Your Search: "waxing service"

Keep your waxes off the floor of your car and where they belong! Toko's all-new soft-sided wax case is the perfect solution for organized, efficient travel with your waxing supplies. The padded, main compartment protects your waxing iron from drops and impacts. Any size wax iron with its own iron cozy built-in. Its large, upper storage compartment includes two secure plastic bins for messy wax or klister. Two side zip pockets easily accommodate brushes, tools, and other accessories. Use with carry handle or the included shoulder strap.

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

A package of three Rex brushes - Nylon, Horsehair and Steel. You get all three and save $35! Rex Steel Brush - Our most popular tool with the techs. Great all around brush. Stainless steel brush is used to open up the base structure during waxing. The stainless steel brush is the most effective at removing wax. Rex Horsehair Brush - Used for opening up the base strucure after scraping off most hot wax, before finishing with a nylon brush. Like brass brush, horsehair brush is also more abrasive than a nylon brush. Rex Nylon Brush - Essential tool for waxers. Always finish glide waxing with a nylon brush.

Rex's well-known and trusted basic grip wax line contains some classics, which have been in production for over 50 years! Universal Tar: -1/-25°C (-13/30°F) Excellent wax for skiers who are looking for simplicity in their waxing, as well as for racing skiers. Despite it’s "Universal" name it's a fully proven race wax, especially at mild frosts 18/30°F (-1/-8°C). Light Green: -8/-15°C (5/18°F) The most popular Rex wax for cold conditions. On new snow provides a good grip at around -6°C. Use it in race waxing as a coating for softer waxes. Blue: -2/-8°C (18/28°F) The king of grip waxes! A classic that has been in production for decades, still remaining relevant. In Finland Rex Blue has gained a legendary reputation, just ask any finnish skier! It is used widely as a universal grip wax on cold temperatures. Its grip and glide properties can be adjusted by the thickness of the wax layer. The colder the weather, the thinner the layer. Blue Special: -1/-4°C (25/34°F) Another Rex-legend. A bit softer and more gripping than Blue (115) for milder frosts. Provides a good grip even on hard and worn track. Purple: 0/-2°C (28/32°F) Despite of its purple color, this is a pure below-zero-temperature wax, which is used in race waxing as a coating for PowerGrip Green. A secure choice for recreational skiers. Red: +1/-1°C (30/34°F) Red kick wax for zero conditions. When mixed or used as a coating for klisters, gives great protection against icing on new or loose snow. Base Wax:? Very sticky and durable base wax under any grip wax. The most durable result is achieved by applying a wax with an waxing iron to roughened ski base.

The Racing Iron Mat is the perfect accessory for your waxing station. Eliminate smoking irons, keep your iron base lubricated, and prevent your iron from falling on the floor. For use only with Toko wax irons.

Start synthetic kick wax is suitable for both old and new snow. This base wax improves the durability of the waxing. Add layers of different kick waxes on top according to the weather, temperature, and snow conditions.

Any Nordic skier who enjoys fast skis will appreciate this gift! Here are some of the most important and popular waxing essentials in the Nordic ski world for glide waxing with hot wax plus a new liquid wax prep twist. Perfect for waxers that already have or are planning on getting a wax profile , wax iron, and a wax iron. In this gift pack: Rex Glide Cleaner Liquid prep for base cleaning and priming for gliders. This represents the "new school" of ski waxing tech. Wipe Rex Glide Cleaner onto the base of the ski and allow to dry thoroughly. After drying, a thin wax layer is left behind as a "primer " layer for later waxes. Two legendary iron-in glide waxes - Start Green for the cold days and Rex Blue for everything else. A fresh, sharp New Moon Wax Scraper - time to retire those old, dull scrapers. Toko Groove Pin - handles grooves of all shapes and sizes: perhaps the handiest little tool at the wax bench! Now that the skis are all waxed up, protect them with some New Moon Ski Sleeves - they keep those fast bases safely separated for the drive to the trail! And for a great trail-head conversation starter, a New Moon Bumper Sticker!

For peeling Ptex from the base to remove scratches and gouges and to uncover fresh base material for better wax absorption. Also removes burned base material resulting from overheating in the waxing process. Comes pre-sharpened with a nice burr for making scraping a breeze. Easily resharpened on a diamond whetstone.

Kit containing all of the essentials for waxing Base Performance Liquid Paraffin. Contains 1 each of Base Performance Liquid Paraffin Yellow, Red, and Blue, a Base Performance Hot Wax Blue 120g, and a Yellow Liquid Paraffin Polishing Brush all in a high quality cordura zippered bag.

Rub-on wax for all types of snow and temperatures. - Improves sliding properties and cares for the base - Polish in using the cork on the back of the package or TOKO Thermo Cork - Very convenient for waxing en route - Very convenient for the care of ski skins to prevent the formation or adhesion of ice - Also used as rust protection for ski edges

Ideal for removing kick wax and klisters and cleaning up filthy ski bases. Also excellent for cleaning tools. Remember, avoid using base cleaners on a well-waxed base unless extremely dirty. This does not apply to the kick zone on classic skis. Purge waxing is always advised for cleaning well-waxed bases. 250ml aerosol spray can.

Quality, easy to adjust waxing profile. Same profile in front and back. Lightweight aluminium. Front and back part are both adjustable. Fixation in binding. Takes both classic and skating skis from 140 cm to 210 cm. Fits to T0079-1 legs or T0790-K clamps. Weight: 3 kg/6.6 lbs. Length of main stem approx. 1,61 meters.

The microprocessor control on this iron guarantees excellent temperature control. It heats quickly and is easy to use. The temperature range from 90° – 160° makes waxing safe for skis, even if you are not a prefessional skiman. Although this iron has a very interesting price range, it is entirely produced and tested in the STAR laboratory in Italy with the same technology and care that is applied for the top of the range.

Rex G-series spray gliders are special fluoro-free versions of our most advanced HF gliders. They feature all the technology advantages of Rex HF-series, without the use of fluoro compounds. Approved for use in junior racing in countries where fluorinated waxes are prohibited. In low moisture and artificial snow, the performance is almost on par with HF series, with similar durability. G-series gliders are great waxes for fast training and junior racing. Likewise to our HF Sprays, they are the most wax-containing liquid gliders on the market and do not need hot waxing to support their durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. G41 – Taking a step ahead and breaking the boundaries set by hot waxing! The new G41 Spray is not limited by the requirements set by hot waxing and scraping. The Special UHW wax is only possible to apply in liquid form. Being the hardest glide wax on the market, it gives unseen performance on artificial and coarse snow, and also on cold dry snow. 435 G41 UHW Pink/Green +5…-20°C Rex G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial 439 G21G "New Snow" Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology.. Never has Rex non-fluorinated glide wax been this fast! 437 G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast! 436 G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -particles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Never has Rex non-fluorinated glide wax been this fast!

Teal 500g HS-10 (-5F to 15F): 500g bulk bar is ideal for families, teams or skiers using large quantities of wax. "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Great wax for economically and effectively hardening ski bases for cold weather, and applies easier than extreme white. Comparable to Swix CH5X. Blue 500g HS-20 (12F to 28F): Bulk bar for high-volume waxing; high school teams take note! Fast Wax Blue is one of our more popular choices as a "universal" glider for waxers looking for a simple set-up and for hardening bases as an underway for a harder HF. Comparable to Swix CH6X. Red 500g HS-30 (22F to 32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. Yellow 500g HS-40 (30F to 50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.

Blue 600g Ultra Glide (14F to 30F) New Moon all-time best seller! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. super reliable choice for base waxing and training. Violet 600g Ultra Glide (23F to 32F) Popular glide wax in the 20s to mid=30s, especially on humid snow. Highly durable like its companion, Rex Blue.

Ideal for removing kick wax and klisters and cleaning up filthy ski bases. Also excellent for removing wax residue from scrapers, rillers and other tools. Remember, avoid using base cleaners on a well-waxed base unless extremely dirty. This does not apply to the kick zone on classic skis. Purge waxing is always advised for cleaning well-waxed bases. Aerosol for easy application.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Oslo kickers have quickly become some of New Moon's most popular kick waxes due to their reliable and forgiving kick in widely varying conditions. Designed with Norwegian snow conditions in mind where elevation and North Atlantic storms create complex waxing. For coarse, abrasive, or man made snow turning into powder as elevation or race conditions change. Can be corked in trailside! Non-fluorinated. Comes in: Super Green (5F to 19F) Extra Blue(18F to 28F) Purple (27F to 36F)

Protect your investment! Everyone, absolutely everyone, should be wearing respirators at all times when waxing. Not just for guys on the World Cup; every breath of fumes is one too many. Filters organic vapors, acid gases and particulates. Filters included. Non-returnable once packaging is opened. Face mask includes 1 pair of filter cartridges. Just install cartridges provided and it is ready for use. * Note: These respirators are intended for filtration of organic chemicals. They are not proven effective for viruses or other pathogens.

The best ever of the STAR waxing irons for professional use. This appliance with a full 25 mm die cast aluminum plate and 850 watt power is managed with the fastest electronic processor and is ideal on any type of skis and for all ski waxes. This iron offers the maximum that you could desire: optimized plate for applying powder fluor wax, new bigger and high brightness display,”touch” buttons to easily set temperature, absolute thermal control, and perfect ergonomic balance. Temperature range 90 – 200 C.

Original Blue 5º- 28.4ºF The king of glide waxes! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. Undefeatable choice for base waxing and training. Often the best solution for a recreational skier. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush. Original Purple 28.4º…41°F Popular glide wax from zero to mild frosts, especially on humid snow. Apply onto ski base that has been treated with Rex Glide Cleaner, let dry and brush with a nylon brush.

Green 86g Ultra Glide (-18F to 20F) A reliable wax for colder temperatures and conditions where harder wax is needed, e.g. icy tracks or dirty snow. A long-time favorite of die-hard Nordic skiers everywhere. Blue 86g Ultra Glide (14F to 30F) New Moon all-time best seller. Legendary Rex Blue is one of the best non-fluorinated gliders for decades running. An ideal choice for base waxing and training. Violet 86g Ultra Glide (23F to 32F) Popular glide wax for the 20s to mid-30s, especially on humid snow. Excellent durability. Red 86g Ultra Glide (32F to 50F) Softest of the Rex gliders, and therefore suitable for soft tracks and wet new snow.

NEW Fluor free version of Glide Cleaner. Cleanses the base as well as Rex Remover, but without making the base turn gray and dry. Apply generously to cloth or fiberlene, wipe the base clean and let dry for 2-3. minutes. Brush well with a nylon brush. After treatment, Rex Glide Cleaner leaves a very hard and thin layer of Rex UHW hard wax, that acts as an excellent binder for both liquid and solid paraffin waxes. Always start a new glide waxing by cleaning with Rex Glide Cleaner. It will make the attachment and durability of sequent wax layers considerably better. Glides well even on its own on dirty and artificial snow, that is usually found in ski tunnels.

Hot waxing is an increasingly popular method for lubricating bicycle chains. The solid wax does not collect dirt, keeping the entire transmission of the bike clean and repelling dirt more effectively than traditional chain lubes. BLACK DIAMOND HOT WAX combines Black Diamond’s proven effective additive technology with over 70 years of wax experience from Rex. By switching to hot waxing, bike cleaning becomes much easier, and drivetrain component wear is dramatically decreased in long-term use. Hot-waxed chains don’t stain and do not require powerful solvents for cleaning. Instead, they can be easily cleaned with hot water only. We transformed the already thoroughly tested and effective Black Diamond additive technology onto a solid Rex wax base. To ensure high manufacturing quality, we put all the Black Diamond additives into one black piece, which is hand-cast in our product development laboratory in Hartola. The black additive piece can be thought of as a bottle of Black Diamond chain lube in solid form! The eleven white Rex paraffin blocks, carefully selected for their wax mixture, are combined with the additive block to guarantee the best lubrication performance on the market. By melting all the pieces (11+1 blend) together, you get a wax mixture that works perfectly in all conditions. For an extremely durable mixture for even the longest rides and races, melt the black additive piece with four pieces of base wax (4+1 blend). The remaining seven blocks of wax can be used as a cleaning pre-treatment wax to keep the 4+1 blend clean and maintain its high performance for longer. With the two-stage wax treatment option in one package, you get everything you need for optimal chain lubrication.

In the Kit: -Start Ultra Gel Yellow Wax 50ml wipe-on.14 to 41 F. Universal warm liquid glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Start Ultra Gel Blue Wax 50ml wipe-on. 10 to 28 F. Universal cold liquid glider. Wipe on, let dry, brush lightly. Certified non-fluoro wax. -Rex Glide Cleaner 170ml. Cleans and primes base for further waxing. Wipe on, let dry, brush lightly. Free New Moon Ski Ties and Bumper Sticker. Good at all temps and snow snow conditions! *With all liquid prep and liquid waxes, apply at room temp and allow to dry completely. Brush lightly with soft nylon or horsehair brush before skiing. Stiff nylon brush will also work fine.

ULTRASONICALLY TREATED IN REX R&D LAB The secret of this new lube is the Black Diamond particles that are mixed into the lube in a time-consuming ultrasonication process at our factory’s Racing Service lab. The Black Diamond particles significantly improve the properties of the lube: Lower friction, lower wear and increased rain resistance. In continuous metal-to-metal contact that occurs in drivetrain while riding, the particles form an ultra-thin and hard layer that minimizes friction and wear, and is also waterproof NEXT LEVEL COMBINATION OF DRY AND WET WEATHER PERFORMANCE Previously, seeking for the lowest possible friction in a chain lube has meant sacrificing all-weather performance. So-called “wet” lubes have traditionally been very energy-stealing. Rex Black Diamond combines test-winning friction levels with strong weather resistance in a previously unseen way. Black Diamond has been tested in demanding race conditions by our elite athlete team. The true king of chain lubes! N-KINETIC™ WAX FEATURING THE LATEST RACE SKI WAX TECHNOLOGY They have upgraded the wax blend used in Black Diamond lube to the same Rex N-kinetic™ technology that is used in the best cross-country ski waxes. The slightly lower viscosity results into lower friction and better lube penetration into the chain. Rex is well known for its world cup level fluorinated ski waxes and is an expert in paraffin wax-based applications with six decades’ worth of experience. WAX BASED SOLVENT-FREE, NON-VAPORIZING, UNDILUTED Adding solvent or water to a chain lube is generally thought to be a great way to reduce manufacturing cost and giving the manufacturer a better margin. At Rex, we think otherwise. Every drop you apply on the chain is 100% lubricant and not something that will evaporate into the air. Unlike with most chain lubes, there is no need to wait until the solvent evaporates before you can ride your bike. UP TO 30 WAXINGS FROM A SINGLE BOTTLE UP TO 500 KM WITH ONE WAXING

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Fluor-free versions of HF11 & HF21 Spray . On low moisture and artificial snow, its performance is almost on par with HF series, with similar durability. Great wax for training and junior racing. Fullfills the requirements set by Norwegian Ski Association for junior XC racing. Likewise our HF Sprays, it is the most wax-containing liquid glider on the market and does not need hot waxing to support its durability. Fills small imperfections in base material like hot wax, reconditions and replenishes. Never has a non-fluorinated wax been this fast. Ample 150 ml aerosol packaging. G11 Yellow Spray +10…-2°C Non-fluor version of HF21 Yellow, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Blue Spray -2…-12°C Non-fluor version of HF21 Blue, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G21 Graphite Spray +2…-12°C For new snow. A non-fluor version of HF21 Graphite, with all the top wax technologies like N-Kinetic™ -nanoparticles, Power Polymers™ advanced wax blend and 2-Step Carrier™ solvent technology. Economical in use, thanks to ample 150 ml packaging. Never has Rex non-fluorinated glide wax been this fast! G41 UHW Pink/Green +5…-20°C Rex G41 UHW – THE HARDEST GLIDE WAX ON THE MARKET. G41 is an extremely hard and wear-resistant glide wax that offers top -level performance both on cold and weary snow, and also on coarse wet snow and icy crust. Rex 2-Step Carrier™ solvent technology enables the applying of UHW™ ultra-hard glide wax, without the limitations set by hot waxing and scaping. For long distances and weary conditions, also great for alpine skis and snowboards, where wear resistancy is crucial.

Best Fit Form Skier Profiles Profile: 3-5 *Does not include bindings. Be sure to order bindings if needed. The TS Carbon Pro features a shorter and wider skin profile designed to provide a secure kick while maintaining high-level glide. Constructed using Cold Base Bonding technology, the base provides better waxing and grindability to maximize speed. FEATURES -100% mohair skin for maximum glide -Twin Skin strips offer solid grip -Lightweight Air Core Carbon construction -Cold Base Bonding -Finish First -Prewaxed -Precision Pairing System -Computer Flex Control -Fischer Carbon Fiber -Twin Skin **Don’t worry about equipment sizing – If you're not sure which size to order, choose your best guess and fill out our Best Fit Form. You will be contacted if there are any questions.