Glide Wax

Pure Race liquid glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax processed with organic solvents gives excellent performance and good durability to the products in all weather conditions. At its best when used on top of PURE BASE WAX. After wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush and again with a nylon brush. POLAR: For cold, dry snow, -25/-5°C (-13/23ºF) COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

Liquid glide waxes will always perform better if a base preparation is done with an ironed-in paraffin or the use of a liquid base primer. Use the Pure Pro Base liquid base primer on a regular basis on new and stone grinded skis and from time to time during the season to get the most benefit and wear resistance from the liquid glide waxes. Liquid base wax doesn't need to be ironed in and can be used as a base for other liquid glide waxes and paraffins

PURE PRO liquid glide waxes are based on the ingredients used in the racing paraffin series and totally new additives, which give excellent performance and good durability to the product. PURE PRO liquid glide waxes have been developed especially for natural snow and fine-grained snow. With high-quality solvents, liquid waxes absorb effectively into the base and retain the performance of the ski base longer than hot melted paraffins. Is best when used on top of liquid base wax or traditional paraffin waxes. After the wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush and again with a nylon brush. COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) PRO WARM: For damp snow (26F - 44F) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

PURE PRO fluoro-free glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellence performance and good durability to the products in all weather conditions. Especially in natural snow. The PURE PRO POLAR Powder wax is Vauhti's best base for very cold natural snow. It is usually used as a base under a liquid or block (wool applied) top coats. -Temperature ranges of -13/23F (-5C/-25C). -Comes in a 35g container with a perforated lid for easy sprinkling. -Melts like a paraffin wax, unlike the bad-old fluoro powders, thus is used more of like a base wax, but is also used as a top coat in some situations

LDR For a wide temperature range and for variable conditions +5 to -10ºC (14F - 41F) Pure Race liquid glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate, and silicon wax processed with organic solvents give excellent performance and good durability to the products in all weather conditions. Especially for old and artificial snow. Best when used on top of PURE BASE WAX. After the wax has dried completely brush thoroughly first with a nylon brush, then with a brass brush, and again with a nylon brush.

Equivalent to very high fluoro race wax but without any fluorocarbon, Vauhti Pure Race Liquids are high-performance glide waxes that offer performance to meet the highest requirements of a competition-oriented skier. PURE Race Liquids have high-quality hydrocarbon, zinc stearate and silicone waxes and provide optimal performance for new and natural snow. WARM NEW SNOW For warm new snow +7 to -3°C (45 to 27°F) 80ml bottle with sponge applicator Sponge on. Brush out after curing Completely free of fluorine but equivalent to high fluoro top coats COLD For cold new snow -2 to -20°C (28 to -4°F) 80ml bottle with sponge applicator Sponge on, let dry, brush Completely free of fluorine but equivalent to high fluoro top coats LDR OLD SNOW For wide temperature range and for variable conditions (14F - 41F) LDR NEW SNOW LDR glide wax is best when the conditions are expected to change or vary over a ski course For cold snow +5 to -10°C (41 to 14°F) 80ml bottle with sponge applicator Sponge on, let dry, brush Completely free of fluorine but equivalent to high fluoro top coats OLD SNOW WARM for damp snow (26F - 44F) OLD SNOW COLD For cold snow conditions (-4F - 28F)

PURE UP liquid glide waxes are intended specifically for active skiers and competitive skiers for training rounds. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellent performance and good durability to the products in all snow types and weather conditions POLAR: For cold, dry snow, -25/-5°C (-13/23ºF) COLD: For cold snow conditions, -2/-20°C (-4/28º F) LDR: For wide temperature range and for variable conditions, +5°C/-10°C (14/41ºF) MID: For damp snow, +2°C/-4°C (25/36ºF) WARM: For damp snow, +7/-3°C | 45/27°F (100ML) WET: For wet and damp snow down to zero degrees, +10°C/-1°C(30/50ºF)

For treating backcountry and cross country racing skis so they do not freeze, saturate with water, or collect dirt. ECO friendly formula.

For all snow conditions and temperatures Good sliding properties in all snow conditions Prevents the base from drying out Biodegradable Without the addition of fluorine Protects against dirt accumulation and oxidisation during storage Resealable wax case Snow temperature 0 °C — -30 °C Air temperature 10 °C — -30 °C Volume 120 g

Contains 120g Base Performance Yellow, Red, and Blue, an Express Runer, a 3mm Plexiscraper, a Nylon Brush, a Red (fine) DMT Diamond Stone, and an Edge Grinding Rubber all in a nice kit bag!

Paste wax for all types of snow and temperatures. Features: • Improves sliding properties and cares for the base • Quick and easy to apply • With sponge applicator • Can also be applied on climbing skins, to prevent icing and snow adhering to the base • Also used as rust protection for ski edges

Universal liquid wax for cross-country skis with mechanical climbing aid. For all kinds of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski preparation at home Biodegradable

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 200 ml 6,76 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Ideal size for ski and snowboard preparation at home Biodegradable Also used as rust protection for ski edges

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 75 ml 2,54 fl oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator Comfortable pocket size to go and wax en route Biodegradable Also used as rust protection for ski edge

Universal liquid wax for all types of snow and temperatures. 0 °C — -30 °C 32 °F — -22 °F 40 g 1,41 oz Application and properties Based on natural raw materials Improves sliding properties and cares for the base Quick and easy to apply With sponge applicator and integrated polishing felt Comfortable pocket size to go and wax en route Biodegradable Also used as rust protection for ski edges

Performance racing paste wax for all snow types and conditions, fluoro free

Performance racing rub-on wax for all snow types and conditions/ fluoro free

Performance racing spray for all kinds of snow and temperatures. Application and properties Unbeatable acceleration values Very good sliding properties Ideal for ambitious winter sports enthusiasts Spray on and polish in using TOKO Thermo Cork 0 °C — -30 °C/32 °F — -22 °F

Rub-on wax for all types of snow and temperatures. - Improves sliding properties and cares for the base - Polish in using the cork on the back of the package or TOKO Thermo Cork - Very convenient for waxing en route - Very convenient for the care of ski skins to prevent the formation or adhesion of ice - Also used as rust protection for ski edges

IMPORTANT: This product is not for skin skis. Perfect for waxless skis! Helps prevent fresh, wet snow from sticking to the ski's waxless pattern. Simple and quick to use-- just wipe on, air dry and ski in about a minute. 100ml size stores easily in a pocket. Easy to reapply on the trail for longer skis. For a higher performance option-- consider Toko TF90 Paste . TF90 requires more application time and some buffing, but offers a step up in glide and durability.

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

Rapidly biodegradable hot wax, plant based, for all snow types and conditions.

Ecological hydrocarbon hot wax for training sessions and taking care of ski and snowboard bases. Biodegradable Resealable wax case Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F

Kit containing all of the essentials for waxing Base Performance Liquid Paraffin. Contains 1 each of Base Performance Liquid Paraffin Yellow, Red, and Blue, a Base Performance Hot Wax Blue 120g, and a Yellow Liquid Paraffin Polishing Brush all in a high quality cordura zippered bag.

Toko 100 ML Liquid Paraffin Wax - All the convenience of liquid application for training and racing. Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: for snow temperatures 18F/-22F 0-60% relative humidity. Red: for snow temperatures 28F/11F 40-80% relative humidity. Yellow: for snow temperatures 32F/25F 80-100% relative humidity.

Kit contains 120g Base Performance Yellow, Red, and Blue, a 3mm Plexiscraper, a Nylon Brush, a Red (fine) DMT diamond file, and a edge grinding rubber all in a nice case.

NEW PFC FREE Toko 125 ML Liquid Paraffin Wax. Where high performance meets convenience! Great for last minute wax changes! Best applied to a freshly waxed, clean ski at room temps. Blue: Hard liquid wax for snow temperatures -22/14 °F, air temp -22/16 °F. 0-60% relative humidity. Red: Medium hard liquid wax for snow temperatures 10/25°F, air temp 12/28 °F. 40-80% relative humidity. Yellow: Soft liquid wax for snow temperatures 21/32 °F, air temp 25/50 °F. 80-100% relative humidity. -Wide application range for common conditions in the medium snow temperature range. -Very long-lasting wax adhesion. -Can also be used as adhesion promoter for top finish products. -Fast processing. -For brushing/polishing use the Polishing Brush Liquid Paraffin

PFC Performance Hot wax for racing and practice sessions in all disciplines. Has a bonding agent for Top Finish products. Good sliding properties, durable and can be used as a base layer in races. This is the exact same product that is used and available at the World Cup and Olympic Games. The wax case is resealable. Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.

Performance Hot Wax for racing and training, fluorine free. - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) -Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.

PFC Free High performance racing hot wax to meet the highest demands. This is the same exact wax used at World Cup and Olympic events. Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F Universal: 3/32F, air temp. 3/36F Warm: 25/32F, air temp. 25/50 -Optimal sliding properties -Unmatched durability -Best bonding agent for Top Finish products -Resealable wax case

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F - Cold & Aggressive Snow Conditions Universal: 3/32F, air temp. 3/36F - Wide range of use in medium snow temperature conditions Warm: 25/32F, air temp. 25/50 - High moisture and wet snow conditions

Liquid paraffin wax at the performance level for racing and training. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

Gentle cleaning fluid for cross-country ski skins and touring skins. It removes all types of dirt and residue from the skins.

Everything you need to maintain your skins in great gliding condition and prevent icing on those tricky wet snow days. Kit includes: Eco Skin Proof -Keeps your racing, touring or BC skis so they do not freeze, saturate with water, or collect dirt. ECO friendly formula. Skin Ski Cleaner -Gently cleans skin ski hair patterns allowing better kick, especially on glazed trails. Formulated with special, skin-safe solvents that will not dissolve or soften the adhesives use for skin patterns. Use whenever skin pattern appears matted or discolored from debris. Simply spray on skin until damp, and wipe with cloth or base-tex from tip to tail. Allow to dry. Then, re-apply ski wax treatment before skiing. Base Tex -Special fleece for base cleaning and different types of polishing.

Toko X Cold Powder Additive is a very hard glide wax powder applied as a hardener and topcoat for superior glide in cold and abrasive conditions. Easy to apply- - simply sprinkle liberally on top of ironed-in layers of the wax of the day you and iron in. Also known as Nordlite Powder.

More sliding & less sticking! Simply wipe on the entire length of your waxless ski for better glide, less sticking and more fun. Containers stow easily. Don't leave home without 'em! Fluoro-free.

The HS series are great gliders for training and competition with very good glide properties. HS6 LIQ. BLUE, 10º/24.8F 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. Especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. Replaces CH6XL. HS7 LIQ. VIOLET, 19ºF/28F°, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. Replaces the CH7XL. HS8 LIQ. RED, 24.8ºF/39.2ºF 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. Replaces the CH8XL HS10 LIQ. YELLOW, 35.6ºF/50°F, 125ML A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as HS10L collect less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. Replaces the CH10XL DANGER H-sentence number: H222, H229, H319, H336 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About liquid HS6: A liquid training and competition slide wax that can be used alone or as a base for racing products. Specifically designed for cold conditions down to -12°C. At lower temperatures than this, traditional waxes are usually better than liquid products. HS6L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. How to apply HS6L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. - Amazing universal glide wax - For training and racing - Improves ski glide - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions

A hard and extra durable glide wax with additive for long distance racing. This block top coat is great in warmer conditions, but often competitive also in colder weather. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. Iron temperature 155°C/311°F. Marathon waxes can be used as a race wax alone or as a base for powders and other top coats.

A hard and extra durable glide wax with additive for long distance racing.The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. Marathon waxes can be used as a race wax alone or as a base for top coats. Iron Temp: 155°C (311°F). Pro: Developed especially for longer distances in newer and clean snow. Great in warmer conditions, but often competitive also in colder weather. Pro Black: Developed especially for wet dirty contaminated snow. The additive is reducing friction against dirt particles. Great in warmer conditions, but often competitive also in colder weather.

Fluor Free Liquid glide wax for skin skis. With a sponge foam applicator for easy application. Also available with a felt polisher for polishing and extra durability. A liquid glide wax for skin skis For all temperatures For everyone using skin skis Excellent glide in no time

The PS series are great gliders for training and competition with good glide properties. PS5 TURQUOISE, -.4°F/14°F The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. PS6 BLUE, 10ºF/21°F PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X PS7 VIOLET, 18°F/28ºF PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. PS8 RED, 24.8º/39.2ºF PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PS10 YELLOW, 32°F/50ºF PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). Replaces the CH10X.

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

Extreme durability! A great powder for extra cold conditions, that has high durability on aggressive snow and excellent dry friction properties. - Perfect on cold man-made snow - Easier to apply than corresponding cold waxes PSP is a special powder wax to add to other waxes to increase their durability, and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle the PSP powder over the wax. Even a generous amount will not affect glide. Then iron the powder into the wax layer. Allow cooling, then scrape and brush away the excess. Recommended iron temp: 150°C (302°F). Replaces the CH3X.

Keep your skins skis from grinding to a halt when wet snow, around freezing, can cause the skis to ice up so that Skin skis can be problematic in wet or dirty snow as the snow can stick to the skin and cause that nasty situation of a ski that doesn't grip but also doesn't glide. Skin inserts need occasional treatment to resist this situation and of course Swix has come up with a solution that is easy to use and performs admirably. Application: Rub on to the skin using a back and forth motion to coat the hairs of the skin. Dry for 30 min. before skiing or applying Swix Skin Boost.

The TSB series are gliders for competition that work extremely well, and are highly durable, on dirty snow and in dry, high friction conditions. This is achieved thanks to the black solid lubricant additive that reduces friction and absorbs less dirt in contaminated snow. Its hardness makes it convenient to work and highly durable. TSB series can be used as a race wax alone or as a base for top coats. -TS5B - 0/14F is the hardest wax in the TSB line and is a great choice in cold conditions. Recommended iron temp.: 160°C (320°F) -TS6B - 10/21F is the second hardest wax in the TSB line and is a great choice in typical winter conditions. Recommended iron temp.: 155°C (311°F). -TS7B - 17/28F is a versatile wax suited for normal winter conditions below the freezing point. It has shown good properties on artificial snow in addition to natural, transformed older snow. Recommended iron temp: 150°C (302°F). -TS8B - 24/39F is made harder than the std TS8. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. Recommended iron temp: 150°C (302°F). -TS10B - 32/50F is made harder than the std. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. Recommended iron temp: 165°C (329°F). APPLICATION The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax.

Swix TSP5 Turquoise -10 / -15 40g. (5ºF-14ºF) TSP5 is the hardest powder in the TSP line and is an excellent choice in cold conditions, both for cross-country and alpine. It is a favorite among servicemen due to its superior durability and dry friction properties. It is made as a powder to make it easier to apply, without compromising the sliding properties. For fresh snow, converted snow and artificial snow. TSP05 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C TSP6 is a very good powder for both alpine and cross country, which has shown great performance on artificial snow in addition to natural snow. TSP7 is a versatile powder suited for normal winter conditions below the freezing point. For fresh, old or man made snow. Good in clean snow. TSP7 can be used as a race powder alone or as a base for top coats. Swix TSP8 Red Fluoride Free Powder -4/4 40g (24.8ºF - 39.2ºF) TSP8 has a softness and unique formulation that makes it perfect on both sides of the freezing point. TSP8 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C. Swix TSP10 Yellow Fluoride Free Powder 40g (32ºF-50ºF) TSP10 is an excellent powder for wet conditions. Especially newer or transformed snow that gets wet for the first time. Despite being a fairly soft powder, the abrasion resistance is very good, and the powder handles long distances well. The speed of the grease gun should be approx. 8-10 sec. on an ice skate or alpine ski. It is important to have a good lubricating iron to get the powder to melt efficiently. TSP10 can be used as a racing powder alone or as a base for toppings. Recommended lubricating iron temperature: 180-200 ° C.

Swix Top Speed waxes offer the ultimate in fluoro-free glide and durability. A proprietary mix of non-toxic additives make these waxes a viable replacement to fluorocarbon race waxes. Swix TS6 Liquid spray-on racing wax developed for use in colder conditions. This product works best when humidity is high. Can be used alone or as a topcoat. TS6L LIQUID BLUE -4ºC to -12ºC (25ºF to 10ºF) Cold condition liquid wax. Fluoro Free. 50ml/1.7 fl. oz. Swix TS7 Liquid is a spray-on racing wax developed for use in colder conditions. This product works well in high or low humidity. Can be used alone or as a topcoat. TS7L LIQUID VIOLET -2ºC to -8ºC (28ºF to 18ºF) Liquid wax for use below freezing point. Fluoro Free. 50ml/1.7 fl. oz. Swix TS8 Liquid is a spray-on racing wax developed for use in colder conditions. The wide temperature range makes it very versatile. Can be used alone or as a topcoat. TS8L LIQUID RED -4ºC to 4ºC (25ºF to 39ºF) Straddles the freezing point. Fluoro Free. 50ml/1.7 fl. oz. Swix TS10 Liquid is a spray-on racing wax developed for use in colder conditions. A great wax for wet, transformed snow, especially when snowpack is contaminated as the liquid tends to pick up less dirt than paraffin-based waxes. Can be used alone or as a topcoat. TS10L LIQUID YELLOW 2ºC to 10ºC (36ºF to 50ºF) For wet, transformed snow. Fluoro Free. 50ml/1.7 fl. oz.

Fluoro Free The newest test waxes from Star. High-end World Cup Performance.

Designed as a base prep for durability over long distances in cold, dry, abrasive snow conditions. Temp range: -5/-20°C or -4F/23F

Star's new Next Fluoro Free waxes offer world cup level glide using a completely fluoro free compound that's easy to apply and cures quickly. The enormous success of liquid paraffins with Dry Fast Technology has been combined with the use of new, and already successful additives used in the NEXT Powder line. To apply just shake the bottle, sponge a film of liquid onto your skis wait 1 minute for drying. You can then simply brush with a fine nylon brush. For maximum performance and durability Star recommends polishing with a wool roto-brush fleece. 100ml, sponge head for easy application while minimizing waste. For snow temperatures: Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 100G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 28G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]

Start Anti Ice Glider is liquid icing prevent glider created especially for no wax skis based on nanotechnology. Anti Ice is packed in handy plastic bottle equipped with sponge to ensure easy and equal apply to the ski base. After applying let dry about five minutes and ski is ready for use. Anti Ice Glider improves gliding in no wax skis without reducing grip abilities. Treatment with silicon content liquids are not recommended by ski produces. One treatment with Anti Ice is enough for ten kilometer skiing.

SG 10 GREEN (-22F to 14F): The gold-standard for cold weather glide wax. Start Green is incredibly hard. Ideal for ultra-cold temps with abrasive, fresh snow.Caution! Start Green is incredibly hard - apply carefully so you don't overcook your base. Keep the iron very hot so that you can move quickly over the ski without dwelling iron the ski to melt each spot. Requires a sharp, fresh scraper to scrape effectively. SG 8 BLUE ( 10F to 20): A great basic glider for training and racing when humidity is <55%. SG 6 PURPLE (20F to 27F): A great basic glider for training and racing when humidity is <55%.

All new Start RG Glider series are next generation, fluoro free, technoceramic gliders. RG Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)

RED 10°...-2°C (50°...28°F) 70...100% 80ml PURPLE -2°...-8°C (28°...18°F) 65...100% 80ml BLUE -6°...-15°C (21°...5°F) 55...100% 80ml

All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Race Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Race Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Race Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Race Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)