Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Block Gliders

Star Next Fluoro Free Racing Powder - 100G
$118.00 - $425.00
Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 100G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]
Swix TS10 Black, 0°C/+10°C
$69.99 - $300.00
TS10B - Top Speed 10 black. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS10B is made harder than the std. TS10, as the adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. TS10B can be used as race wax alone, but is often used as a base for top coats. Recommended iron temp: 165°C (329°F). Replaces the HF10BWX
Swix TS5 Black, -10°C/-18°C
$69.99 - $300.00
TS5B - Top Speed 5 Black. Excellent dry-friction properties! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F)
Swix TS7 Black, -2°C/-8°C
$69.99 - $300.00
TS7B - Top Speed 7 Black. A great racing wax for typical winter conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS7B is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS7B can be used as race wax alone but is often used as base for top coats. Recommended iron temp: 150°C (302°F).
Swix TS8 Black, -4°C/+4°C
$69.99 - $300.00
TS8 - Top Speed 8 red. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS8B is made harder than the std TS8. The adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS8B can be used as race wax alone but is often used as a base for top coats. Recommended iron temp: 150°C (302°F).
Toko PFC Free WC High Performance Hot Wax 120gm
$148.00
PFC Free High performance racing hot wax to meet the highest demands. This is the same exact wax used at World Cup and Olympic events. Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F Universal: 3/32F, air temp. 3/36F Warm: 25/32F, air temp. 25/50 -Optimal sliding properties -Unmatched durability -Best bonding agent for Top Finish products -Resealable wax case
START RG Ultra Block Glider - Green 60G
$100.00
All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Ultra Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F)
Fast Wax 500gm Fluoro Base Prep
$95.00
Fast Wax Fluoro Base Prep I is specifically designed to prep skis for waxing. Engineered with the elite / competitive skier in mind, it complements the Fluoro Hot Box Wax with the same excellent results, exceptionally fast skis right from the start. Iron in before waxing or hot box at 160° F to anneal and harden the bases. Fast Wax Fluoro Base Prep is a blend of our specialty micro wax, combined with hard waxes and our unique polyethylene based fluorinated compound to add speed and durability to skis. Waxing with Fluoro Base Prep makes for fast durable skis.
Toko Core Tune and Wax Kit
$93.20 $145.00 36% Off
Contains 120g Base Performance Yellow, Red, and Blue, an Express Runer, a 3mm Plexiscraper, a Nylon Brush, a Red (fine) DMT Diamond Stone, and an Edge Grinding Rubber all in a nice kit bag!
Rex Non-Fluoro 600g Bulk Ultra Glide
$84.00
Blue 600g Ultra Glide (14F to 30F) New Moon all-time best seller! Legendary Rex Blue is one of the best non-fluorinated gliders in the world. super reliable choice for base waxing and training. Violet 600g Ultra Glide (23F to 32F) Popular glide wax in the 20s to mid=30s, especially on humid snow. Highly durable like its companion, Rex Blue.
Swix Pro Marathon Black
$80.00
Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax
Vauhti Pure Pro Polar Powder 35G
$78.00
PURE PRO fluoro-free glide waxes are intended specifically for competitive skiers and demanding active skiers. High-quality hydrocarbon ingredients, zinc stearate and silicon wax gives excellence performance and good durability to the products in all weather conditions. Especially in natural snow. The PURE PRO POLAR Powder wax is Vauhti's best base for very cold natural snow. It is usually used as a base under a liquid or block (wool applied) top coats. -Temperature ranges of -13/23F (-5C/-25C). -Comes in a 35g container with a perforated lid for easy sprinkling. -Melts like a paraffin wax, unlike the bad-old fluoro powders, thus is used more of like a base wax, but is also used as a top coat in some situations
Fast Wax Thunderbolt Plus Series 80g
$70.00
The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. The Thunderbolt Plus is a blend of paraffin wax and two non-Fluorocarbon speed additives. It is a non-Fluorocarbon replacement for the HSF line of Fast Wax. Use when humidity is greater than 50%. The second additive when combined with Thunderbolt gives this wax increased durability and glide. Thunderbolt Plus 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt Plus 20 • Peak Range 12° to 28° F • Iron Temperature 284° F Thunderbolt Plus 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt Plus 40 • Peak Range 30° to 50° F • Iron Temperature 257° F
Rex HF 11 Yellow Glide Wax 40g (28F to 36F)
$70.00
For new and old snow. The softest wax on HF -series. Compared to traditional warm condition HF gliders, the HF 11 is relatively hard and not so oily wax. Easy to apply and extremely dirt repellent.
Rex HF 21 Graphite Glide Wax 40gm (10F to 36F)
$70.00
Engineered especially for new snow, containing a precisely defined amount of graphite. Hardness is positioned between HF11 Yellow and HF21 Blue. Scrape when still warm, let cool down and brush.
Rex HF 31 Green Glide Wax 40g (-4F to 18F)
$70.00
For all snow types. Hard and very durable HF glider for cold conditions. Due to its hardness, it is very durable and abrasion resistant even in warmer conditions.
Rex NF21 Limited Edition - 40g
$69.95
LIMIT ONE PER CUSTOMER New from the World Cup testing rigors; beating the old HF21 in new and old snow types. Very effective both above and below the indicated temp range. Use a high-quality, high temp iron. Temp Range: 10/28F -8/-2C
Rex RG Block Glider 40g
$68.25
RG22 Blue -2…-8°C For all snow types. Developed for mild to medium frosts, the RG22 is our all time fastest fluor free wax! As a block it is hard, but still easy to melt. Developed especially as an underlayer for top coatings, but works extremely well also as a final layer. Scrape while still warm, let cool down and brush. Melting point: ~135°C RG32 Green -8…-20°C For all snow types. A hard and very durable glider for cold conditions. Due to its hardness it is very durable and abrasion resistant. A fluor-free version of HF31 block, that has been upgraded with N-Kinetic level 2 additives. Scrape when still warm, let cool down and brush. Melting point: ~140°C RG12 Yellow. +2…-2°C For all snow types. The softest wax on RG-series. Compared to traditional warm condition gliders the RG12 is relatively hard and not so oily wax. Melting point: ~130°C RG22 Graphite - New Snow Engineered especially for new snow and contains a precisely defined amount of graphite. Hardness is positioned between RG12 Yellow and RG22 Blue. Melting point: ~130°C.
Toko PFC Free WC High Performance Wax 40g
$55.00
Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case Snow temperature recommendations: Cold: -11/10F, air temp. -4/14F - Cold & Aggressive Snow Conditions Universal: 3/32F, air temp. 3/36F - Wide range of use in medium snow temperature conditions Warm: 25/32F, air temp. 25/50 - High moisture and wet snow conditions
Toko PFC Free Performance Hot Wax 120gm
$50.00
PFC Performance Hot wax for racing and practice sessions in all disciplines. Has a bonding agent for Top Finish products. Good sliding properties, durable and can be used as a base layer in races. This is the exact same product that is used and available at the World Cup and Olympic Games. The wax case is resealable. Snow temperature recommendations: Yellow 32F to 21F Red 25F to 10F Blue 14F to -22F Black for use in dirty or aggressive snow. Either use by itself or mix with the “wax of the day”.
START RG Race Glider Block 60g
$48.00
All new Start RG Racing Glider series are next generation, fluoro free, technoceramic gliders. Advanced mixtures of numerous ceramic compounds influence the nano structure of the gliding surface to reduce both wet and dry friction with new levels in durability. Additionally graphite additives enhance performance in new snow while Molybdenum additives enhance performance in old, transformed and artificial snow. RG Race Green: Snow Temp: -10°...-25°C (-13°/14°F) Humidity: 55...100% Iron Temp: 150°C (302°F) RG Race Blue: Snow Temp: -6°...-12°C (10°/21°F) Humidity: 55...100% Iron Temp: 140°C (284°F) RG Race Purple: Snow Temp: -2°...-8°C (18°/28°F) Humidity: 55...100% Iron Temp: 130°C (266°F) RG Race Red: Snow Temp: 7°...-3°C (27°/45°F) Humidity: 55...100% Iron Temp: 120°C (248°F)
Fast Wax Non-Fluoro HS 500g
$47.50
Teal 500g HS-10 (-5F to 15F): 500g bulk bar is ideal for families, teams or skiers using large quantities of wax. "Mid-cold" teal is a reliable and economical training wax for abrasive snows in the teens and single digits. Great wax for economically and effectively hardening ski bases for cold weather, and applies easier than extreme white. Comparable to Swix CH5X. Blue 500g HS-20 (12F to 28F): Bulk bar for high-volume waxing; high school teams take note! Fast Wax Blue is one of our more popular choices as a "universal" glider for waxers looking for a simple set-up and for hardening bases as an underway for a harder HF. Comparable to Swix CH6X. Red 500g HS-30 (22F to 32F) This broad-range training wax will work well from slightly above freezing and even down into the teens if the snow is somewhat transformed. Yellow 500g HS-40 (30F to 50F) Soft glider for wet, clean snow and also a great summer storage wax. 500g bar available for high volume waxing.
Star Next Fluoro Free Racing Powder 28G
$45.00
Following restrictions imposed on the use of fluorinated products in some competitions, STAR has designed a line of Fluor Free Products specifically dedicated for competition, called NEXT. Fluoro Free Powders : -High-end waxes for competition. -Completely free of fluoro. -Easy to apply. -No product waste. -Wide thermal range. -Exceptional durability for long distances. NEXT is the first choice for those looking for racing products with alternative additives to fluoro. The best synthetic paraffins combined with new additives make these products unique in their kind, guaranteeing unthinkable performance for a product without fluoro. Tests have shown that these products maintain their lubricating characteristics for many kilometers even in dirty, abrasive or difficult snow conditions. The presentation in micronized powder form makes the application easier and more precise with less product waste. 28G. Warm: 23 to 32F [0° / -5°C] Medium: 17 to 27F [-3° / -8°C] Cold: 10 to 21F [-6° / -12°C] Polar: -4 to 14F [-10° / -20°C]
Rode Endurance Fluoro Free Long Distance Glider
$24.00 - $44.00
A hard but hydrophobic formula from the Italian race wax wizards. Gaining popularity as a go to base coat and hardener. Excellent for ski marathons with wide range performance in cold starts and warm afternoons. Fluoro-free, hydrocarbon-based wax specifically created to last a long time in any snow condition and humidity while maintaining a stable performance over the course of kilometers and time. It can be used alone or as a base for liquids and top finishes. Requires a high iron temperature of 155C Compliant with the new EUROPEAN STANDARDS ON CHEMISTRY in force from 4/7/2020
Swix PS Polar
$12.99 - $40.00
A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).
Swix X Low Fluorocarbon 180g
$40.00 $70.00 43% Off
The XLF series of waxes can be used as training waxes, as racing waxes with Cera F as a final layer or alone as a race wax at very low temperatures. (Also available in 180gm bars) LF4X: Temperature range: -25F-10F, Recommended iron temp: 155C (311F).Ski bases melt at 150C so apply this wax with a good iron and move quickly. Don't linger on the base! A cold wax for dry friction conditions. It performs very well on artificial snow and has a great durability. LF4X can be used alone as a race wax when the air humidity is low. In the warmer part of the temperature range, and when air humidity is high, a top coat of Cera F FC04X will increase the performance. LF5X: Temperature range: 7F to 18F, Recommended iron temp: 150C (311F). LF5X is easier to apply than LF4X. It provides outstanding glide properties within its temperature range, and has a great durability. LF0X can be used as a race wax alone, but is often used as a base for Cera F FC05X . LF6X: Temperature range: 14F to 23F, Recommended iron temp: 145C (293F). This wax is very versatile. Its area of use stretches from a base for Cera F to racing wax and base prep wax for cold skis. LF6X has a good durability and offers great performance on artificial snow. When used as a base for Cera F, we recommend the new Cera F FC06X powder . LF7X: Temperature range: 18F to 28F, Recommended iron temp: 140C (284F). Performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. When used as a base for Cera F, we recommend the new Cera F FC07X powder . LF8X: Temperature range from 25F to 39F, Recommended iron temp: 130C (266F). A great wax for both base prep and training. It can also be used as a race wax, preferably with Cera F FC08X on top. Easy to melt and very convenient to work with. LF10X: Temperature range: 32F to 50F, Recommended iron temp: 120C (248F). A bit harder than the old LF10, LF10X is more durable. It's a good wax for base prep wax as well as a great training wax. For racing we recommend to go with high fluoro wax in this temperature area, but with the Cera F FC10X powder on top LF10X can be used with a good result.
Star Map Black - Graphite Base Wax 60G
$36.00
Designed as a base prep for durability over long distances in cold, dry, abrasive snow conditions. Temp range: -5/-20°C or -4F/23F
Fast Wax Thunderbolt Series 80g
$32.00 - $35.00
The new Fast Wax line of THUNDERBOLT and THUNDERBOLT PLUS race waxes, provides excellent speed additives that are better for the environment and still provide break neck speed and all day durability. Thunderbolt utilizes hydrophobic ceramic nano-spheres. When these spheres make it to the surface of your ski the high surface area provides more water repelling power where you need it most. Not only does this new additive repel water, its super strong structure provides superior abrasion resistance. Making snow conditions less of a factor in your quest for speed! Thunderbolt is the non-Fluorocarbon replacement for the HSLF line of Fast Wax, waxes. Use when humidity is greater than 30%. Engineered for durability and speed as well as base protection with dirt repelling properties. Thunderbolt 0 • Peak Range -30° to 8° F • Iron Temperature 284° F Thunderbolt 10 • Peak Range -10° to 15° F • Iron Temperature 284° F Thunderbolt 20 • Peak Range 12° to 28° F • Iron Temperature 275° F Thunderbolt 30 • Peak Range 22° to 38° F • Iron Temperature 266° F Thunderbolt 40 • Peak Range 30° to 50° F • Iron Temperature 257° F
Swix HS Fluoro-Free Wax System 60g
$34.99
The HS series are great gliders for training and competition with very good glide properties. HS5 TURQUOISE, -.4°F/14°F The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors, in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) HS6 BLUE, 10ºF/21°F HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). HS7 VIOLET, 18°F/28ºF HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 140°C (284°F). HS8 RED, 24.8º/39.2ºF A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). HS10 YELLOW, 32°F/50ºF HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).
Toko X-Cold Powder Additive Wax 50gm
$33.00
Toko X Cold Powder Additive is a very hard glide wax powder applied as a hardener and topcoat for superior glide in cold and abrasive conditions. Easy to apply- - simply sprinkle liberally on top of ironed-in layers of the wax of the day you and iron in. Also known as Nordlite Powder.
Page 1 of 2 Next page