Your Search: "waxing service"

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. - HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations

Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. - HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations

Service parts for Fox suspension.

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.155 TLG, 7.875 X 2.25/2.00

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.464 TLG, 230/205X 65/60

34 Rhythm Air Shaft Assembly for Fox suspension fork service and repair.

FSA Service Parts for BB30 Frames

FSA Service Parts for BB30 Frames

FSA Service Parts for BB30 Frames

White 80gm HS-0 (Below 8F): Extremely hard, cold weather wax best suited for fresh or wind-blown snow near or below zero. Apply with caution as a very hot iron is needed. Popular with many racing teams in the upper Midwest for mid-winter races. Teal 80gm HS-10 (-5F-15F) "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Applies easier than extreme white. Comparable to Swix CH5X. Also available in 500g bulk bars. Blue 80gm HS-20 (12F-28F) Fast Wax Blue is one of our more popular choices. Makes a good "universal" glider for waxers looking for a simple set-up Comparable to Swix CH6X. Also available in 500g bulk bars. Red 80gm HS-30 (22F-32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. 500g bar available for high-volume waxers. Yellow 80gm HS-40 (30F-50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.

Teal 500g HS-10 (-5F to 15F): 500g bulk bar is ideal for families, teams or skiers using large quantities of wax. "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Great wax for economically and effectively hardening ski bases for cold weather, and applies easier than extreme white. Comparable to Swix CH5X. Blue 500g HS-20 (12F to 28F): Bulk bar for high-volume waxing; high school teams take note! Fast Wax Blue is one of our more popular choices as a "universal" glider for waxers looking for a simple set-up and for hardening bases as an underway for a harder HF. Comparable to Swix CH6X. Red 500g HS-30 (22F to 32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. Yellow 500g HS-40 (30F to 50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.

The majority of bicycle maintenance is detail work, and our precision 3-piece Screwdriver Set is an ideal companion for bike shops, home mechanics and race-day service. Ergonomic file tread grips promote control and comfort – preventing hand fatigue. Plus, magnetic tips are precision machined to exceed both JIS and ISO standards and fit perfectly in component and accessory fasteners. This 3-piece set comes complete with #0 and #2 Phillips, 6.5mm flathead, and a Shimano crank cap tool. Available as a set, or found in our Team Edition Tool Kit. - Hardened CRV tool steel ensures longevity of precision tips - Phillips #0 exceeds ISO standards – designed for small components and frame fittings - Phillips #2 exceeds JIS and ISO standards for derailleur-specific fittings - 6.5mm flathead exceeds ISO standards and serves countless service procedures - Shimano crank cap tool rests on the handle end of the #0 Phillips - Magnetic tips help hold screws flush and in place during complex procedures - Ergonomic file tread grips promote precision and control and prevent hand fatigue - Available in our Team Edition Tool Kit

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Best Fit Form Skier Profiles Profile: 3-5 *Does not include bindings. Be sure to order bindings if needed. The TS Carbon Pro features a shorter and wider skin profile designed to provide a secure kick while maintaining high-level glide. Constructed using Cold Base Bonding technology, the base provides better waxing and grindability to maximize speed. FEATURES -100% mohair skin for maximum glide -Twin Skin strips offer solid grip -Lightweight Air Core Carbon construction -Cold Base Bonding -Finish First -Prewaxed -Precision Pairing System -Computer Flex Control -Fischer Carbon Fiber -Twin Skin **Don’t worry about equipment sizing – If you're not sure which size to order, choose your best guess and fill out our Best Fit Form. You will be contacted if there are any questions.

Best Fit Form Skier Profiles Profile: 3-5 *Does not include bindings. Be sure to order bindings if needed. New Moon Staff: A true race ski with the convenience of skin grip. Easy to train on in pine needles, oak leaves, etc. As light as the famous RCS, this Fischer is easy to kick and glides fast. IFP plates allow adjustable bindings to fine tune grip/glide ratio. From the Manufacturer: Twin Skin Carbon Pro: The latest addition to the Twin Skin race family features a shorter and wider skin profile designed to provide a secure kick while maintaining a quality glide. Constructed using Cold Base Bonding technology, the base provides better waxing and grindability to maximize speed. **Don’t worry about equipment sizing – If you're not sure which size to order, choose your best guess and fill out our Best Fit Form. You will be contacted if there are any questions. FEATURES -Air Core Carbon -CFC - Computer Flex Control -Classic 902 -Cold Base Bonding -DTG World Cup Plus -FCF - Fischer Carbon Fiber -Finish First -Precision Pairing System SPECS -Weight Per Ski - 1.080g/197cm -Base/Climbing Zone - World Cup Plus/Twin Skin Mohair

Giant's Speedshield Race fenders are a simple, lightweight way to fend off muck and grime. The clip-on, quick release attachment system is fast and secure. When it starts to rain, snap them on, and when the sun starts to shine they come off just as easily. High-strength plastic gives years of reliable service.

Giant's Speedshield Tour fenders are a simple, lightweight way to fend off muck and grime. The clip-on, quick release attachment system is fast and secure. When it starts to rain, snap them on, and when the sun starts to shine they come off just as easily. High-strength plastic gives years of reliable service.

Giant's Speedshield fenders are a simple, lightweight way to fend off muck and grime. All-weather polycarbonate construction offers years of reliable service, and the adjustable stainless steel hardware is stable and easy to install.

Giant's Speedshield Alloy Tour fenders are a simple, lightweight way to fend off muck and grime. Unbreakable, all-weather aluminum construction offers years of reliable service, and the adjustable stainless steel hardware is stable and easy to install.

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

Rebuild kit for Hayes hydraulic disc brakes. - Include pistons, seals, and other parts necessary for service.

KS Dropper Post Service Parts

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.