Ski Wax

NON FLUORO N-Kinetic Liquid Warm (24.8 -33.8F) XC race top coating for mild temperatures. At its best when the snow humidity is less than 30% (From dry to moist snow). New Moon's testing shows excellent results in high humidities as well. In optimal conditions, makes your skis faster than powders. Apply onto a waxed and brushed ski and let dry for 30 minutes in room temperature. N-Kinetic Liquid Cold (-4..24.8F) XC race top coating for cold temperatures. At its best when the snow humidity is less than 30% (From dry to moist snow). New Moon's testing shows excellent results in high humidities as well. In optimal conditions, makes your skis faster than powders. Apply onto a waxed and brushed ski and let dry for 30 minutes in room temperature.

SPECIAL GREEN (5F to 14F) Rode Special Green hard wax (grip wax) for 5F to 14 F. If you're looking for fast, this is it. Can mix this with Green to soften it up and when just a bit more kick might be nice. GREEN (14F to 25F) Rode Green hard wax (grip wax) for 14F to 25 F. Best for low humidities in new and untransformed snow. MULTIGRADE BLUE (20 to 28F) Rode Multigrade Blue hard wax (grip wax) for 20F to 28F. Best in new and untransformed snow. AWESOME wax for SPEED in the teens! BLUE (21F to 28F) Rode Blue hard wax (kick wax) for snow temps 28F to 21F. Very reliable grip in new and untransformed snow within its temperature range. SUPER BLUE (27F to 30F) Rode Super Blue hard wax (grip wax) for snow temps 27F to 30F. Excellent in new and untransformed snow. If you don't have this one, GET IT! MUST HAVE! SUPER EXTRA BLUE (23F to 30F) Rode Super Extra Blue hard wax (grip wax) for fresh and untransformed snow. Snow temps 23 to 30 F. Use when humidity is above 40% as a complement to Super Blue which is used for lower humidity. MULTIGRADE VIOLET (29F to 32F) Rode Multigrade Violet hard wax (grip wax) for 29 to 32 F. Can be used much colder in higher humidity and moisture content. If you have one wax in your pocket, pray it's this one! This is the gateway drug of Rode waxes...you try this one and then HAVE TO HAVE the rest of the line! VIOLET (around 32F) Rode Violet hard wax (grip wax) for 32 F (0 C). Don't leave home without this wax! Thinking about zeroes? Everything else super slow? Try this before you make the final call. VIOLET EXTRA (32F to 34F) Rode Violet Extra hard wax (grip wax) for 32 to 34 F. Another one to try when you're searching for something other than waxless skis! RED EXTRA (30F to 34F) Rode Red Extra hard wax for 30 to 34 F, which can be great new humid snow that isn't glazing or drying out. RED (32F to 36F) Rode Red hard wax (grip wax) for 32 to 36 F. Can be good in fresh, humid snow that isn't glazing. YELLOW (34F to 39F) Rode Yellow Gialla hard wax (grip wax) for 34 to 39 F. Gialla is THE wax to try in the Rode line when trying to decide on wax for zeroes. Think 2016 Birkie...when the snow is wet and glazing... this could be your miracle wax! SUPER WEISS Temp Range: (25F-30F) -1°...-4°C / -3°...-7°C For old non-transformed snow or not too compact.

Time-proven base klister. Extremely durable. Apply with torch or heat gun to aide in application.

A hard and extra durable glide wax with additive for long distance racing. This block top coat is great in warmer conditions, but often competitive also in colder weather. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. Iron temperature 155°C/311°F. Marathon waxes can be used as a race wax alone or as a base for powders and other top coats.

The TSB series are gliders for competition that work extremely well, and are highly durable, on dirty snow and in dry, high friction conditions. This is achieved thanks to the black solid lubricant additive that reduces friction and absorbs less dirt in contaminated snow. Its hardness makes it convenient to work and highly durable. TSB series can be used as a race wax alone or as a base for top coats. -TS5B - 0/14F is the hardest wax in the TSB line and is a great choice in cold conditions. Recommended iron temp.: 160°C (320°F) -TS6B - 10/21F is the second hardest wax in the TSB line and is a great choice in typical winter conditions. Recommended iron temp.: 155°C (311°F). -TS7B - 17/28F is a versatile wax suited for normal winter conditions below the freezing point. It has shown good properties on artificial snow in addition to natural, transformed older snow. Recommended iron temp: 150°C (302°F). -TS8B - 24/39F is made harder than the std TS8. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. Recommended iron temp: 150°C (302°F). -TS10B - 32/50F is made harder than the std. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. Recommended iron temp: 165°C (329°F). APPLICATION The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax.

Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.

Star's new Next Fluoro Free waxes offer world cup level glide using a completely fluoro free compound that's easy to apply and cures quickly. The enormous success of liquid paraffins with Dry Fast Technology has been combined with the use of new, and already successful additives used in the NEXT Powder line. To apply just shake the bottle, sponge a film of liquid onto your skis wait 1 minute for drying. You can then simply brush with a fine nylon brush. For maximum performance and durability Star recommends polishing with a wool roto-brush fleece. 100ml, sponge head for easy application while minimizing waste. For snow temperatures: Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 100G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

Our all new Start RG Racing Glider series are next generation, fluor0 free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphites additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. 5°...-15°C (5°/41°F) 55...100% Humidity

Kit containing all of the essentials for waxing Base Performance Liquid Paraffin. Contains 1 each of Base Performance Liquid Paraffin Yellow, Red, and Blue, a Base Performance Hot Wax Blue 120g, and a Yellow Liquid Paraffin Polishing Brush all in a high quality cordura zippered bag.

PFC Performance Hot wax for racing and practice sessions in all disciplines. Has a bonding agent for Top Finish products. Good sliding properties, durable and can be used as a base layer in races. This is the exact same product that is used and available at the World Cup and Olympic Games. The wax case is resealable. Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.

The all new Start RG Racing Glider series are next generation, fluor free, technoceramic gliders. Medium concentrate. Advanced mixtures of numerous ceramic compounds influence the nanostructure of the gliding surface to reduce both wet and dry friction with new levels of durability. Additionally, graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml LIQUID MOLYBDENUM 5°...-15°C (41°...5°F) 55...100% 80ml GRAPHITE 55...100% 80ml UNIVERSAL BASE

Green Base Klister Spray. Temperature range 5°F to 50F. Apply a thin layer. Use regular klister on top, adjusted to the conditions, or aerosol Quick Klister. Upside down spray applicator for controlled spray-on application. The Base klister is applied by holding the bottle upside down and move it slowly along the ski on both sides of the groove. Distance between the base and nozzle should be 4-5 cm. For Racing, Sport and Recreation.

Includes 120g size Base Performance Yellow, Red, and Blue hot wax. Also includes 100ml Express Pocket liquid wax. 3mm Plexiscraper, Nylon Brush, Express Tuner Kit, T8 Iron, and a medium Diamond File are also included. Comes in a nice kit bag. A $250 value!

Rub-on wax for all types of snow and temperatures. - Improves sliding properties and cares for the base - Polish in using the cork on the back of the package or TOKO Thermo Cork - Very convenient for waxing en route - Very convenient for the care of ski skins to prevent the formation or adhesion of ice - Also used as rust protection for ski edges

Ecological hydrocarbon hot wax for training sessions and taking care of ski and snowboard bases. Biodegradable Resealable wax case Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F

Fluoro Free. The newest test wax from Star. World Cup Performance wax.

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Individual Retail Value $77 -Rex Skin Care for repelling dirt and enhancing glide, this conditioner is applied directly to the skins. Safe for all brands of skis. Apply to the Rex Fiber Cloth and wipe the mohair clean. Leaves a protective treatment after drying. Hydrocarbon-free. 85ml -Rex Skin Cleaner for all skin skis. Safe for all manufacturers' mohair inserts. It is hydrocarbon-free and does not weaken the glue of the insert. Use before Rex Skin Care. 170ml -Rex Glide Cleaner cleans and conditions the base of your skis. Apply generously to cloth or Rex Fiber Cloth, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. --Rex Fiber Cloth for cleaning and polishing skis. 30ml roll.

Yellow NF11 (28F - 35F) New and old snow. The softest wax in the NF series. Compared to traditional waxes NF11 is a relatively hard and "dry" wax. Blue NF21 (17F - 28F) All types of snow. Rex's most slippery fluoride-free wax ever! New Snow NF21G (10F - 35F) Intended for new snow and containing a precisely optimized amount of graphite, NF21G completes Rex's NF series. Hardness is between NF11 yellow and NF21 blue. Green NF31 (-4F - 17F) All types of snow. Hard and durable for cold conditions. Melting point: approx. 140°C.

NEW Fluor free version of Glide Cleaner. Cleanses the base as well as Rex Remover, but without making the base turn gray and dry. Apply generously to cloth or fiberlene, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. After treatment, Rex Glide Cleaner leaves a very hard and thin layer of Rex UHW hard wax, that acts as an excellent binder for both liquid and solid paraffin waxes. Always start a new glide waxing by cleaning with Rex Glide Cleaner. It will make the attachment and durability of sequent wax layers considerably better. Glides well even on its own on dirty and artificial snow, that is usually found in ski tunnels.

Fluoro-Free. Rubbing on and corking out layers of hard grip waxes on your ski can be time consuming. Vauhti is making skiers lives easier with a Liquid GS Carrot grip wax. Based on the popular GS stick wax, a thin and smooth layer is easy to apply. No cork, no elbow grease, just let dry and go skiing. We do wonder about the potential oxymoron of a liquid hard wax, but we would rather go skiing than spend much time thinking about it. Carrot: Good in new or old snow conditions Temperature range of -2 to -20ºC (-4 to 28°F) Purple: Best on fine and fresh snow Temperature range of -1 to -7ºC (19 to 30°F)

Durable base binder for added durability. Base binders are essential for long outings or marathons. Apply to a clean kick zone by touching stick to a warm wax iron and then dabbing to the ski. Warm again on ski with iron and cork out to a smooth finish. Let cool before applying he wax of the day.

The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).

Swix TSP5 Turquoise -10 / -15 40g. (5ºF-14ºF) TSP5 is the hardest powder in the TSP line and is an excellent choice in cold conditions, both for cross-country and alpine. It is a favorite among servicemen due to its superior durability and dry friction properties. It is made as a powder to make it easier to apply, without compromising the sliding properties. For fresh snow, converted snow and artificial snow. TSP05 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C TSP6 is a very good powder for both alpine and cross country, which has shown great performance on artificial snow in addition to natural snow. TSP7 is a versatile powder suited for normal winter conditions below the freezing point. For fresh, old or man made snow. Good in clean snow. TSP7 can be used as a race powder alone or as a base for top coats. Swix TSP8 Red Fluoride Free Powder -4/4 40g (24.8ºF - 39.2ºF) TSP8 has a softness and unique formulation that makes it perfect on both sides of the freezing point. TSP8 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C. Swix TSP10 Yellow Fluoride Free Powder 40g (32ºF-50ºF) TSP10 is an excellent powder for wet conditions. Especially newer or transformed snow that gets wet for the first time. Despite being a fairly soft powder, the abrasion resistance is very good, and the powder handles long distances well. The speed of the grease gun should be approx. 8-10 sec. on an ice skate or alpine ski. It is important to have a good lubricating iron to get the powder to melt efficiently. TSP10 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C.

Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax

Equivalent to very high fluoro race wax but without any fluorocarbon, Vauhti Pure Race Liquids are high-performance glide waxes that offer performance to meet the highest requirements of a competition-oriented skier. PURE Race Liquids have high-quality hydrocarbon, zinc stearate and silicone waxes and provide optimal performance for new and natural snow. WARM NEW SNOW For warm new snow +7 to -3°C (45 to 27°F) 80ml bottle with sponge applicator Sponge on. Brush out after curing Completely free of fluorine but equivalent to high fluoro top coats COLD For cold new snow -2 to -20°C (28 to -4°F) 80ml bottle with sponge applicator Sponge on, let dry, brush Completely free of fluorine but equivalent to high fluoro top coats LDR OLD SNOW For wide temperature range and for variable conditions (14F - 41F) LDR NEW SNOW LDR glide wax is best when the conditions are expected to change or vary over a ski course For cold snow +5 to -10°C (41 to 14°F) 80ml bottle with sponge applicator Sponge on, let dry, brush Completely free of fluorine but equivalent to high fluoro top coats OLD SNOW WARM for damp snow (26F - 44F) OLD SNOW COLD For cold snow conditions (-4F - 28F)

With Fast Wax Graphite Additive, you can add graphite any ski wax. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little graphite to it. Save your money for Hot Coco! We have two versions of our Graphite Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. To use, simply remove any old wax from your ski base. Rub or Drip on some Fast Wax Cold or Warm Graphite Additive. About a drop every 2? should do. Then drip on the wax of the day. As you iron in both waxes, they will mix together and you will be ready for the trail. • Cold or warm wax mix with 4% Graphite load • 40 grams • Single Stick in clamshell • Cold -20F to 20F / Warm 20F-40F Graphite Stick Cold

Introducing the new HSX series of paste waxes from Fast Wax. Utilizing the base formula of our long running and famous HSP line of Fluoronated paste waxes. HSX utilizes an all new, environmentally friendly (Green) speed additive. Still easy to use, still the best value in paste wax, and still faster than fast! Just wipe it on and go. No iron needed, no scraping, no mess. For longer lasting speed, buff in with the Speed Block and brush-out. HSX – All temp paste wax and ski conditioner. HSX 10 – 5° to 15° F Race level performance when the weather gets cold and nasty. HSX 20 – 12° to 30° F Our all time best selling HSP product. Excellent performance for the most common winter temps. HSX 30 – 22° F to 38° F Perfect temps for our Fluoro replacement technology to really kick into gear. HSX 40 – 32° F to 50° F Its hot hot hot out! The product with the highest concentration of our new fluoro replacement.

• Soy wax blend with plant-based Fluorocarbon alternatives • 25 grams of paste wax • Applicator included • Temperature Range 28F-40F • 7-10 K durability • Smells like cinnamon

Snow a little dirty or a bit dry? With Fast Wax Molybdenum additive, you can add Moly to any ski wax and add some speed to your skis. No need to purchase a whole new set of waxes. Use the waxes you already have and add as much or as little moly to it. Save your money for $14 hamburgers! Fast Wax has two version of our Moly Additive wax, cold and warm. Depending on the conditions choose one that fits the temp range you will be skiing in. The Warm Version is for temps 10 to 40F. To use, simply remove any old wax from your ski base. Drip on some Fast Wax Cold or Warm Moly Additive. About a drop every 2? will do. Then drip on the wax of the day. As you iron in both waxes, they will mix together, and you will be ready for the trail or mountain. Moly will help keep your base clean by reducing electrostatic friction, aka “static cling”. With a reduction in electrostatic build up on the bottom of the ski, you will encounter a serious reduction in environmental friction from dirt, bark, or other contaminates you find on the trail. When does one use a Molybdenum Additive? When the snow is fine-grained the temperatures are cold, humidity is low and the air is dry. A wax with a Molybdenum Additive will enhance the static-reducing benefits of a graphite ski base. Why buy a whole line of Moly based waxes when you can use Fast Wax Moly stick to make any wax a moly wax? . Molybdenum wax Additive • Cold or warm wax mix with 4% Moly load • 40 grams • Single Stick in clamshell • Cold -20?-10? / Warm 10?-40?

NEW PFC FREE Toko 125 ML Liquid Paraffin Wax. Where high performance meets convenience! Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: Hard liquid wax for snow temperatures -22/14 °F, air temp -22/16 °F. 0-60% relative humidity. Red: Medium hard liquid wax for snow temperatures 10/25°F, air temp 12/28 °F. 40-80% relative humidity. Yellow: Soft liquid wax for snow temperatures 21/32 °F, air temp 25/50 °F. 80-100% relative humidity. -Wide application range for common conditions in the medium snow temperature range. -Very long-lasting wax adhesion. -Can also be used as adhesion promoter for top finish products. -Fast processing. -For brushing/polishing use the Polishing Brush Liquid Paraffin

Performance racing paste wax for all snow types and conditions, fluoro free

Clear out your wax box and replace all your binders with Vauhti GS Base Super. The only binder you will ever need, GS Base Super has superior durability and glide properties in all snow conditions.

The KX klisters are durable klisters custom-made for different conditions.

Toko 100 ML Liquid Paraffin Wax - All the convenience of liquid application for training and racing. Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: for snow temperatures 18F/-22F 0-60% relative humidity. Red: for snow temperatures 28F/11F 40-80% relative humidity. Yellow: for snow temperatures 32F/25F 80-100% relative humidity.

RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml

One of the few truly universal waxes available. It is able to glide in cold temperatures and kick when the snow warms up. This wax outperforms other klisters in fresh snow conditions while simultaneously is able to kick in transformed ice crystals. In racing, this wax can be used as a mix with another klister, or under a cover wax. The versatility of this mix is in part due to its composition of klister raw materials, terva(tar), and aluminum. The aluminum additive prevents the formation of ice around freezing, when snow is in transition between solid and liquid state. The special ingredient is the terva which enables the wax to kick in warm conditions and remain fast on cold snow. The tar that is used in Uni Wide is created through the dry distillation of Finnish pine trees. What remains is a unqiue thermoplastic that transforms with changes in temperature. In a thin application, the tar hardens and creates a shell to protect from fresh ice crystals. In a thick application, the tar acts as a cusion layer to provide kick on rounded and transformed ice crystals. Application: Begin with a thin application of base klister or base klister spray. Then apply Universal Klister in a chevron pattern along the kick zone of your ski. Tech tip: apply a thin layer for fresh snow conditions, and a thicker layer for transformed snow conditions. Rub in an even layer with your thumb or synthetic cork. When racing, allow the skis to sit base down on the snow for a brief period of time to allow the hard shell to form, remove any excess snow sticking to the base and go ski.

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F - Cold & Aggressive Snow Conditions Universal: 3/32F, air temp. 3/36F - Wide range of use in medium snow temperature conditions Warm: 25/32F, air temp. 25/50 - High moisture and wet snow conditions

MountainFlow's race wax delivers exceptional speed and durability while also being eco-friendly and biodegradable. Made with mountainFLOW's exclusive Ceramic Nanotechnology Plant-Based + Non-Fluoro. Rigorously tested and just as fast as any non-fluoro race wax.

Kit containing 1 each of Base Green Binder, Yellow, Red, and Blue, a plasto cork, and a multipurpose scraper all in a high quality cordura zippered bag.

All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Ultra Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F)

60ML -Base -Gold 19F to 34F -Red 32F to 50F Same durable Klister wax as Rex’s traditional line, now in a liquid form. Allows a quick and thin application. Can be applied with minimal heating at room temps. Excellent base for hard waxes in mixed or abrasive conditions. For fully transformed conditions where a thick layer is needed use traditional tube klister.

Rex G-series spray gliders are special fluoro-free versions of our most advanced HF gliders. They feature all the technology advantages of Rex HF-series, without the use of fluoro compounds. Approved for use in junior racing in countries where fluorinated waxes are prohibited. In low moisture and artificial snow, the performance is almost on par with HF series, with similar durability. G-series gliders are great waxes for fast training and junior racing. Likewise to our HF Sprays, they are the most wax-containing liquid gliders on the market and do not need hot waxing to support their durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. G41 – Taking a step ahead and breaking the boundaries set by hot waxing! The new G41 Spray is not limited by the requirements set by hot waxing and scraping. The Special UHW wax is only possible to apply in liquid form. Being the hardest glide wax on the market, it gives unseen performance on artificial and coarse snow, and also on cold dry snow. 435 G41 UHW Pink/Green +5…-20°C Rex G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial 439 G21G "New Snow" Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology.. Never has Rex non-fluorinated glide wax been this fast! 437 G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast! 436 G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast!

New from Rex. Based on Gold Klister, this new molybdenum Racing Service klister is especially good on dirty and coarse snow. It is a bit softer for extra grip. The added molybdenum improves its glide properties and decreases the attachment of dirt on old and coarse snow. Temperature range: 23/39°F (-5/4°C)

MountainFlow's Quick Wax is easy to apply and works great in all conditions. PLANT-BASED: mountainFLOW wax is made from 100% plant-based ingredients. 0% PETROLEUM: Most wax is made from petroleum and anything that is applied to skis/snowboard enters directly into the environment. WICKED FAST: Performs as well as a conventional (petroleum-based) ski wax - we’ve run controlled performance tests to prove it! BIODEGRADABLE + NON-TOXIC: mountainFLOW is safe for both the user and the environment EASY TO APPLY: Simply rub into base and buff with cloth. Comes with applicator pad.

MULTIGRADE (21F to 42F) This one is killer in coarse snow and when the tracks are falling apart. If you're building a klister collection, this better be in there! SPECIAL BLUE (10F to 25F) This one isn't as tough as Chola, but other waxes bond to it more easily so you can also cover it with hard wax in cold, abrasive new snow. BLUE (23F to 32F) When the track is thawed and refrozen. This is for the blazing fast hold-on-to-your-hats type of days! Don't be afraid of klister! Imagine rollerski kick with melt-your face speed! That is what spring skiing is all about. VIOLET SPECIAL (23F to 30F) This is the ticket as a binder for cold snow under blue hardwax! VIOLET (27F to 32F) This is the ticket as a binder for cold snow under blue hardwax! RED (28F to 39F) This needs to be in your box, as you'll want to try mixing it with other waxes to increase speed and prevent icing. SPECIAL RED (32F to 37F) Great for wet snow or mixing to prevent icing and speed up other waxes. SILVER (31F to 34F) Mix this stuff in where the snow is dirty to maintain speed and prevent icing. SILVER EXTRA (32F to 39F) For very dirty snow. UNIVERSAL (32F)

Liquid glide waxes will always perform better if a base preparation is done with an ironed-in paraffin or the use of a liquid base primer. Liquid Pure One base wax contains high quality polyethylene waxes and totally new additives makes a hard, dirt-resistant and wear-resistant coating on the ski base.

PFC Free High performance racing hot wax to meet the highest demands. This is the same exact wax used at World Cup and Olympic events. Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F Universal: 3/32F, air temp. 3/36F Warm: 25/32F, air temp. 25/50 -Optimal sliding properties -Unmatched durability -Best bonding agent for Top Finish products -Resealable wax case

The Racing eXtra Liquid (RXL) glider line is the evolution of the Racing Liquid line (RL), which had huge success when introduced in 2020. Thanks to the use of special fluor-free additives, the RXL line takes performance to a new level with increased speed and durability. The RXL line gives extra acceleration, extra water- and dirt-repellence, as well as extra abrasion resistance. It has a very wide range of use as it is suitable for all types of snow: natural or artificial, new or old. These waxes are durable and fast out of the gate. Simple to use and a sponge applicator is included for easily spreading the product. This sponge also stays saturated maximizing the use of the bottle. Non aerosol. Rode is one of the very few companies using an aluminum bottle for decreased plastic waste. For increased speed and durability use the Rode Wool Roto. 80ml bottles will do between 20-35 pairs of skis. All temperatures listed are snow temperatures. ****Tech Tip- Put on the night before skiing and buff with Rode Wool Roto Buffer and then brush out with nylon or horsehair aggressively the next day for increased initial speed and durability.**** Racing eXtra Liquid Cold -5C to -15C (5F to 23F). Really good in newer cold snow and at lower humidity. This wax can really fly in the right conditions. Racing eXtra Liquid Med -2C to -7C (19F to 28F). This one is a monster. If we were to recommend one liquid wax to have it would be RLM. Good in a variety of snow types and in the key temp range of the 20s This won about 70% of our fluoro free wax tests last year. We simply cannot say enough about this wax. Racing eXtra Liquid Warm -3C to 0C (26F to 32F) RLW is a versatile warm solution especially when the humidity remains below 50%.

Our all new Start RG Ultra Racing Glider series are next generation, fluor free, technoceramic gliders. High Concentrate. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally, graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml

Designed as a base prep for durability over long distances in cold, dry, abrasive snow conditions. Temp range: -5/-20°C or -4F/23F

Kit containing a T18 Iron and one each of World Cup High Performance Hot Wax 120g Warm, Universal, and Cold

SG GREEN (-13F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow. Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG PURPLE (18F to 28F): A great basic glider for training and racing when humidity is <55%. SG red (27F to 45F): A great basic glider for training and racing when humidity is <55%.

Universal silver klister for recreational and racing skiers. Gives a great kick. K21S UNI SILVER KLISTER 3C TO -5C (23°F to 38°F) K22 UNI VM KLISTER -3C TO 10C (27°F to 50°F)

120g Base Performance Yellow/ Red/ and Blue/ a nylon brush/ and a 3mm plexiscraper all in a nice kit bag!

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

The HS series are great gliders for training and competition with very good glide properties. HS6 LIQ. BLUE, 10º/24.8F 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. Especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. Replaces CH6XL. HS7 LIQ. VIOLET, 19ºF/28F°, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. Replaces the CH7XL. HS8 LIQ. RED, 24.8ºF/39.2ºF 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. Replaces the CH8XL HS10 LIQ. YELLOW, 35.6ºF/50°F, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as HS10L collect less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. Replaces the CH10XL DANGER H-sentence number: H222, H229, H319, H336 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Fast Wax - Training Wax 80gm Base Prep

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F