate a power system that boasts a 500-watt pedal-assist rear-drive motor, the Sunseeker E-Fat-Tad Electric-Assist Tadpole is ready to take your ride to the next level. Whether it is off-road terrain or smooth roads ahead, the E-Fat-Tad offers 24 speeds, breathable mesh seating, rugged CST 4" wide tires, and 48 volt / 10.4AH LiOn Battery pack for speeds up to 20 mph. - 20 mph / 500-watt pedal-assist motor - 48V / 10.4Ah lithium-ion rack-mount battery - Class 1 with five levels of pedal assist - Rear coil-over suspension and integrated front suspension - Promax mechanical disc brake system for front wheels - Alloy rims, 55mm wide, with 20 x 4.0" tires tuned for all trail conditions - Full-range SunRace shifting with 3x8 gearing - Ergonomic Chromoly handlebars - Air-mesh seat with alloy seat frame - 10" of trail-ready ground clearance - Wheel Base: 46.25" (118cm) - Overall Length: 78" – 83.5" (198 – 212cm) - Width: 36.25" (92cm) - Seat Height: 16.5"– 17.75" (42 – 45cm) - Bottom Bracket Height: 20" – 21.5" (51 – 55cm) - Weight: 84 lbs - Weight Limit: 300 lbs - X-Seam: 37" – 50.5" (94 – 128cm) - (Boom modification may be required from 37" – 40")

The E-Eco Tad Electric Assist Tadpole is engineered to incorporate a power system that boasts a 350-watt pedal-assist rear-drive motor along with a 36 volt / 10.4 Ah Li-ion battery pack for speeds up to 15 mph. This is our most affordable pedal-assist tadpole trike, but just because it's affordable doesn't mean that it's not full of features. It has a fully adjustable mesh-back saddle with a padded bottom that keeps you cool and comfortable on long outings. Plus, there are spare bottle mounts on the seat frame to let you carry plenty of hydration for the long hauls. - 15 mph / 350-watt pedal-assist motor - 36V / 10.4Ah lithium-ion rack-mount battery - On-board Bluetooth battery management system - Class 1 with five levels of pedal assist - Throttle is available as an option - Wheel Base: 37.5" (95cm) - Overall Length: 70.5 – 78.75" (179 0 200cm) - Width: 31" (79cm) - Seat Height: 15 – 17" (38 – 43cm) - Bottom Bracket Height: 13.75-14" (35-35.5cm) - Weight: 65 lbs - Weight Limit: 300 lbs - X-Seam: 30 – 52" (76 – 132cm)

Why follow tracks when you can make your own? Experience the "Foot out, flat out" fun of fat biking in any seasons. Whether you're tackling fresh snow pack or drifty sand dunes for days, the new Yukon will keep you rallying your favorite terrain in a whole new way.

Why follow tracks when you can make your own? Experience the "Foot out, flat out" fun of fat biking in any seasons. Whether you're tackling fresh snow pack or drifty sand dunes for days, the new Yukon will keep you rallying your favorite terrain in a whole new way.

A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups - BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive - BO-2 Bottle Opener - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DCW-1 Double-Ended Cone Wrench: 13/14mm (2) - DCW-2 Double-Ended Cone Wrench: 15/16mm (2) - DCW-3 Double-Ended Cone Wrench: 17/18mm - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HCW-15 36mm/32mm Headset Wrench - HMR-8 Shop Hammer - HT-8 8mm Hex Tool - HXS-1.2 Hex Wrench Set - LP-7 Utility Pliers - MLP-1.2 Master Link Pliers - MW-8 Metric Wrench: 8mm - MW-9 Metric Wrench: 9mm - MW-10 Metric Wrench: 10mm - PAW-12 12" Adjustable Wrench - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SZR-1 Shop Scissors - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set

The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades. Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm - BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II - BBT-22 Bottom Bracket Tool - BBT-69.2 Bottom Bracket Tool - BO-2 Bottle Opener - CBW-1 Open End Wrench: 8/10mm - CBW-4 Open End Wrench: 9/11mm - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DAG-2.2 Derailleur Hanger Alignment Gauge - DH-1 Dummy Hub - DP-2 Threaded Dummy Pedal - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HMR-8 8 oz. Shop Hammer - HXS-1.2 Hex Wrench Set - MLP-1.2 Master Link Pliers - NP-6 Needle Nose Pliers - PAW-6 6" Adjustable Wrench - PH-1.2 P-Handle Hex Wrench Set - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SBC-1 Spoke, Bearing and Cotter Gauge - SBS-1.2 Socket and Bit Set - SCW-13 13mm Shop Cone Wrench - SCW-14 14mm Shop Cone Wrench - SCW-15 15mm Shop Cone Wrench - SCW-16 16mm Shop Cone Wrench - SCW-17 17mm Shop Cone Wrench - SCW-18 18mm Shop Cone Wrench - SCW-19 19mm Shop Cone Wrench - SP-7 Side Cutter Pliers - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SWR-8 3/8" Drive Ratchet Handle - SZR-1 Shop Scissors - TL-1.2 Tire Lever Set - TL-4.2 Tire Lever Set - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set - UP-SET Utility Pick Set - VC-1 Valve Core Tool - ZP-5 5" Flush Cut Pliers

Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.

Sunday designed the High C 29" with a 100% Full Chromoly Frame, Fork, and Bars, in order to make it one of the most reliable 29" bikes on the market. Whether it's cruising all day, jumping curbcuts, or wheelie-ing around, this bike is intended to handle it all. The frame has a unique shortened rear-end geometry compared to most bikes on the market of this size to make it easier to handle and manipulate in tough positions. It's also equipped with a quick release seat clamp to make changing up your riding style a breeze. - 29" cruiser geometry - 100% chromoly frame, forks, and bars - Seat tube bottle cage mounts - Odyssey Twisted Pro pedals - Maxxis Torch tires - Sunday quick release seat clamp - Sunday quick release seat clamp

The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FSA® and other manufacturers also make headsets in this standard. Includes upper and lower cutters.

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.

- Designed for reaming and facing Cane Creek standard Integrated headset frames designed for 41.0mm x 36/45 degree angular contact bearing - Includes 1) lower and 1) upper reamer/facer cutters - For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter - Combined reaming/facing cutters for 2-in-1 operation

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups. - 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs - 8 installation drifts for standalone bearing installation - Organized in a convenient storage case - Full list of compatible bearing inner/outer diameters found on instructions/parts diagram NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).

The Powersocks Heat Fusion Uni ND are unisex heated ski socks. Technical, soft and breathable, they efficiently wick away moisture thanks to their specific micro-channel construction. These heated ski socks also provide maximum comfort in the sensitive areas of the foot, namely the shin, calf and instep. These heated ski socks come with a pair of S-PACK 1400 batteries, designed to give you up to 16 hours of warmth during your days in winter sports. These batteries are equipped with Bluetooth technology, so you can control the heating of your socks from your smartphone. This set contains: 1 pair of Powersocks Heat Fusion Uni ND socks 2 S-PACK 1400B batteries

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X 1.75 - Tap-15.1: 15Mm X 1.0 - Tap-15.2: 15Mm X 1.5 - Tap-20.1: 20Mm X 1.0 - Tap-20.2: 20Mm X 1.5 - Tap-20.3: 20Mm X 2.0

Enjoy winter exercise to the full with the Therm-ic Heat Kit. Includes a set of heat elements, topcovers and 1 pair of C-pack batteries. - Fitted with ultra-fine heating elements diffusing constant heat for immediate well-being and an optimal foot temperature. - Stick-on Therm-ic topcover for added comfort and refinish Custom, 3Feet and 3D insoles (1 pair). - One size, easy to trim. - Fitted with Bluetooth© technology, you can now control remotely the heat settings via your smartphone, using the Thermic Heat Control App. - The C-pack 1300 B batteries provide up to 13 hrs of heat. - (For 17hrs of heat, check the C-Pack 1700 or 1700B) - Suitable for use with Therm-ic C-Pack battery range only. The best value for money, this C-Pack 1300 B battery pack comes with three heat settings to help keep your feet warm all day long. Warm feet for up to 13 hours.

The Powersocks Heat Fusion Uni are unisex heated ski socks. Technical, soft and breathable, they efficiently wick away moisture thanks to their specific micro-channel construction. These heated ski socks also provide maximum comfort in the sensitive areas of the foot, namely the shin, calf and instep. These heated ski socks come with a pair of S-PACK 700 batteries, designed to give you up to 8 hours of warmth during your days in winter sports. This set contains: 1 pair of Powersocks Heat Fusion Uni ND socks 2 S-PACK 700 batteries

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

Rear mounted child bike seat providing comfort and style for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and footstraps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - The seat can be mounted and dismounted from the bike in seconds with the universal quick-release bracket, making it easy to switch between different bikes - Smooth, comfortable ride for your child due to the DualBeam suspension system that absorbs road shock - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and to keep dry - High quality metal lock that secures the child bike seat to your bike included

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

Chamois Butt'r starter pack Variety pack: - 2x Coconut: Non-greasy skin lubricant made with Organic Coconut Oil and Shea Butter - 6x Original: Non-greasy skin lubricant that easily washes off skin and clothing with soap and water - 2x Her: Made with aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil - 2x Eurostyle: Non-greasy skin lubricant with a traditional European cooling formula

Pack your gear and explore the backcountry with the OPSide 35L Backpack. Sized for day tours, the layout includes dedicated storage for your shovel and probe plus room for extra layers. The zip back panel allows easy access to the main body, and three internal pockets keep small items easy to find. Two waist belt pockets and a dedicated goggle pocket offer quick access to high-use gear. A removable waist belt transitions the pack to everyday use. Dedicated Avalanche Tool Storage A separate pocket keeps a shovel and probe at the ready and the main compartment clear for other storage needs Ski and Board Compatible External straps offer A-frame or centered carry options for skis and snowboard Easy Access Zip back panel offers easy access to the full inside of the pack Magnetic Opening Magnetic closure system allows for easy open and close with gloved hands Recycled Materials Bag construction features recycled polyester throughout

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included disc brake-compatible rear rack.

Access the world beyond groomed tracks with the OTX Adventure BC. Featuring a supportive 3-D Cuff and a powerful BC system sole for increased control in terrain and deeper snows. Comfort Guard insulation and the high integrated gaiter provide warmth and weather protection for cold and deep snow conditions. Comfort Guard for warm feet Inside the boot, a light, thin layer of water-repellent insulation material offers additional thermal protection in the forefoot and toe area to keep the skiers warm as they glide through the snow. - Sole: Rottefella BC - Sole Flex: Medium - Weight: 682g Technologies: Comfort Guard Very lightweight, water-repelling insulation material for additional thermal protection in the forefoot and toe area. Easy Entry Loops Practical entry loops and wide-opening designs guarantee that boots can be put on/taken off comfortably. Fischer Fresh Fischer Fresh puts an end to unpleasant odors, giving you lasting freshness inside the cross country skiing boot with a pleasant smell and feeling inside. Fischer Speed Lock New, revolutionary quick lock with minimum size and weight. Simply pull the laces tight, that's it! The system is safe and reliable. Hinged Polymer Cuff Ergonomic molded cuff for remarkable side hold with good freedom of movement to the front and back. Easy to adjust with Velcro fastener. Canting and EVA padding depending on model. Injected Exterior Heel Cap Good heel cradling and robust protection all in one: exterior heel cap for even better power transfer. Integrated Gaiter Integrated, easily adjustable gaiter for optimum protection in deep snow. Waterproof lightweight material and sealed zip for maximum cross country skiing enjoyment even in untracked terrain. Lace Cover Lace covers for additional protection against the snow and wet conditions and to give you a comfortable warm feeling. Rottefella BC Sole Optimum support in difficult terrain. Reliable walking thanks to non-slip profile. Sealed Zipper The specially sealed zipper system ensures that any moisture is kept out. Sport Fit Concept The right fit for all requirements. Whether it's shaped for the female foot with the comfort or race version, customized for the feet of young skiers, meeting the comfort requirements of all-rounders or for direct power transfer in racing: the Boot Fit Concept with special lasts is the answer to all the different needs and morphologies of the various consumer groups. Thermo Fit Thermally formable foam cushioning with outstanding thermal insulation – a perfect fit for the individual shape of the foot. Heat boot to max. 85°C (185°F) in oven. Step in with socks and tighten laces. Foam adapts automatically. Allow 7-10 min of cooling time. Velcro Strap Fastening element for cuffs and instep straps, easy to handle and adjust.

Give your little one a comfortable seat where they can enjoy the view as you pedal them around town. A 3-point safety harness with protective chest pad keeps them secure over bumps and through turns and an adjustable headrest allows for helmet clearance. The carrier mounts on an included alloy rear rack and has a quick release feature for easy on and off. - Quick release - Mounts on included alloy rear rack - Adjustable headrest for helmet clearance - Durable hi-impact polypropylene structure - Soft, washable, shock-absorbing seat pad - 3-point safety harness with protective chest pad - Two convenient in-seat storage compartments - Adjustable footrests w/straps - Grab bar w/padded grips - 40 lb weight limit - Brake Compatibility: Disc

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included rack.

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

Make ride time family time with Sunlite's Deluxe Child Carrier. It attaches to a sturdy aluminum rack and cradles your most precious cargo with a durable, high-impact plastic structure. Your bundle of joy rides in complete comfort with a 3-point safety harness with protective chest pad, adjustable foot wells with straps, a grab bar with padded grips and a head rest. And it's got real-world details like 2 in-seat storage compartments and a washable, padded seat for junior.

A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. The SK-4 includes: - AWS-10 Fold-Up Hex Wrench Set - BBB-4 Big Blue Book of Bicycle Repair - CC-3.2 Chain Checker - CN-10 Professional Cable and Housing Cutter - CT-5 Mini ChainBrute Chain Tool - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HR-8 8mm Hex Wrench - MLP-1.2 Master Link Pliers - SD-2 Shop Screwdriver: #2 Phillips - SW-7.2 Triple Spoke Wrench - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench

Smart and functional child bike seat with a personality, designed for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and footstraps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - Easy mounting of the child bike seat on your bike – compatible with most bike models - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Comfortable handlebar for your child's hands during the ride - Water-repellent materials make the seat easy to clean and to keep dry - High quality metal lock that secures the child bike seat to your bike included - Designed and tested for children from 9 months* to 3 years old, up to 33 lbs/15 kg.(*Consult a pediatrician for children under 1 year old.)

Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes. DETAILS Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. OTHER PRACTICAL FEATURES: - Our reflector ensures added visibility and safety - A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.

Finding your rhythm can make or break your race. Our Control SL seat post puts you in an ideal position for high-output efforts and is easily adjusted thanks to the 2-bolt system letting you easily make micro-alignments for that dialed attack position—all while remaining feather light at 180g for XC riding and racing. Its 30.9mm post diameter and 415mm length make the Control SL seat post a perfect match for the modern XC bike. Once your riding position is set, you’re focus is dialed on ride fast and efficiently —not your seat post. - Material: High-modulus carbon fiber - Length: 415mm - Offset: 0mm - Post Diameter: 30.9mm - Seat Clamp: 2-bolt Micro Adjust with 46mm saddle rail cradle, Compatible with carbon and alloy saddle rails - Bolts: Titanium - Weight: 180g - System Weight Limit: 275lbs / 125kg

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

A Weather-Tight Hydration Pack For Unpredictable Adventures Adventure riding is synonymous with mixed weather and unknown trail conditions. The Seeker 10L Bike Hydration pack offers the weatherproof storage to take on winter rides and unknown spring weather. It has all the bike-centric features you expect in a Dakine pack including helmet carry straps, a breathable back panel and dedicated storage for sunglasses. - Limited Lifetime Warranty - 3L / 100oz Hydrapak lumbar reservoir with quick disconnect - High-flow Blaster bite valve with shut-off and magnetic hose clip - Lightweight, weather-tight construction - AirLite Suspension backpanel - Breathable ergonomic shoulder straps with sunglasses quick stash - Zippered hipbelt pockets - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable helmet carry - External carry straps - Reflective logo

Extend your ride with the Garmin Charge power pack. This external battery pack plugs directly in to the Edge 1030 cycling computer, giving you up to 24 hours of additional battery life. It even fits into the new streamlined bike mount. You can charge on the go by connecting the Garmin Charge power pack to any compatible fitness device with an additional cable — including wearables and other cycling computers. Just connect the power pack with a USB charging cable so you can stay in the action and get the most out of your activities. - Bike mount sold separately or included with the purchase of Edge 1030 - Wearables with wrist-based heart rate that use a plug-based charger cannot be worn while charging

Pack the essentials and explore beyond the gates with the OPSide 25L Backpack. Sized for short tours and quick hits outside the resort, the layout includes dedicated storage for your shovel and probe. A zip back panel offers easy access to the main body, while three internal pockets keep small items easy to find. Two waist belt pockets and a dedicated goggle pocket allow quick access to high-use gear. A removable waist belt transitions the pack to everyday use. Dedicated Avalanche Tool Storage: - A separate pocket keeps a shovel and probe at the ready and the main compartment clear for other storage needs Ski and Board Compatible: - External straps offer A-frame or centered carry options for skis and snowboard Easy Access: - Zip back panel offers easy access to the full inside of the pack Magnetic Opening: - Magnetic closure system allows for easy open and close with gloved hands Recycled Materials: - Bag construction features recycled polyester throughout Specifications: - Weight: 1200g Capacity: - Volume: 25L - Dimensions: H550*W270*P175mm Materials: - External fabrics: Polyester 900D Recycled - Internal fabrics: Polyester 200D Advantages: - Opening: Back & Head On - Carrying system: Back Pack - Braces: Padded Braces - Others: Waist Belt + Chest Strap Storage: - Pocket number(s): 4 - Accessory Pocket: Goggle Fleece Pocket & Safety Pocket - Hydration System: Compatible - Other dedicated pockets: Safety Compartments - Ski carrying: Side - Snowboard carrying: Vertical Technologies: Magnetic Opening System: - The bag has a magnetic opening system with modern integration for easy use. Back Zip: - Easy access to main compartment from back of pack. Hydration System Compatibility: - Compatible with hydration system Ergonomic Back & Shoulder: - Ergonomic and ventilated back panel & shoulders to maximize comfort. Ski & Snowboard Carrying: - Allows lateral & frontal ski, snowboard & poles carrying Removable Belt: - The backpacks have removable belt to be used on snow for free-ride and touring trips, as well as everyday to transport urban stuff. Dedicated Safety Pocket: - Our free-ride backpack has a dedicated safety pocket, on the front, very easily accessible to be able to take our the probe & shovel as quickly as possible.

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

For the family on the go, quickly snap this rear frame-mounted child bike seat into place and get on your way! Lightweight and easy to use, it turns virtually any bike into a fun family-hauler. Adventure is accessible and fun with the Dash FM. A closer-to-the-child experience, along with its small footprint, make for an easy tandem ride. Built to last with solid construction and plush washable padding, this child bike seat is a winner. Clear your schedule and say “yes” to more exploring by bike. Features - Frame Mount connection quickly and easily installs on round and oval bike frame tubing - Adjustable seat moves backward and forward 3 positions for optimal spacing between child and rider - Removable and hand-washable seat and harness padding for easy cleaning - Adjustable 5-point harness system to accommodate growing children up to 40lbs - Rear storage compartment for smaller items - Lightweight design for an easier ride - Arm rests for rider comfort - Adjustable footrests easily snap into four positions, and include integrated security straps - Water-resistant seat padding - Integrated rear reflector for added visibility - Safety strap for added security - Meets ASTM & EN regulatory standards Specs - Seat Weight: 7.5lbs / 3.4kg - Total Weight: 8.7lbs / 3.9kg (with frame mounting block) - Maximum Nominal Load: 40lbs / 18kg, one child + cargo - Minimum Age of Child: 12 months

The Dash FM Extended Rails is compatible with smaller bike frames and offers larger tire clearance for extra versatility. Lightweight and easy to switch from bike to bike, the Dash FM Extended Rails features comfortable armrests, adjustable footrests, and washable padding. This versatile and convenient bike seat will help you get outside with the ones you love. - Frame Mount connection quickly and easily installs on round and oval bike frame tubing - Adjustable seat moves backward and forward 3-positions for optimal spacing between child and rider - Removable and hand-washable seat and harness padding for easy cleaning - Adjustable 5-point harness system to accommodate growing children up to 40 lbs - Rear storage compartment for smaller items - Lightweight design for an easier ride - Arm rests for rider comfort - Adjustable footrests easily snap into four positions, and include integrated security straps - Water resistant seat padding - Integrated rear reflector for added visibility - Safety strap for added security - Meets ASTM & EN regulatory standards Specifications: - Seat Weight (lbs/kg): 7.5 / 3.4 - Total Weight (lbs/kg): 8.7 / 3.9 (with frame mounting block) - Seat Dimensions (in/cm): 22.4×15.7×27.2 / 61.5×39.9×69.1 - Maximum Child Weight (lbs/kg): 40 / 18 - Maximum Rear Storage Compartment Weight (lbs/kg): 2.2 / 1.0 - Maximum Nominal Load (lbs/kg): 40 / 18, one child + cargo - Minimum Age of Child: 12 months – if child is younger than 12 months, consult a pediatrician - Maximum Age of Child: 5 years – regardless of age, child must not exceed weight limit

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness and dual safety latches that lock the seat to the rack (sold separately).

The 37-piece SBS-3 from Park Tool is a comprehensive, shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs. The SBS-3 also includes flat-faced sockets in common sizes for work on suspension forks. Ideal for use with Park Tool torque wrenches, the 3/8" drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability.

Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful! - Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

Make ride time, family time with Sunlite's Child Carrier. It attaches to a sturdy steel rack (included) and cradles your most precious cargo with a durable, high-impact plastic structure. Your bundle of joy rides in complete comfort with a 3-point safety harness with protective chest pad, foot wells with straps, and a grab bar with padded grips. And it's got real-world details like 2 in-seat storage compartments and a washable, padded seat for junior.

The multifunctional Urban Back-Roller is an ideal single bag for bike riders who are looking for a spacious, waterproof bike bag to accompany them on their way to work or school. Made of a special blend of Cordura fabrics, the bag has a textile appearance that is a perfect match for both casual and business attire. Thanks to a polyurethane coating on the inside, it is nonetheless absolutely waterproof. The practical QL mounting system enables you to quickly and conveniently attach the bag to your bike rack. The bag's internal pocket, consisting of a main compartment and a zippered mesh compartment helps you to keep things orderly and immediately accessible. A detachable shoulder strap allows you to comfortably carry the Urban Back-Roller once you set off on foot. - Classical rear pannier (single) with roll closure - Sturdy soft-touch PU-laminated Cordura blend - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Integrated inner pocket and shoulder strap - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Ideal for shopping, sports, picnic etc. - Two highly reflective 3M Scotchlite reflectors - Can be easily cleaned inside

The Apex Rechargeable takes the durability and power of the original Princeton Tec powerhouse Apex headlamp and offers an option to cut down on battery cost and waste. The waterproof Apex Rechargeable provides either a powerful spot beam or a bright flood with two big buttons that make switching between modes easy and offers upwards of 13 hours of runtime. The rechargeable lithium ion battery pack comes clipped to the head strap and can be moved to your belt or pack with an extended power cable. A USB charging cable comes with the headlamp, making it easy to replenish the Apex Rechargeable's battery power. FEATURES Rechargeable battery Battery pack bracket USB charging cable Extension cable Nylon headstrap + crown strap Velcro loop strap SPECS POWER: 550 Lumens 1 Maxbright LED (regulated)4 Ultrabright LEDs (regulated) BURN TIME: 13 hours BATTERIES: Rechargeable Lithium Ion WEIGHT: 10oz / 283g WATER RESISTANT: IPX7 WARRANTY: Lifetime